Ethernet Doesn't Have A Valid IP Configuration After Updating
Aug 6, 2015
I updated to Windows 10 yesterday and after a few quirks I got it to running as normal, or so I thought. I use an Ethernet cable to connect to the Internet but all I get when I diagnose is "Ethernet doesn't have a valid IP configuration". It used to work fine before updating by the way. This is what I've tried
Restarted the computer
Turned off the computer, waited a few hours, then turned it on again
Unchecked IPv6
Re-installed the LAN driver
Tried a different ethernet cable
Tried to follow the tutorial on this website for Windows 8 for this issue but when I type ipconfig /release, it tells me that "an error occurred: an address has not yet been associated with the network endpoint"
Another thing I've noticed, when I enable the Ethernet connection, my computer skyrockets to exceedingly high temperatures (over 99C according to the monitor I have). When I disable it or disconnect it it goes back down to normal. Not sure why this is happening.
EDIT: Looks like the temperature only rises when I check IPv6
View 1 Replies
Similar Messages:
Aug 24, 2015
So... I just updated from win 7 to win 10, as I got it for free. All went smoothly, but there was no ethernet connection. I'm running a custom built pc, connected to my router via ethernet cable.
At first windows detected the cable, but said: ''Ethernet doesn't have a valid IP configuration." I was on about around the settings, and deleted the ethernet network from windows' settings. I thought it would come back by just re-plugging the cable. This didn't happen. What happened was, that the whole 'Ethernet' tab disappeared from the 'Network & internet' menu!
I also don't have 'Wi-fi' or 'Airplane mode' tabs in the menu... Well I have a pc that doesn't have support for wifi so that might be why...
how to get win 10 to detect the ethernet cable, and maybe that way bring back the 'ethernet' tab?
Oh, and I tested the ethernet cable on my laptop (running win 7), and it worked fine.
View 6 Replies
Oct 8, 2015
Very frustrated!! I had internet connectivity prior to windows 10 upgrade. The above message is what I am receiving. Network Center states: Unidentified network. I have done the following: Taken modem/surfboard, router and pc down gracefully then brought back onlineUsed windows troubleshooterread thru (and walked thru) dozens of forums with solutions to other "similar" issues**I have tried to connect directly from pc to modem. I get the same results. I have zero connectivity from my pc so I plan on using a thumbdrive if I need to reload drivers. I'm about to revert back to 8.1 and call it quits..
View 1 Replies
Feb 10, 2016
Where to start so to begin with my issues started when we got a new router. We had issues with the old one so we installed a new router and got it working fine WiFi worked alright but Ethernet would not connect it my computer when I ran the troubleshooter said one or more network Protocols were missing from my computer I'm running windows 10 version 1511. I went on google on my laptop to start finding a fix and I must have tried every option in the book just about I am losing my mind over how to fix this. Finally I tried reinstalling the Network drive Uninstalling my current one going on google finding my most updated one ect. and now the issue is no longer about the protocols but its saying my Ethernet doesn't have a valid IP configuration
View 2 Replies
Aug 5, 2015
After I installed Windows 10 on my computer I cannot connect to internet through the ethernet port. I've tried everything. I get the message that "Ethernet Doesn't Have A Valid IP-configuration". I tried to reinstall the network driver, ipconfig /release and ipconfig /renew as admin but it cannot find the "Default Gateway" and when I type ipconfig /renew it cannot connect to the DHCP server.
View 1 Replies
Oct 22, 2015
8 hours ago my computer was connected via Ethernet and functioning fine during online gaming.
This morning approx. 4 hours ago I awoke to notice the computer updated and restarted during my sleep. Now the network icon has an exclamation mark and displays "Ethernet doesn't have a valid IP configuration."
WiFi functions fine. Other devices connect to WiFi fine. PS3 is wired to a different port on the router and functions fine, so attempted to change ports the laptop connects to, with no success. Bypassed the router completely and went just Ethernet straight, still will not connect via wired connection.
I have powered off the laptop, router/modem with no success in rectifying the issue.
Here is ipconfig all ---
Code:
Microsoft Windows [Version 10.0.10240](c) 2015 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>ipconfig allError: unrecognized or incomplete command line.
USAGE: ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
[Code] ....
I have checked network adapters and ensured drivers are up to date. Which they are.
View 7 Replies
Aug 4, 2015
I'm facing an weird problem in Windows 10. I've upgraded to Windows 10 from Windows 8.1. If I restart my PC then it shows my network connectivity is limited for both wired and wireless. After troubleshooting it says 'Ethernet does not have a valid IP configuration'.But if I shut down my PC and then start it again then there is not any issue in network.I was using a legit copy of Windows 8.1.
View 1 Replies
Jan 18, 2016
I am running Windows 10 demo version. I have problems connecting to the net. I am shown the error along the lines of "Ethernet does not have a valid IP configuration".
From command prompt I run "ipconfig/all" and here is the console's output:
When I run "ipconfig/renew" it fell through : I should add, I have no problems on Windows Vista however.
View 4 Replies
Sep 17, 2015
I've been having the above issue at different times and it is getting a bit irritating to restart the modem(router).How can I permanently fix it so that my internet can be online 24/7 without me having resetting the box?And how come it says that I have no IPv4 connection but IPv6 does have a connection?
View 9 Replies
Sep 5, 2015
My internet was working fine for quite a while after upgrading to win10, but one day both the wifi and ethernet stopped working. They both show a limited connection, or sometimes even fail to identify the network. The error message in the troubleshooter for both ethernet and wifi is 'doesn't have a valid ip configuration'. I have tried rebooting and resetting the router, re-installing network drivers, and restarting everything involved.
