My acer notebook after upgrade from win8.1 to win10, my ethernet port keep disconnected and sometimes cant detect cable till i restart ny notebook. reinstall driver still same..
View 1 Repliesi just built my pc and installed a fresh windows 10, i tried to connect ethernet cable to my pc but win 10 still cant detect the cable.
View 1 RepliesI have a problem with my internet connection. First, I've tried a PCI Wi-Fi card and a repeater and nothing change.
My computer have a problem with the internet connection. When I play games like Counter-Strike, I'm spiking and I have some rollback every 5s. Here's a picture of my internet connection in the task manager:
As you can see, I'm spiking alot. Sometimes, my PC disconnect from the router (even when it's wired).
What I tried:
- Recovery
- Flush DNS
- Renew IP
- Uninstall/Install network drivers and adapter
- Uninstall/Install general drivers
And... nothing worked, except one thing: Fix network connection issues - Windows Support
Type netsh winsock reset and press Enter.
Type netsh int ip reset and press Enter.
Type ipconfig /release and press Enter.
Type ipconfig /renew and press Enter.
Type ipconfig /flushdns and press Enter.
It's working for like 30 minutes and then I'm spiking and lagging again. I suppose it's a DNS/IP problem. I need to do it again every time I want to play 30 minutes.
PS: When I'm browsing on chrome, I don't see the spike effects, only when I play or skype.
A couple days ago I noticed that instead of having the ethernet in my taskbar that it is connected to wifi. I dont understand that because I have been using hardwire forever. To top it off my xbox connects via ethernet, but my pc wont. have tried the same cable that connects my xbox. I am pretty sure this is causing serious game lag, and i dont know what to do at this point. i cant access my router settings either. i type 192.168.1.1 and it doesnt load. that is the same ip address that i have always used before.
So this solution did work in a sense. Once reinstalled my drivers, my computer did detect that there was a ethernet plugged in, but it said the there was no connection. I disabled wifi on the computer, so it can only connect to ethernet. even tho it says that there is not internet connection through ethernet, everything is working great. It permanently has the Caution symbol over my internet.
My problem is i use a hardline into my computer and upon starting it up yesterday was greeted with the problem “no ethernet cable installed or connected”. I have replaced the cable already/restarted both the computer and router multiple times/did a system restore and none of those worked. Also disabled and re enabled the adapter multiple times.
The only thing that seemed to work or hint at the problem was a windows 8 forum that said to use an elevated command prompt to do “sfc/scannow” and that came back with errors. There was a “DSIM” command that was unable to find a correct download location.
The other day I was connected to the internet via Ethernet cable I bought around 3 weeks ago and it was working well with no problems, but for the past two days when I plug in my ethernet cable, my laptop doesn't detect it and it says "Network cable unplugged".
View 1 RepliesWhere to start so to begin with my issues started when we got a new router. We had issues with the old one so we installed a new router and got it working fine WiFi worked alright but Ethernet would not connect it my computer when I ran the troubleshooter said one or more network Protocols were missing from my computer I'm running windows 10 version 1511. I went on google on my laptop to start finding a fix and I must have tried every option in the book just about I am losing my mind over how to fix this. Finally I tried reinstalling the Network drive Uninstalling my current one going on google finding my most updated one ect. and now the issue is no longer about the protocols but its saying my Ethernet doesn't have a valid IP configuration
View 2 Replies2 days ago, I was happily enjoying my internet when suddenly my internet stopped working, I checked it and it showed that the ethernet cable is unplugged. I have by now, tried reinstalling win 10 (lost all my files and drivers ) and few more things like automatically searching for updates online. I have a realtek family controller
View 1 RepliesWin 10 32 bit will only load properly with Ethernet cable. Discovered this looping issue when I moved the PC and went to use Wi-Fi. Plug cable back in and everything goes back to normal. Troubleshooter doesn't find anything wrong.
View 8 RepliesI have been unable to do a direct cable connect. Settings are not available. In settings, to do a cable connect it asks for a name and ISP. There isn't any. I never had a problem doing this before and I can do it with my apple computer. It has now been 2 days trying to figure out how to do what should be the easiest connection. No problem with any wireless----not everyone has wireless! Your microsoft stores have a long way to go to match the apple stores. If you can't get a connection to the internet it is very difficult to communicate or download any patches.
