I have an external hard drive connected to my W10 PC. Sometimes when I boot (not all the time) I get an error message that the recycle bin is corrupted because the drive is showing as one of the drives that utilizes the recycle bin. It then asks me if I want to empty the recycle bin, which I do. I then go in and change the recycle bin properties to NOT include that drive path.
View 1 Replies
I have two drives. One is an SDD, which is where my windows installation is. The other is an HDD, which is where I keep a lot of large files. Whenever I delete something on my HDD, Windows copies it onto my SSD before deleting it (by moving it to the recycle bin). I do not want this to happen. I want it to either move the recycle bin to my HDD or don't copy it into a recycle bin at all. How can I do this?
View 1 RepliesI was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
I have a few Windows 10 systems with clean installs (not upgraded) whose C: drives are filling up with random hex named folders; over 50K of them. From what I have read, this could be related to temporary update folders, but they are not being deleted. The folders are named something like "00b332a3dcbf71fb88" and contain 0K of data, but they are extremely annoying.
What these folders could be and if there is a way to either stop these folders from appearing or at minimum, to redirect them to another location not on the root of the C: drive? If these are related to Windows updates, I will not be able to shut those off as these systems are all part of a group policy that keeps them on. I can shut down that policy, but prefer not to have to do that.
See Pictures, 'Local Disk E' appears twice at the side, not an issue, but I don't know why?
View 9 RepliesPen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesI just did a complete upgrade of my PC replacing motherboard, video card, processor and power supply but keeping original hard drives. I did a fresh install of Windows 7 and then upgraded to Windows 10 soon after completely smoothly with no issues. My boot drive and external survived, but for some reason, even though it was handled with great care, my other SATA hard drive doesn't appear anywhere anymore. I can hear it spin when I boot the PC but it doesn't appear in BIOS or in Disk Management. I changed the cable and the port it was plugged into but no dice.
If it is indeed dead...what are my options in recovering the files? It is essential I get these files back!
It kind of worked on and off when plugged into my brother's PC which uses a different make of motherboard...
Can I install Windows 10 using an external DVD Drive on a new PC build?
View 3 RepliesAll drive in explorer appear as "Local Drive".. I want to rename them "Drive_A", "SOFTWARE", "PHOTOS", etc. but can't.. Is there a way?
View 3 RepliesOk, I bought a 2tb Seagate external drive which I swapped in my ps4, and took the 500 gig drive out of the ps4 to use as my external drive for my laptop.
But, my problem is, is that when I put in the usb cord to connect my external hard drive to my laptop, it lights up, but it doesn't show up anywhere on my laptop. I've done the disc management, and nothing is showing up as well.
My laptop is an HP Pavilion g, came with windows 7 64bit, but did that upgrade for windows 10 64 bit. Why it wont show up on my laptop.
I have installed the latest build 10158 and have the same problem that I have had in previous builds,i.e. that my external drive is not showing despite being listed in Device Manager as installed and working correctly,have tried disabling re-enabling,uninstalling etc.etc. with no effect.
View 3 RepliesWindows 10 did an update on my wife's desktop that was incompatible with the Nvidia graphic drivers on it. As a result, the dual monitors no longer display. We took the computer to the local Microsoft store and they were fully aware of the problem and are working on it. But, after two weeks, the problem has not been solved. Meanwhile we bought a new desktop and had Microsoft empty the entire contents of the C: drive onto an external hard drive. They did and showed me that the external drive contained the root directory and program data that contains years of work using Lightroom.
I brought the external hard drive home and connected it. Luckily I can see the User Libraries but not the Program Data. Is there some way that I can make everything visible in the external hard drive so that I can copy the contents to the new desktop?
If I do a fresh install. What are some safe online sites I can back up my files? Drop box or one drive?
View 9 RepliesIn the past few days my external hard drive makes the sound (windows notification) like when I unplug it from my desktop. Then about 5 seconds later I get another sound and notification asking me how I would like to view content for G: (my external hard drive). I only have it attached to use for backups and I've checked my back up program (easeus) and my backups haven't been happening either. I used crystaldisk to check it and it's healthy. Why it would be essentially shutting itself off and on?