The wifi card is called "TP-LINK Wireless PCI Express Adapter" and the ethernet adapter is "Realtek PCIe GBE Family Controller" and is connected by a Cat5e ethernet cable.
View 3 Replies
Nov 27, 2015
I ran Windows 8.1 on my desktop machine a few months ago, and later upgraded to Windows 10. Everything worked great at that time, but since have replaced Windows with Linux. Now I'm trying to install Windows again, with the same 8.1 disk that I used for my earlier installation, and my ethernet connection isn't found. (this is a direct wired ethernet, not wireless) I've installed with a local user account, dug into every networking utility in Windows, but whatever I do the internet goes undetected. I've run the ethernet thru different routers, and even circumvented the router all-together, but no luck. Has my 8.1 disk "expired"?
View 3 Replies
Dec 11, 2015
What is wrong with Task Scheduler on Windows 10?
Here is where I add my task:
View 2 Replies
Jan 30, 2016
I have 2 files - supposedly the same version but not the same size.
1 has Verisign certificate and the UAC says it is a know vendor
2 has Symantec certificate and the UAC says it is an unknow vendor.
I checked the certificate in file explorer and the Symantec certificate is 1 day newer than the Verisign
That alone seems odd that a company would have 2 certificate licenses 1 day apart for the same software.
Does W10 UAC chk the certs? If so, then is it saying the Symantec cert isn't valid?
View 4 Replies
Feb 10, 2016
Since the last win 10 update, my desktop Folder icons do not work right. When I left click I get this
when I right click I get this
The only way I can open a folder (such as Downloads) is to right click, then select open.
I have tried creating new shortcuts and they do not work. Regular program shortcuts work fine. If I create a new short cut to a file, (ie a photo), I have to right click and select OPEN to view the file, then when I create a shortcut, it does not work unless I right click and select open.
I restored system to earlier date and all is well. When restarting computer I get force fed update. Selecting NEW from context menu was not there. I fixed that. Why come I get cmd when I try to open a folder?
View 5 Replies
Jan 8, 2016
I have a problem in the installation of Windows 10. I have a CD installer of windows 10 pro 64 bit and I want to replace my Windows 8 OS thats why I perform a clean install. But whenever I try to install the OS. I have this error:
"Windows cannot find the Microsoft Software License Terms. Make sure the installation sources are valid and restart the installation."
View 1 Replies
Sep 28, 2015
Upgraded to Windows 10.
Everything was fine for about a month until I had a disk crash. After several days I got that fixed and did a clean install of Windows 10.
Now I am trying to reinstall Outlook 2010 from the original DVD. Valid product key (setup validates it).
Setup runs, then encounters an error (doesn't tell me what), and backs off all files.
As far as I can tell, Windows 10 is saying the SETUP file is incompatible, not Outlook 2010 which Microsoft states is still compatible with Windows 10.
View 9 Replies
Feb 10, 2016
Blue Stacks app player doesn't start. The following report
In English > the specified argument is outside the range of valid values. Parametername: minimum size
What does is mean and how can this solved?
View 2 Replies
Jan 19, 2016
I am trying to upgrade to windows 10 and get the following error
Multiprocessor_Configuration_NotSupported
Having tried a few times the other error I get is C1900101-20017 ...
View 1 Replies
Jul 18, 2015
On the bottom of windows 7 there is a icon to upgrade to windows 10. However, is there/will there be a way to upgrade to windows 10 and keep windows 7 in a dual boot configuration.
View 1 Replies
Aug 9, 2015
Just installed fresh Windows 10. Did so using a single partition.
When things start going slow, would like to revert to this version. Obviously My Documents and other sections will be different.
I would like to be able to go back to this basic configuration, but not have to reinstall everything.
View 4 Replies
Nov 6, 2015
Is there a configuration setting for this "store" app. I see people post shots of downloads available for certain apps thru the store. I might have set mine to automatic, and want to change it.
View 1 Replies
Aug 8, 2015
I have upgraded from Win8.1... It seems all is workin +10, but just a few days ago I see this thing. I set the screensaver to 10 minutes delay, I choosse the 3D animation and bingo . nice like in y old Win 8.1. The problem is simple. When I shutoff my pc and start again the screensaver settings change again to 1 minute( default) and no 3D sacreensavere any more !! I must set again to X minutes, select the animation , apply and save and this over and over . Never problems before with my Win 8.1. I use the same hardware and apps. Everything is the same on my PC than before.
View 10 Replies
Aug 11, 2015
There appears to be no way of configuring a taskbar clock on my Windows 10 desktop - I have tried every visible menu option.. The taskbar properties menu provides no option for a clock although I have seen Windows 10 displays that show a clock (and calendar).
Note: My original Windows 7 system, before the upgrade, had the taskbar clock disabled as I already had a clock gadget on display - could this be the reason?
View 6 Replies
Feb 17, 2016
As the title states I have an SSD and HDD setup, now I have set the Windows Documents, Pictures and Music folders ect and the app data on the HDD as you would.
And some programs are on the SSD and others on the HHD.
Will upgrading to windows 10 mess with this or will it just upgrade without putting random bits of it on my HDD.
View 1 Replies
Aug 8, 2015
My Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've tried to change it but it continues to be the same "selective Startup". This makes me uncomfortable cause possible future problems.
View 8 Replies
Nov 5, 2015
Just getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.
View 8 Replies
