Fast Boot - How To Turn Off
Feb 10, 2016Different usb keyboard from original not recognized...
View 1 RepliesDifferent usb keyboard from original not recognized...
View 1 RepliesI recently upgraded my SENS 900X Samsung laptop from Windows 7 Home Premium to Windows 10. I did the easy upgrade, not a clean install. I did reformat my computer while it was in Windows 7, updated it, then upgraded to Windows 10.
When I turn on or restart my computer, I get a message which says:
I found : Link: Fast Startup - Turn On or Off in Windows 10
However, after performing step 3, I get this message: "Your power plan information isn't available. Access is denied."
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
I have a new configuration (z170 chipset, i3-6320, fast SSD) for my desktop and it boots slower than my laptop (Acer V3-574G (i7-5500) with the same SSD as my desktop). I don't think the i3-6320 vs i7-5500 can explain such difference.First thing is that Hibernation and Fastboot are activated but not working on my dektop PC: command "Get-WinEvent -ProviderName Microsoft-Windows-Kernel-boot -MaxEvents 10 | Where-Object {$_.id -like 27}" gives me 0x0 (cold boot from full shutdown). Parameters ares ok in settings and in registry (hiberboot = 1).I tried using Fast boot and MSI fast boot in the bios: no effect. I tried to enable win10 whql in bios but it is disabled after rebooting, with a warning message saying that my graphic card does not have GOP.So, I'm not able to fast boot due to an "old" hd7750 graphic card ?
View 9 RepliesSo I just upgraded my wife's computer and noticed it loads directly to my account which has no password. When I restart it never asks who's account I want to logon to, just goes to mine. Of the three computer I've upgraded this is the first to do this. Also in the power options I can't find the option for fast boot.
View 1 RepliesLaptop is Lenovo X220 that had Windows 7 Pro and upgraded to W10. It has had already 5 vanilla installs of 10 Pro 1511 on it.
2x install with an old 3.5" 5400 RPM stock HDD drive and the 4-5th and final install with an upgrade to an SSD. The HDD was changed to SSD because of me thinking the HDD was dead and was causing the computer to lock up at boot.
Tried 3 different operating systems on the machine as well, Windows 7 (no problems) (stock with computer), Windows 8.1 (with Fast Boot) enabled and no problems on Windows 8.1 O/S and finally W10 PRO 1511, vanilla from Microsoft directly.
For some reason after W10 installs, does its updates, reboots, drivers are updated and everything seems fine after a couple of reboots and such. Works normally, wakes up from sleep. Only 3 programs get added. Firefox, Chrome and WinRar.
After that shutdowns OK, but when she boots up it gets past the welcome screen and hangs on the desktop. Complete hang everything becomes unresponsive, but the mouse pointer. I can dance the pointer around but No keyboard input no GUI input, nothing. Only way to come out is with a POWER BUTTON DOWN. Was trying to solve this issue since December and never found any solution, thought it was drivers or internet, or hardware but nothing, no dice. Even if it didn't connect to the internet after install and a program or 2 were added via USB and I shut down it would hang upon next boot.
So I did reading and reading and researching and I came upon a thread that mentioned W10 hangs on welcome screen with Fast Boot on, I thought no this can't be it because I make it past the welcome screen. I hang on the desktop when I'm actually in Windows. I can manage to click Start button and the system will hang. Only way to get it to respond is to hold down the power and power it down. Temps seem OK, MEMTEST came back fine, replaced HDD with SSD, only other thing I could think out was drivers or hardware (mobo) failure or something else ....
Then I decided to clean install update drivers via Internet, reboot and then disable FAST BOOT via @Brink regedit hack, because for some weird reason, on this machine on every clean install, FAST BOOT IS NEVER SHOWED in the POWER menu. I could not understand this. I do not have this option at all like @Brink has in his diagram photo. The option is just not there!!! But the registry though the hiberbootenabled value is set to "1".
So two questions, why is it checked and greyed out (that I cannot uncheck it) and 2, the only way I was able to change the value was manually via @Brink registry edit.
OPTION 2 - using a bat file because option 1 was unavailable.
Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
Once I disabled FAST BOOT, the laptop has been fine since. No locking up anymore period!
SSD is 850EVO and W10 PRO is the only O/S on the machine, legit with digital entitlement upgraded from W7 PRO key on the Lenovo, because its an X220 thinkpad so 'business' series. No problems since.
#1 Fast Boot option to disable on startup is not avialable on the machine? Value is "1" in registry but cannot make changes to it via control panel as it simply is just not there. (This was the case with both HDD and new SSD). Windows 8.1 shows the option, not 10.
#2 Hangs on startup after welcome screen
#3 Only way to prevent is to run the .bat file from @Brink or manually edit value in regedit, save, exit, shutdown, go on with life.
AFAIK value in REGISTRY is set at '0' and machine works ....
Brink has this option on his machine via control panel but I do not on the laptop. Brinks:
My PC does not give me that option at all. Is if it doesn't even exist.
I've been in the Windows Insider program since it started, getting every new build, and I usually hibernate my PC to keep all my apps open, only rebooting for updates that need it.
