Recently, I have observed the Search feature of the File Explorer does not work (e.g., No items match your search). The folders I'm searching are indexed. I've tried rebuilding the index. I can even drill down to a folder I know contains the sought file and entering a search word in the file's name and search returns nothing.
For example, D:UsersClayton is indexed with no exclusions (all subdirectories included). I can search from D:UsersClaytonBooks for 'code'. That folder has many subfolders with files containing 'code' in the filename/contents. Yet search returns nothing.
D:UsersClaytonBooks is shared to my HomeGroup. I thought perhaps that might be a factor. However, even if I stop sharing, the results are the same. Most of my existing shared folders exhibit this behavior. However, if I add a folder to my Homegroup, search seems to work.
I just don't get it. I have successfully performed searches like this in Windows 7 all the time. Is Windows 10 just broken?
UPDATE: From my laptop (also Win10), I can search the Books HomeGroup share and find matches. However, going back to the desktop machine where the share resides, the same search fails.
UPDATE 2: On my desktop, if I remove D:UsersClayton from my indexed locations, searches work. This is repeatable. When indexed, search fails. When not indexed, search works.
Windows 10 file explorer, search,advanced options. I have file contents unchecked. but still get results from within documents-pdf,odt,doc,etc.I have file indexing turned off. How do I just get names of files and folders?
When I click on the Folder on the taskbar the only thing that happens is that the desktop goes off and right back on. It works in the Start Menu just fine. When I left click and drag the icon, it just show a list of the programs that are pinned to the taskbar.
I upgraded to W10 on the 31st July and all well apart from intermittent stoppages in File Explorer.
There have been 4 stoppages over this period and an identical one at boot up this morning.
It is reported in Reliability Monitor although I have neither seen or experienced any problem in running File Explorer.
Reliability Monitor gives no error details and auto reports have been sent to Microsoft. I did do a restart in Task Manager yesterday but it occurred again this morning. However in Event Viewer I saw the following for this morning stoppage:
Recently I posted a thread about control panel not working. Finally got it started by opening in file explorer. Once it started there it would open from any of the usual places. My problem now is that File Explorer is doing the same thing control panel was doing. Can't seem to start it from anywhere. I just get the "wait" circle for a second and then nothing.
The file explorer stopped working. I tried to start the sfc /scannow utility, however the dos cmd prompt for admin does not come up. I tried a regular dos command, but apparently does not have admin privileges. My computer account has admin privileges.
My desktop will no longer come up upon startup, it's just the blank wallpaper with no folders or shortcuts.
Sometimes it will reappear, and the Desktop setting Automatic Arrangement is checked, with all my files out of place.Another problem, the computer will not shut down. If I start a shutdown the screen goes blue and displays "Shutting Down" perpetually. I let it attempt to shut down all day and all night and there was still no change. (I have to flick the switch attached to the power supply at the back in order for it to turn off, I cringe every time) The start menu also doesn't work properly either, anytime I click the My Stuff tab on the search the start menu and taskbar freeze.
In the file explorer, when I right click on any file/folder windows explorer freezes.I have avast antivirus so I have done uncountable virus scans and it continues to say that malware isn't present
A friend of mine told me that upgrading to windows ten makes it way buggier than a fresh install, so I've tried many times to perform a backup(That way I could clear the hard drive, fresh install w10, and still have my files stored somewhere) but Windows backups nor file explorer will recognize my extra hard drive. I just tried to use Avast to make a rescue disc with my 500gb flash drive and it froze... like I literally just tried that while writing this and the application isn't responding... Neither will windows media creator work when i try to turn my flash drive into a bootable disc.
(P.S: I tried disabling smart shutdown in the power settings, it's already disabled and doesn't work either way)
When trying to copy and paste a file from File Explorer (or Desktop), my "Paste" operations remains disabled. As if the copy operation never actually copied the file. I also noticed that when I select "Cut" (file/icon becomes somewhat transparent), then moment I right click on the location where I would like to paste, the file/icon that the transparency stops, and once again the "Paste" function is not available.
The same goes for Ctrl+X/Ctrl+C and Ctrl+V. This also does not work.
When I boot into safe mode the operation works however, and intermittently in "normal" mode the operation does work. It seems as if some service/driver/thing stops the functionality.
I have a quite good PC (i7, 16GB RAM, NVIDIA Quadro K600 graphics and on-board Intel HD Graphics 4600, newest drivers). I used 1920x1200 monitor without any issues. Now I have UHD monitor (DELL P2715Q) which works perfect but I have one strange issue - File Explorer stopped working. When I try to start File Explorer nothing happens for few seconds (PC's fans work louder for a while) and then Windows Explorer restarts. And that's all. It's the same on both graphic cards. New monitor is connected via DisplayPort, for old one I used DVI connection.
When I connect my old monitor File Explorer works as usual (without restarting the PC, just switching monitors).
