Almost everything time I try to access my htpc that has shares I get this error. I just keep clicking the folder and it will finally let me in. The PC is up and running so not sure why this does this almost everything I try to access the share.
My PC is windows 10 pro the HTPC is win7 ultimate.
Everything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
I have a Windows 7 ultimate pc and I 2 tb hdd I'm trying to share with the network. I have it share by right clicking it and going to properties, sharing, advanced sharing and sharing it that way.
I also set the permissions to everyone with full access and owner to everyone full access. But when I go to my windows 10 pc I can see it so I click on it and go to it but when I try and paste files into it I get an error saying you need permission.
Why I would get this when everyone should have access.
Three machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
I have 2 laptop with windows 10 pro 64bits on my network how can I make it can send any files to each other ?
View 1 RepliesUsing Windows 10 I have tried several times, but I'm unable to recover my network or shared drives passwords. How can I delete the need for the password, or how can I recover or reset the password?
View 1 RepliesI have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
Error code 0x80070035
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD
>C:
>PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
Windows 10 Pro.
Administrator.
When trying to access the WindowsTemp folder, I receive the prompt informing me that, "You don't currently have permission to access this folder."
I click the continue button and receive the error message, "You have been denied permission to access this folder. To gain access to this folder you will need to use the security tab."
I do just that.
Properties --> Security --> Advanced --> Continue
Creator Owner, Administrators and System all have Full Control. Users has 'special.' So I adjust Users to have Full control.
I receive the error: "An error occurred while applying security information to: C:WindowsTemp. Failure to enumerate objects in the container. Access is denied."
I click continue and get this error, "Unable to save permission changes on Temp. Access is denied."
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
When selecting a file in Windows Explorer and clicking the 'Share' Button, no application/action is ever available on the right pane. Any success with this function ?
View 2 RepliesI have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 RepliesAfter the latest Widows pro 10 update I am unable to access my home network drives. Both the Synology and Buffalo drives were accessible but now are not viewable from the desktop.
View 3 RepliesSo I have my computer connected to my laptop via Ethernet cable this is how I get Internet access to my pc usually it shows my network name and that I am connected to the Internet. just this morning I upgraded my pc from 8.1 to 10 and ever since my network says unidentified and limited access I updated and installed all the drivers for my motherboard including lan I also tried manually putting tcp/ip and it still did not solve my problem so I switched it back to automatic but no luck .
View 1 RepliesI have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 RepliesI have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
yesterday my Ethernet connection stopped working suddenly was using and any moment stopped working I have tried many things and I can not make it work, this is the model of the adapter (Intel (R) Ethernet Connection I218-LM) and this is the error in the diagnosis of Intel.
connection Status: Failed.This test Relies on a response from a gateway, DNS, DHCP, or WINS server and no such response was received. any such server connection for this May be unavailable or misconfigured.This adapter is configured to Obtain an IP address automatically but no DHCP server is present on the network.Windows selected an IP address using Alternate Private IP Addressing.
I have the following problem. I upgraded to Windows 10 and now I can't access the disk of my other computer.
- Both PCs have the disks access open for everyone (home network).
- Both have the same password.
When I try to enter the C: drive of my other PC, I get an error that I don't have the privilages to do so.(I see them on the network, but I can't access them).
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
Every so often Windows 10 will give a notification about Limited Network Access on a wired Ethernet connection. The notification is not true as I am able to use non-Microsoft applications such as Firefox just fine with the Internet. However Microsoft applications such as Outlook, Windows Updates, Edge and IE do not detect an Internet connection and are unusable. I found that if I turn off real-time protection in Windows Defender and then reboot the computer it clears the error for a time but it always comes back within a day or two.
View 2 Replies