Errors When Using SFC Or DISM
Sep 8, 2015
If I run SFC it tells me I have corrupt files that it can not fix. When I tried to use DISM checking health says the files can be repaired yet if I run DISM with /online feature with out a source it says the same thing if I run it with a source which is it can not find the files needed. I have attached the CBS log and DISM log below in
View 4 Replies
Similar Messages:
Feb 10, 2016
Experienced plenty of issues with win 10 installations after upgrades from say WIN 7. The issues are just about all related to the disappearance of MS Edge and the Start Menu.
One should run the SFC /scannow command , followed by the more complicated DISM command and then finally the very complicated powershell command.
Almost no replies are made after one runs the SFC command and even the DISM command and no errors are found.
What should one conclude if the SFC command and the DSIM command report no errors? Secondly what is the best next step in trying to recover from the issue at hand?
View 6 Replies
Mar 3, 2016
I have an issue with my sfc and dism, as stated above. The issue started when i went to add windows features i get nothing but a blank box. Thinking there was some kind of corrupted file I ran a sfc scan only to get this, Beginning system scan. This process will take some time.
View 1 Replies
Nov 15, 2015
I have a very old laptop, but despite the age it has worked relatively fine for my needs with just an HDD change. I bought this at the very end of Vista lifespan with an almost immediate Win7 upgrade offered. I then skipped Win 8 totally, but rolled a Win 10 when it came, and it has been working well. But you get the picture. This machine is old.
Onto the point: I'm getting an occasional fan rev up, with the CPU at 100%. The process is Service Host: Local System (Network Restricted). Recently, I also lost all sound on the computer, which chkdsk /f /r was able to salvage. I have a feeling these might relate to a same problem.
I researched, and found out that sfc /scannow will work. OK. It starts the verification process, but fails at 18% saying corrupt files exist. When I export the sfcdetails.txt from the log, it does not really report which files are corrupt so as to replace them. 00000e22 [SR] Beginning Verify and Repair transaction and then the logfile ends.
Because I cannot complete SFC, I'm told to run DISM, and that is how I ended up here. When I run Dism /Online /Cleanup-Image /RestoreHealth
Image version 10.0.10240.16384
At 20% an error 1726 with remote procedure call failed.
So I go to dowload the ISO and mount it. It will then give me the .esd
So I'm having my fingers crossed while running Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:SourcesInstall.esd:1 /limitaccess
View 1 Replies
Sep 11, 2015
I have a Lenovo W530 laptop, that started with Windows 7 Pro, then got upgraded to Windows 8, then 8.1, and now 10 Pro.
I have the factory setup disks for only 7 and 8.
I ran DISM and it says the source files could not be found. From a similar problem several months ago, I sort of know how to work with DISM, but if it is looking for Windows 10 files, where would I point DISM ?
My next step is to use the log files, and attempt to find which files are corrupted.
View 9 Replies
Dec 8, 2015
I ran sfc/scannow (trying to diagnose a sleep problem) and it found irreparable files, and I ran it again in safe mode, and again, irreparable.
I ran dism and it couldn't access the source files. (Afterwards, I checked windows update, and it says that the computer is up to date, and the last check was at the time I ran dism!)
Is this behavior normal for windows 10 pro x64?
View 9 Replies
Aug 10, 2015
After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
View 3 Replies
Aug 3, 2015
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
View 2 Replies
Oct 1, 2015
I have managed to create a USB pen drive to apply WIM images using the DISM Apply-image command in 64bit so I know it can be done but how to create a pen to apply 32bit WIM images
View 6 Replies
Nov 9, 2015
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
View 5 Replies
Dec 24, 2015
I've been trying to use DISM /Online /Cleanup-Image /Restorehealth on my Windows 10 Home, but it keeps telling me that it does not support servicing Windows PE with the /Online option. Of course I'm not running WinPE 10.
View 9 Replies
Mar 5, 2016
a few days ago my windows 10 crashed so I had to format and reinstall windows 7 then upgrade to windows 10, a hard work to do. So I started to search about how to capture the image of C: where the windows 10 is running and I found Dism. Now I have a lot of questions about it, let me start with the capture of C: as an image.wim.
1- Does dism Capture-Image works for windows 10?
I used the following comand to capture a image:
Code:
dism.exe /Capture-Image /ImageFile:D:Image_of_Windows_10.wim /CaptureDir:C: /Name:Windows_10 /compress fast
It generated a .WIM file with 16 Gb.
2- Is FAST option better than MAXIMUM? Or should I use NONE instead?