View 6 RepliesMy computer wont connect to the internet via ethernet cable. It works when the cable is directly connected to the modem, but when I run the cable into the wall output it wont connect. Ive tested that there actually is internet through the cable in the wall by connecting it to my Macbook, and it works perfectly. what can I do to fix this?
View 1 Replieswhen I disconnect from my work VPN, sometimes it hangs at "Disconnecting".
the only indication is when I try and reconnect nothing happens the "Connect" button just flashes.
the only way to reconnect is to reboot.
am I the only one getting this, and if not is there a solution to this behaviour??
I recently upgraded to Windows 10 and was happy with the new OS but lately I have been having issues with the Wi-Fi since it disconnects randomly several times during the day. It seems to "turn off" on its own and comes back up after a while. It's annoying and I didn't have this issue with OS 8.1. If possible, I'd like to solve the problem. I've thought about reverting back to 8.1 but I've misplaced the key and it's not in a sticker underneath either so I can't really do that now. The option that most people show by going to 'Recovery' doesn't work because it says the 'necessary files have been deleted' so I can't proceed that route anymore.
View 7 RepliesAfter upgrading my OS to windows 10, its making headache with wifi. My Thinkpad T410 gets disconnecting frequently from the wifi network and does not reconnect automatically. Also not getting reconnected manually for a few minutes. After that reconnects.
Old OS was Windows 7 64 bit.
Wireless adapter is Intel Centrino Ultimate N 6300 AGN
I have a Seagate 1TB USB 3.0 Expansion Drive (see signature for other hardware.) Ever since I upgraded to Windows 10, it has an annoying habit of disconnecting and then remounting. When it remounts, Windows Explorer pops up over whatever I'm doing, even full screen activities like gaming or video playback.
It worked fine under Windows 7, and seems to exhibit no problems whatsoever under Linux, to it doesn't appear to be a hardware problem. Maybe there's just a way to keep Windows Explorer from popping up when it remounts?
So recently I've been having this issue where my mouse keeps disconnecting and reconnecting for about a second randomly. It doesn't happen too often, but it's enough to be annoying. I'm currently using the Logitech g100s with the Logitech gaming software installed, but even without the software it still randomly disconnects. I have a feeling it might be the mouse cord because I've been using the mouse for about a year and a half and it could be wearing down, but I can't really test this assumption out because I don't have any other mouse to use. Plugging it into other USB ports doesn't resolve the issue either.
View 1 RepliesI recently Factory reset pc with windows 10 on which has deleted windows 10 and everything else it seems bios deleted too when I turn it on and it starts up it comes up with "An operating system wasn't found, try disconnecting any drivers that don't contain an operating system"
How do I sort this I built this pc myself I got two disks one graphics card driver and another for the other drivers I think like the on board graphics, wifi etc... don't have a windows disk to place in tray but can find someone who does... will it work if I just place the windows 7 disk in?
My laptop keeps disconnecting my wifi since i installed windows 10 the only way to get connected again is to reboot my router.
View 3 RepliesIf I decide to do a clean install of Windows 10, can I just disconnect my Data HDD from SATA/Power during the process? This would be really ideal since I only have docs/installers/music/videos/photos and could even backup my current steam library. I don't have an external drive to back up anything with, and I don't see why it'd be needed here.
I feel like the internal drive is acting similar to how an external drive acts anyway
I signed in to my Microsoft account when I logged onto my Windows 10 laptop, I should not have to sign in AGAIN. Or is this a new "feature" of Windows 10?
I was running an 8 hour job on my network late last night between the two laptops on my network. I just checked it and it had a little less than 2 hours to run. A few minutes later a Microsoft message popped up that said I needed to sign into my Microsoft account again. Immediately, my network went down and the long running job ended. I have to think these two are connected. What is really interesting is that I am still connected to the internet and I have to assume to my Microsoft account.
Why would I get that message? Why would it interrupt my network and crash my job? How do I prevent this from happening again?
The more I see of Windows 10 the better I like Windows 7, actually, the better I like windows 95. Remember that one?
Its a common issue, but a long time ago I have fixed this issue but i forgot how. I have already tried all the fixes I could find on the internet. I disabled "Allow the computer to turn off this device to save power" on every port, I also went to power settings and disabled use selective suspend setting on EVERY POWER PROFILE.