Under the Network tab of File Explorer, I can see three entries, one of which is my router (with attached Hard Drive) and two computers, each running Windows 10. When I expand the router entry, I can see my hard drive files. I can also see my Users icons when I expand one of the computer's tabs. However, when I click on the other computer's name to search for users, all I see is a message that "This folder is empty". In fact, the folder is not empty, as there are two users on the computer. How I can get this computer to show users, etc.?
Using Win10 Pro x64. I would like to disable windows showing .zip files in explorer as a folder...When you highlight it the contents inside the .zip are shown in the right pane view. I've scoured the net and found ways for Win7(which I did disable .zip folders on my other Win7 machine) and Vista, perhaps 8 too but I don't want to risk trying a method for older versions of windows. Any solution/reg hack or whatever to disable .zip folder?
I just installed Windows 10. Not sure if I like it, but I'm trying hard.
Problem: When I go to File Explorer, in the left panel, when I click on a folder name, the contents of that folder (both sub-folders and files) show in the right panel.
In the left panel, when I click on ">" beside a folder name, it will expand in the left panel showing the sub-folders, but not "loose files".
I could have sworn that in earlier versions of Windows the files also showed.
Is there a option setting somewhere to change this behavior and to show the files also in the left panel?
I just got new computer with WIN10. Before that I use win7. I want to set Internet Explore and Google search as my default to use on the internet. Can I do that and how to set it up.
I don't have the vocabulary yet to state exactly what is happening.
I upgraded from Win 7 and Win 8 on several machines....though I was reasonably happy with Win 7 and Win 8.
After a few months, win explorer started to misbehave on my desktop, but the laptops are not going crazy.
In performing editing and relocation of folders, win explorer was slow to update, and deleted folders were still showing. Certain content seems to hang it up, such a video files. Closing and re-starting WE did not fix the issue and sometimes only a reboot would reset things.
The issue seems to be in the search function. If is always indexing and looking for something and the cursor circle is always in action and the hard drive is working like crazy.
More annoying is that a new windows has shown up with tabs across the top for selecting what is to be displayed and how. I cannot simply get back to the good old WE detailed view that I work with. Where did this new window come from?
I can set an alias in the hosts file on a win7 machine and access it just fine but doing the same in Win10 prompts for creds that never work even when entered correctly. What did win10 change?
hosts file entry: 127.0.0.1 hostname alias
ip - works fine hostname -works fine alias - Prompts for creds and creds don't work
I have gone to the extent of fully disabling UAC from reg, same outcome. Network and file sharing is set to password access and not homegroup. Simple file sharing is off.
Something to note. I always disable ipv6 form the adapter but when I ping my hostname it shows the ipv6 loopback. Why is that? When I ping the alias it returns 127.0.0.1 ipv4 loopback that was entered in the hostname.
Having migrated from Windows 7 to Windows 10, I now find that I cannot search for files. I select "This PC", type "bpextract.dat" in the search box, press enter and nothing happens.
In Win 7, one clicked on Start and you could then search for any file in your entire computer by entering its name (or part of it's name) in the file search box. In Win 10, you have to ask Cortana who won't locate a file for you. Where has the file search box covering all data files on the computer moved to?
I have a file named IMG_20151218_0001.pdf. How can search it when I only remember it has 1218 as a part of the file name? I tried some of the searches and the result is empty, such as filename:"*1218*", *1218*, and "*1218*".
When I search for *.mp4 in Public Folders > Video, the results don't show the file. The problem is the file is in there. When I search *.* in Public Folders it is not shown either.
When I search the entire C: drive, though, it shows up in the Public Folders > Video directory.
I have a large number of research articles on my laptop (via dropbox). One thing I loved about Windows 7 was that I could just hit the Start button, type a keyword into the search box and a results window would pop up that listed every matching document on my computer. I was also able to customize this so that it always came up in "Details" view.
I can't seem to get that same thing with Windows 10. When I type something into the search field on the task bar, I have to first select that I want it to search my stuff and not the web. After I do that it will only bring up a limited amount of results. I have to click again to see the whole set of hits--and then if I hit "Folder Explorer" at the bottom of the menu, it brings up the results in "Tile" view.
First, I can't figure out how to set the Folder Explorer default view to "Details".
Also, is there a way I search directly into Folder Explorer via the task bar search box?
Next, I don't mind that the taskbar offers me the option of websearch
I'm talking about pressing <Windows> and typing in a shortcut name that lives in C:Users<name>AppDataRoamingMicrosoftWindowsStart MenuPrograms.
Simply put, it doesn't find the shortcut. And I don't feel like rebuilding the entire index, since I doubt it will solve the problem. This was broken on 7, 8.1, and now 10. You'd think they could index a particular set of files from a particular folder.
Win 10 search is not working. I did get it to work by signing in as a local account and than back to signing in with a microsoft account. After a reboot it works. I wonder if it has something to do with Cortrana?
Win7 could put in any word and Search would find the file it was in - lovely. Now Win10 doesn't do this - I have to search from the Documents folder - wastes a lot of time.
Many times Search won't fine a Word file unless I put a full stop afterwards. So 'Letter' not found but 'Letter.' found.
