After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 RepliesTrying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?
View 1 RepliesI triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 RepliesI have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
I'm been having issues a long time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.
Latest error which occuring at least once per day:
The driver DriverWudfRd failed to load for the device SWDWPDBUSENUM{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.
Whenever I try to install a new version of some software I get the following message: "movefile failed code 183".
View 6 RepliesTrying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
View 1 RepliesI had a pretty much faultless Win 10 setup with all the latest patches installed then this morning I connected an external USB hard drive which I had used several times before but this time Windows said it needed to install a new driver. I let the driver install and then Windows stated it needed a restart to complete the installation.
When restarting I received the "Inaccessible_Boot_Device error message - Windows will restart for you" message. On restarting again I got: "Your PC couldn't start properly. Error code 0xc0000001." Windows tried to automatically repair itself displaying the Diagnosing message first and then Attempting Repair message, and finally reporting it could not fix the problem. I'm not sure if the new driver being installed created the problem or whether it was just a coincidence and something else has caused the fault.
I was able to boot to Recovery using a USB stick created with Microsoft's MediaCreationTool. Safe boot and all the other startup options didn't do anything apart from resulting in yet another failed boot. Getting to the command line, I was able to view the file that Windows creates when it tries to repair itself: c:windowssystem32logfilessrtsrttail.txt. That file shows that all tests were completed successfully until:
"Root cause found. A patch is preventing the system from starting
Repair action system files integrity check and repair
Result failed error code 0x490"
I tried: sfc /scannow and got:
"Verification 100% complete, Windows resource protection could not perform the requested operation"
I then tried sfc /verifyonly and got:
"Windows resource protection found integrity violations. Details are included in the cbs.log. Note that logging is currently not supported in offline servicing scenarios."
As the message suggested, no cbs.log files were created.
I have tried:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
which all complete successfully but doesn't work.
Also tried chkdsk which didn't find any errors and:
bootsect /nt60 ALL
which again seems to complete successfully but doesn't work.
I just got a second hand laptop - Acer V3-771G with an Elan touchpad and I put a new SSHD hard drive in it and installed Windows 10 fresh.
I see lots of issues with ELAN touchpads but it seems as though Microsoft has produce one that installs and fixes most scrolling issues.
However, I have a strange one. When I enable vertical scrolling in the driver, it works as long as the mouse is active - and for up to 5 seconds after. But when I stop using the touchpad and go to scroll again after 5 seconds, it doesn't work anymore! It's like it disables it after inactivity - but only 5 seconds?
I've uninstalled and reinstalled drivers, tried various versions - but of course Acer doesn't support Windows 10 on this older model laptop (circa 2012) so there are no specific drivers for it on their site. Everything works except for this scrolling after 5 seconds - which I can recreate every single time.
I get the error "Code 80200013" when I try to upgrade my windows 8.1 to windows 10 from my reserved upgrade through Windows Update.
Additionally when I try to create a usb installation media through the tool (this one here [URL] ....) I get the message "something happened".
Trying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 RepliesI'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 RepliesAfter updated Windows 10 (PC) from build 10166 to build 10240. Then I can not download app in Windows Store. An error code is 0x803F7000 and '"try again latter".
View 1 RepliesI can't install or update any apps. Code error 0x803f7000 in all apps
Windows 10 came preinstalled on my Surface pro 4, i5, 8GB version...
So far i checked my clock, date and timezone - Correct
Location, region and language settings are all set to English (US) - Correct
I tried doing the store reset thing by launching command prompt (admin) and putting in wsreset - Didn't work.
I have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?
View 24 RepliesI just upgraded to Windows 10 on a brand new Lenovo Z50 laptop. It crashes whenever it is not plugged in with the error message THREAD_STUCK_IN_DEVICE_DRIVER ....
I assume there is some driver that I'm forgetting to download that is related to the battery or something?
Every time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 RepliesBasically I just got windows 10 and i noticed a windows update i tried it 3 times before restarting my computer and the update kept giving me this ...
Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063) - Error 0x80070643
Im using an activated version of Windows 10 but updates fail saying "There were problems installing some updates, but we'll try again later."
So far I have tried:-
Using microsofts fixit app, it said it fixed errors but the update still wont work.
Editing the registry - UX from 1 to 0
those are the main fixes I have tried plus some more basic ones.
The update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
i have a acer aspire 1v , windows ten just updated with cortana in australia , since the update my touch pad has no options for two finger functions
when i was running windows 8.1 i had options for three finger functions , that went when i installed windows ten for the first time and i could only get two finger options available , now with the latest install there is only options for one finger functions
I am have synaptics pointing device but i though i had elan pointing device...
what is also weird is when i open the synaptics pointing device in the tray manager , i have an option for accessories with pressure graph and moonpad options , not sure what they are but clicked on them and i get a message this option requires a synaptics pointing device and synaptics pointing device driver
I've tried device manager check driver update and it says working properly and driver is using the latest update.
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 RepliesI keep getting these two error
i) Driver IRQL NOT_LESS_OR_EQUAL error
ii) Driver_Power_State_Error
It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do.
I have an ASUS e56u laptop that I updated from Windows 7 to 10. Since the update the -Intel(R) Centrino(R) Wifi N-6150- driver is not starting up. It is the newest version (ver15.12.0.9).
View 2 Replies