3- Now with the image of the c: stored in hard drive, if my windows 10 crashes, is this how I should recover it? applying the image file .WIM or should I format the partition first?
Code:
dism /Apply-Image /ImageFile:D:Image_of_Windows_10.wim /Index:1 /ApplyDir:C:
4- After using DISM to apply will windows 10 boot and work like a charm?
5- Do I have to configure the boot with BCDBOOT?
Code:
C:WindowsSystem32bcdboot C:Windows
View 2 Replies
Aug 15, 2015
I had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
cbslog.txt 3.79MB
dismlog.txt 447.82KB
SFCFix.txt 926bytes
View 8 Replies
Nov 24, 2015
Using the Dism command in Windows ADK for Windows 10 v1511, it is possible to change the name and description of a volume image saved to a wim file?
If not, you can tell me the method more proper to do this avoiding the use of the old imageX command?
View 1 Replies
Dec 10, 2015
W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.
Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight).
I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped)....
View 3 Replies
Aug 12, 2015
I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them.
Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:SourcesInstall.esd:1 /limitaccess both came up with the error 0x800F081F.
Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.
View 3 Replies
Aug 26, 2015
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
View 2 Replies
Aug 2, 2015
I have been trying to fix my windows 10 corrupted files but I have been unabled to recover it. I tried every possible way of recovering using DISM commands, but to no avail. I tried also the sfc /scannow but as usual this command hardly ever fixes issues regarding corrupted files. I have tried using dism in several ways by specifying the location and the install.esd file from my usb flashdrive windows copy and even tried the health commands on powershell..still wont work. The first command I tried and for all of them I get the same error message, which looks like this:
C:WINDOWSsystem32>DISM.exe /Online /Cleanup-image /Restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see [URL] .....
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
I have heard people saying that I need to refresh my pc as a last solution and I don't want that since I have all my settings and programs migrated from the upgrade...
I have been reading on the web that there is a way of specifying the packages missing via command and then download them manually..
[URL]
View 6 Replies
Mar 27, 2016
DISM command line utility won't work. I get an error 87. AND how do I change my user name?
View 1 Replies
Aug 29, 2015
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
View 14 Replies
Feb 3, 2016
I just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
View 9 Replies
Oct 15, 2015
I have a laptop that I took the HDD out of and connected it to another Windows 10 machine.
I ran the command
Dism /Image:e: /Cleanup-Image /RestoreHealth
But get the error
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Error: 87
The cleanup-image option is unknown.
For more information, refer to by running DISM.exe /?.
The DISM log file can be found at C:WindowsLogsDISMdism.log
View 1 Replies
Nov 14, 2015
After I installed TH2 on Thursday I decided to run a SFC check to see if I had errors and it came up with some that it said it couldn't correct. The assembly look at the attached file and tell me what I need to do.
Attached Files : CBS.zip 161.41KB
View 12 Replies
Nov 16, 2015
I downloaded and installed windows 10 home premium version on my desktop. The blue screen have been annoying me time by time when I'm using OS properly. There are several errors shows up every often, such as bad pool xxxx, page management, no area paged found. I tried reinstalled OS but the problems still exist. How to solve those errors. Someone said its caused by the drive software which I don't know how to pick it up from so many drive tools in my system. By the way, is there anyway to solve problems directly except downloading new OS version again?Currently running home premium 10240
View 1 Replies
Nov 16, 2015
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 Replies
Jan 19, 2016
I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram.
Windows 10 is a fresh purchase and install downloaded direct from MS.
The Nuc worked fine with both the HD and Ram being recognised and W10 installed fine. I loaded the drivers from the Nuc support page and then updated Windows. Everything still fine. Then I proceeded to install other programs and went to bed.
Next morning the PC had crashed and failed to restart. After searching the net for possible cause I decided to reinstall Windows 10. This time i didn't load any drivers and the PC was NOT able to connect to the Internet because I thought one of the updates may have cased the crash.
PC was still unstable and crashed often to the point it was in a BSOD loop. I then reinstalled Windows 10 again and this time I installed the LAN driver only and Windows 10 updated itself. It stayed on for 12 hours and has now gone into a BSOD loop again.
The BSOD error message changes but the main ones seem to be
Memory_Management
irql_not_less_or_equal
0xc000021a
Throughout this process I have:
Run Memtest86 for approx 20hrs with no errors
Performed a disk check
Installed samsung magician to confirm HD firmware is the current version
Updated the BIOS to current version
View 9 Replies