And i also updated the usb 3.0 extensible drivers and the intel series 8 intel chipset drivers. but everytime i plug my external HDD to my new laptop the first 3.0 port sometimes just keep connecting and disconnecting instantly, and on the second port it connects and stay connected but if i move a big file it will start flickering on and off ( small files i can move) and yes i know about the radiation that 3.0 devices output and i have moved the drive away from the laptop. last step is to disable wifi and try again.didnt work.
USB 2.0 ports work fine
I upgraded to windows 10 yesterday from windows 7. I noticed that my network isn't working. It says that cable is unplugged but my cable is fine. I tried different cables but s still the same problem . My internet worked fine yesterday( in my windows 7) . My drivers are up to date. My wifi works fine only internet isn't working. When I press troubleshot it says that cable is unplugged or your broadcom netxtreme gigbait adapter have problem with hardware or driver.
View 1 RepliesSo I've built my first ever PC and I chose the ASUS Z170-A as motherboard. When I was finished I installed Ubuntu. The ASUS motherboard do not have wifi compatibility integrated so I used the ethernet cable to connect to internet. That worked just fine, everything worked very smoothly. Then I decided to install Windows 10 instead. I bought the Windows 10 Pro, wiped out all the Ubuntu reserved partitions on the SSD disk, and install Windows.
But now, while having the ethernet cable inserted to the motherboard, it wont recognize it. The green and orange lights next to the ethernet cable input are even turned on (indicating that the PC does have a connection). But still the OS wont recognize that it is there. So even when Ubuntu succeeded to recognize the cable, Windows 10 din not. I speculated that I need some kind of software to detect the cable, but I am probably wrong.
Per the title, I run my computer through my TV using an HDMI cable. Sound works brilliantly on Windows 8.1 but after upgrading to Windows 10, I'm left without audio, and in the sound settings it doesn't show HDMI as an available device.
View 2 RepliesI'm sure there's enough variables that this could be some combo of software and stuff I have (I never use OneDrive - close it? I use Dashlane - it had Win10 issues, later resolved.) -- but does anyone walk away from their PC, come back and find online (cable modem/Ethernet in my case) - just stops working, in everything? Evernote, Firefox, Outlook, etc.?) Programs are fine (well, Outlook freezes in mid send/receive but...) but the online access is gone? And the only fix usually is a reboot?
Never happened in Win 8.1. Happens about once a day in Win10. Reboot fixes. Network troubleshooter finds nothing. If it didn't come back after reboot I'd be desperate, as it is ... I can live with it if I have to but... was hoping one of these "cumulative updates" would work but... doesn't seem to happen when I'm working, only if I stop a bit. Got a clue that doesn't involve powershell "fun" or registry/deep file mucking?
Windows 10 plays Mp3 Files just fine. Connect an HDMI cable to the video output port, and then windows 10 suddenly wont play those files. An error message pops us inside windows media player and Grove that this file type is not supported. Also no sound is played through the HDMI Cable to my TV, and no sound is played when i click the volume bar on the bottom right side.
I work for an integration company. We just installed a couple of conference rooms for a company in which we have an HDMI cable running from the table through the floor in the walls and to the TV. From there it breaks out into the Amplifier and plays audio in the room. Normally i bring my Mac book pro for testing but i purchased this Windows 10 computer as a test device. I did not have a second laptop with me to test this out.
However, With the computer and the HDMI cable i am getting video to the TV. When i enter my TV menu and arrow around the menu option my sound works on the built in speakers in the room. So i can confirm that the cabling is all correct. This is the identical setup that we always use. I have also plugged my Iphone into the cabling behind the TV and played music which worked perfectly fine.
The computer, as i mentioned, would play MP3 files perfectly fine, untill i plugged in the HDMI cable. Infact i can be playing and MP3 file and then plug in the hdmi cable and suddenly the computer stops playing the MP3 file and gives me the error that windows can not support this file type. Those same MP3's play on an SDCard in the TV when i access them directly from the tv. So those files are not bad. Also anything with audio fails to play anywhere (tv or locally on the laptop) when the HDMI is plugged in.
Also i have gone to the control panel and selected the Audio section and looked at the video card / audio output selections. When i have no HDMI cable selected the option for audio output changes to the internal sound card. (which is correct) and then i plug in the HDMI Cable and the audio switches to the HDMI output (which is correct)
the only two conclusions i can come up with are this particular computer has a bad video card. or windows 10 is not supporting audio output. I have never tested our setups with windows 10 before.
Last bit i'll include this is a brand new computer. Core i5 8Gb ram 1tb hard drive. its a toshiba.