View 9 RepliesI have a 3TB external hard drive plugged in to my pc. I use it to stream movies and music to a couple of media players in the house via our wifi network. Recently it has disappeared from my view on the pc. When I plug it in via usb, nothing happens, yet when I plug it in to my daughters laptop it is recognised, leading me to believe it is a setting problem with my pc rather than a problem with the hard drive. How to make it work again.
View 9 RepliesAfter receiving the W10 download, I installed a WD My Passport backup external drive. I made a system image backup and system repair disc of W7, and I backed up other files, and uninstalled & reinstalled BitDefender Total Security 2015. At first it seemed to run well or adequately, although slowly, notwithstanding that I had cleaned everything.
Then I discovered a message/warning from W10 that I should check the settings & do a backup, enable File History, that no usable drive was found, and to use an external drive for File History, and to connect a drive or use a network connection.
I googled all these issues to find answers/solutions: I checked in Device Manager, Computer Management, System Configuration. I was able to see that WD My Passport was displayed as running properly, with "healthy" status, with 866 GB of free space, and I could see it listed as in drive .
I think that I do not know "how to connect a drive or use a network connection." I clicked on "add network location, it opened to select a folder, I selected several, but none were acceptable, so I had to leave it the way it was, Network Location (1) My Media: Lizzie-PC.
I cannot get my external hard drives to give me write permissions over my local network in some directions.I recently replaced our hard drives with SSDs and with the reinstall, I had some difficulty getting the permissions on my external hard drives working correctly.
I did several Google searches and read a procedure that I needed to go through adding a user called "Everyone" to each of my drives that I wanted to access and share. I did this and gave "Everyone" full read/write permissions and also went into advanced options (or wherever it is) and chose the checkbox to give all child files and folders these same permissions. It took ages but eventually it all seemed OK.
I had one folder which could not be corrected this way and ended up having go change each file individually. Anyway, I thought I was all set but if I try to move a file from Machine A to Machine B (the drives are attached to , I get an error that I don't have permission to do this. No overrides or Admin permissions are an option and when I check the specifics it *is* correctly shared with not only Everyone but this machine as well (so it attempted to fix the permissions itself at some point). However, if I go to Machine B and grab the files from Machine A over the network ...
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
View 9 RepliesI noticed I have a corrupted directory on my external drive and whenever I use FreeFileSync to backup my data, it flags it:
How to delete this unwanted directory? Every time I try to delete it, I get this:
I have 2 laptops, both using Win 10
Can I use Win 10 backup app to enable me to back up both laptops to one external hard drive?
Every time my computer reboots, some or all of the dialog boxes for my external drives open on the desktop. I am just wondering if this is an indication of something more serious going on or should I just forget it?
View 3 RepliesI have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
I purchased a 1TB hard drive to place media files on it so that I could plug it into my DVD player which has a USB port. I made sure to format the hard drive to Fat32. What I can surmise is that the 1TB hard drive is too big for the DVD player to read. I plug it in and it says Device Not Supported. But I've successfully plugged in an external card reader and used a 16GB SD card to place files on and it reads them fine. So I'm thinking it's the size of the drive that is the issue.
I might have to partition the hard drive into two partitions. One partition 16gb and then the other partition with whatever is left. They did say they were not sure if there was a way to set it up so the 16gb Partition is what is recognized first when plugged into the DVD player. This way I would transfer movies I want to watch to the 16 GB partition, and transfer them over.
Now when I search hard disk partitions in Windows 10 the manager comes up and I can see the hard drive, but I can not change the size to partition it. It's grayed out. Is there a freeware program that works with Windows 10 that will split the hard drive into two partitions in sizes I specify, and make sure that the 16GB partition is the first one loaded or seen? And if I set it up that way when I plug it into my computer will the computer see both partitions?
I'm trying to change the name of my External Hard Drive as it appears as Local Disk G on my laptop. However, upon trying multiple times it keeps on coming back as Local Disk G.
View 9 RepliesI have an external hard drive and when i try to open it, it says access denied.. when i try to see the ownership, it says unable to determine owner.
When i try to change the ownership through various methods like cmd prompt take own or by going to the properties of the drive, it says unable to set new owner, access is denied...
My external hard drive is showing an error.
G: is not accessible.
The disk structure is corrupted and unreadable.
How to fix it without formatting it? Have a lot of file on there that I'd like to recover if possible.