This has been fine on Windows 8, 8.1 and 10, up until the November update. I downloaded the initial, "faulty" November ISO with the media creation tool, but didn't get round to installing it until after it'd been pulled and reinstated. So I used NTLite to integrate that update in to the ISO I already had and did a clean install of that.
Everything was great until the next morning when I turned it on again. It booted as normal until it got to the Windows boot screen, which flashed on screen for 1 second or so before the PC just instantly powered down, like someone had pulled the plug out.
I troubleshooted this for ages and eventually worked out it's hibernation and fast boot - the only way to make the PC boot properly again is to go in to the BIOS and change the amount of memory given to the integrated GPU so you're effectively changing the hardware of the machine, which makes Windows dump the hibernate images and boot from scratch.
I've been reading that having fast startup on in windows 8/10 can cause issues with dual booting systems with other operating systems installed like windows 7. I have windows 7 on one ssd and going to have windows 10 on a second. Will i have to disable fast startup in windows 10 or any other type of hibernation settings.
View 1 RepliesInstalled MSI's "Fast boot" software, upon restarting every time I am greeted with a bluescreen mentioning it not detecting a device.
MSI Fast boot also seems to increase the time it takes for the mouse and keyboard to start so when it asks "Press enter to Retry, or F8 to change settings" i cannot do anything as the keyboard and mouse are not on.
If its possible to fix this without reinstalling.
So I installed windows 10 on my PC yesterday, I used to have windows 7. Today I turned on my PC and it says that I can choose to open my PC in windows 7 but not windows 10. So I thought OK I'll just try that, Then it said an error 0xc0000428 and it won't let me turn my PC on, I press enter and it enters the same loop of saying the error and selecting what version of windows I want to open.
View 1 RepliesI recently built my computer, and it was working fine, I installed all of the drivers, but when I installed my graphics driver, my monitor just turned off. Now when I try and boot my machine, it goes to the windows 10 logo then nothing. My screen is black and my USB connected devices just turn off.
Specs:
mobo - asus m5a97 r2.0
GPU - Zotac GeForce 760
CPU - amd fx 8350
PSU - corsair 600w
Does the new Maps app being built for the phone and PC features voice turn-by-turn navigation? I know the current Maps app does not. You need to use Here Drive or another third party app for voice navigation.
View 1 RepliesI am having problems with me Mouse and key board, on boot up they will turn on for about 20 seconds then turn off. Then a error comes up,inaccessible_ boot_drive. But if I restart my pc the mouse and keyboard will do the same thing but instead of the error I get, choose keyboard layout, and a list of options but I cant choose them because the mouse isn't working. This all started happening after I upgraded my power supple but I when I put my old power supple in I had the same problem. I have windows 10and I have tried using different keyboards and different usb ports.
View 1 RepliesI installed the 10532 build, but I have a little problem with Edge : when I connect to Facebook, I can't navigate quickly, sometimes it freezes, and I must clic several times with my mouse if I want to write any comment.
View 1 RepliesHow to enable fast startup without enabling hibernation windows 10?
View 2 RepliesI do need password protection but I also need the screen to give me a little more time! I am required to enter a password after only about a minute of inactivity.
View 4 Repliesi just realise my laptop got a window 10 upgrade for free.My internet speed is not very fast, everytime i close and open it, it restart from 0%My internet download has no limit but its just not very fast...So can i pause and resume the download??
View 14 RepliesI'v got a problem. I had 1TB HDD and fast startup was working for me, but when I move my system to a 120GB SSD, I cannot enable it. I'v got Win 10 PRO x64 and laptop MSI GE72-2qf
View 6 Replieshow to make windows as fast as possible :-)
View 7 RepliesIssues regarding hibernation on laptop? Since upgrading to Windows 10 I've noticed that my laptop seems to be going into hibernation much more quickly than it did in Windows 7. I checked my settings and my screen saver settings and so on are setup to those recommended by HP but these do not seem to be having an impact on hibernation. What's particularly frustrating is that even when it's plugged in if you have a long download/install/update you must keep the machine active by moving the mouse or be active on the keyboard or it will go into hibernation mode very quickly (under 5 minutes).
View 4 RepliesI deleted a couple of files that I later wanted to restore. After a couple of hours the recycle bin emptied everything in it. How do you reset the time it keeps files in the recycle bin so as to make them easy to restore?
View 1 RepliesI have the following problems With the fast start up enabled only
1. The screen never appears past the post bios screen.
2.Wifi won't connect. I have to manually disable the wireless adapter and then enable it.
If the fast start up is disabled then this won't occur.
Since installing Windows 10 my lap top battery drains very fast and sometimes goes from 30/40 % to shut down in minutes.
View 1 RepliesHaving problem with a computer that will not shut down completely after Windows 10 update? I have one and discovered that if I turn off the fast start option it will shut down all the way.
View 4 RepliesRecently I upgraded from Windows 8 to 10 with keeping all files in place... When I started.. I disabled facial recognition to login.. Now I cannot log in to my windows 10 because it is hanging..
View 1 Replies