I installed the 10532 build, but I have a little problem with Edge : when I connect to Facebook, I can't navigate quickly, sometimes it freezes, and I must clic several times with my mouse if I want to write any comment.
View 1 RepliesI have a new configuration (z170 chipset, i3-6320, fast SSD) for my desktop and it boots slower than my laptop (Acer V3-574G (i7-5500) with the same SSD as my desktop). I don't think the i3-6320 vs i7-5500 can explain such difference.First thing is that Hibernation and Fastboot are activated but not working on my dektop PC: command "Get-WinEvent -ProviderName Microsoft-Windows-Kernel-boot -MaxEvents 10 | Where-Object {$_.id -like 27}" gives me 0x0 (cold boot from full shutdown). Parameters ares ok in settings and in registry (hiberboot = 1).I tried using Fast boot and MSI fast boot in the bios: no effect. I tried to enable win10 whql in bios but it is disabled after rebooting, with a warning message saying that my graphic card does not have GOP.So, I'm not able to fast boot due to an "old" hd7750 graphic card ?
View 9 RepliesHow to enable fast startup without enabling hibernation windows 10?
View 2 RepliesI do need password protection but I also need the screen to give me a little more time! I am required to enter a password after only about a minute of inactivity.
View 4 RepliesDifferent usb keyboard from original not recognized...
View 1 Repliesi just realise my laptop got a window 10 upgrade for free.My internet speed is not very fast, everytime i close and open it, it restart from 0%My internet download has no limit but its just not very fast...So can i pause and resume the download??
View 14 RepliesI'v got a problem. I had 1TB HDD and fast startup was working for me, but when I move my system to a 120GB SSD, I cannot enable it. I'v got Win 10 PRO x64 and laptop MSI GE72-2qf
View 6 RepliesSo I just upgraded my wife's computer and noticed it loads directly to my account which has no password. When I restart it never asks who's account I want to logon to, just goes to mine. Of the three computer I've upgraded this is the first to do this. Also in the power options I can't find the option for fast boot.
View 1 Replieshow to make windows as fast as possible :-)
View 7 RepliesIssues regarding hibernation on laptop? Since upgrading to Windows 10 I've noticed that my laptop seems to be going into hibernation much more quickly than it did in Windows 7. I checked my settings and my screen saver settings and so on are setup to those recommended by HP but these do not seem to be having an impact on hibernation. What's particularly frustrating is that even when it's plugged in if you have a long download/install/update you must keep the machine active by moving the mouse or be active on the keyboard or it will go into hibernation mode very quickly (under 5 minutes).
View 4 RepliesLaptop is Lenovo X220 that had Windows 7 Pro and upgraded to W10. It has had already 5 vanilla installs of 10 Pro 1511 on it.
2x install with an old 3.5" 5400 RPM stock HDD drive and the 4-5th and final install with an upgrade to an SSD. The HDD was changed to SSD because of me thinking the HDD was dead and was causing the computer to lock up at boot.
Tried 3 different operating systems on the machine as well, Windows 7 (no problems) (stock with computer), Windows 8.1 (with Fast Boot) enabled and no problems on Windows 8.1 O/S and finally W10 PRO 1511, vanilla from Microsoft directly.
For some reason after W10 installs, does its updates, reboots, drivers are updated and everything seems fine after a couple of reboots and such. Works normally, wakes up from sleep. Only 3 programs get added. Firefox, Chrome and WinRar.
After that shutdowns OK, but when she boots up it gets past the welcome screen and hangs on the desktop. Complete hang everything becomes unresponsive, but the mouse pointer. I can dance the pointer around but No keyboard input no GUI input, nothing. Only way to come out is with a POWER BUTTON DOWN. Was trying to solve this issue since December and never found any solution, thought it was drivers or internet, or hardware but nothing, no dice. Even if it didn't connect to the internet after install and a program or 2 were added via USB and I shut down it would hang upon next boot.
So I did reading and reading and researching and I came upon a thread that mentioned W10 hangs on welcome screen with Fast Boot on, I thought no this can't be it because I make it past the welcome screen. I hang on the desktop when I'm actually in Windows. I can manage to click Start button and the system will hang. Only way to get it to respond is to hold down the power and power it down. Temps seem OK, MEMTEST came back fine, replaced HDD with SSD, only other thing I could think out was drivers or hardware (mobo) failure or something else ....
Then I decided to clean install update drivers via Internet, reboot and then disable FAST BOOT via @Brink regedit hack, because for some weird reason, on this machine on every clean install, FAST BOOT IS NEVER SHOWED in the POWER menu. I could not understand this. I do not have this option at all like @Brink has in his diagram photo. The option is just not there!!! But the registry though the hiberbootenabled value is set to "1".
So two questions, why is it checked and greyed out (that I cannot uncheck it) and 2, the only way I was able to change the value was manually via @Brink registry edit.
OPTION 2 - using a bat file because option 1 was unavailable.
Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
Once I disabled FAST BOOT, the laptop has been fine since. No locking up anymore period!
SSD is 850EVO and W10 PRO is the only O/S on the machine, legit with digital entitlement upgraded from W7 PRO key on the Lenovo, because its an X220 thinkpad so 'business' series. No problems since.
#1 Fast Boot option to disable on startup is not avialable on the machine? Value is "1" in registry but cannot make changes to it via control panel as it simply is just not there. (This was the case with both HDD and new SSD). Windows 8.1 shows the option, not 10.
#2 Hangs on startup after welcome screen
#3 Only way to prevent is to run the .bat file from @Brink or manually edit value in regedit, save, exit, shutdown, go on with life.
AFAIK value in REGISTRY is set at '0' and machine works ....
Brink has this option on his machine via control panel but I do not on the laptop. Brinks:
My PC does not give me that option at all. Is if it doesn't even exist.
I deleted a couple of files that I later wanted to restore. After a couple of hours the recycle bin emptied everything in it. How do you reset the time it keeps files in the recycle bin so as to make them easy to restore?
View 1 RepliesI have the following problems With the fast start up enabled only
1. The screen never appears past the post bios screen.
2.Wifi won't connect. I have to manually disable the wireless adapter and then enable it.
If the fast start up is disabled then this won't occur.
Since installing Windows 10 my lap top battery drains very fast and sometimes goes from 30/40 % to shut down in minutes.
View 1 RepliesHaving problem with a computer that will not shut down completely after Windows 10 update? I have one and discovered that if I turn off the fast start option it will shut down all the way.
View 4 RepliesRecently I upgraded from Windows 8 to 10 with keeping all files in place... When I started.. I disabled facial recognition to login.. Now I cannot log in to my windows 10 because it is hanging..
View 1 RepliesThe issue I am currently having is enabling NumLock before the logon, I have modified the corresponding registry key (Find attached my screenshot below) and that works perfectly fine when restarting my PC, however I have fast-startup (Screenshot also below) enabled and if I shutdown my PC and then boot it up again, NumLock is disabled by default. I have made numerous searches and can't seem to find any information in regards to Fast-startup or any registry keys linked to it and I don't particularly want to disable Fast-startup. Just to clarify, NumLock is always enabled before logon when booting up my PC and Fast-startup is disabled, however with Fast-startup enabled, NumLock is only enabled when restarting my computer.
View 3 Replieswhen fast start up is activated, I cannot enter the BIOS by tapping a designated key .
If windows can be loaded, I may disable the fast start up, or simple click the Restart, then tap the designated key during next start up.
How do I enter the BIOS, when Windows cannot be loaded?
Is it possible to change users fast, without going via the login page?
View 1 Repliesmy internet speed is fast,i am unable to use it(i.e. in notebook I am unable to display interest also voice is not working).This service is not available in our region but as changing REGION and LANGUAGE option to United States(US), it worked. My friends are able to use it even in slow internet connection but I am unable to use it.
View -1 Replieswhy is my lumia 730 battery draining so fast after upgrading to windows preview updates
View 5 RepliesI've been in the Windows Insider program since it started, getting every new build, and I usually hibernate my PC to keep all my apps open, only rebooting for updates that need it.
This has been fine on Windows 8, 8.1 and 10, up until the November update. I downloaded the initial, "faulty" November ISO with the media creation tool, but didn't get round to installing it until after it'd been pulled and reinstated. So I used NTLite to integrate that update in to the ISO I already had and did a clean install of that.
Everything was great until the next morning when I turned it on again. It booted as normal until it got to the Windows boot screen, which flashed on screen for 1 second or so before the PC just instantly powered down, like someone had pulled the plug out.
I troubleshooted this for ages and eventually worked out it's hibernation and fast boot - the only way to make the PC boot properly again is to go in to the BIOS and change the amount of memory given to the integrated GPU so you're effectively changing the hardware of the machine, which makes Windows dump the hibernate images and boot from scratch.
Just upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?
View 3 RepliesI recently upgraded my SENS 900X Samsung laptop from Windows 7 Home Premium to Windows 10. I did the easy upgrade, not a clean install. I did reformat my computer while it was in Windows 7, updated it, then upgraded to Windows 10.
When I turn on or restart my computer, I get a message which says:
I found : Link: Fast Startup - Turn On or Off in Windows 10
However, after performing step 3, I get this message: "Your power plan information isn't available. Access is denied."
I've been reading that having fast startup on in windows 8/10 can cause issues with dual booting systems with other operating systems installed like windows 7. I have windows 7 on one ssd and going to have windows 10 on a second. Will i have to disable fast startup in windows 10 or any other type of hibernation settings.
View 1 RepliesI just got a new 8tb external drive and this started happening. 2.5 gb file mkv..It'll have a burst of write speed completing 60-80% and then slow all the way to 0 and just trickle the rest, even though it fluctuates from as low as 5 up to 30-50mb until it's done.
View 2 Replies