Floating Taskbar When Dual Monitor?
Jan 27, 2016
My taskbar is out of place when I connect the second monitor. I extended the view.
It happens now and then. I think it seems to be working fine until I install the internet download manager. But again it might just be my suspicion.
Once I plug out the second monitor, the taskbar goes back to normal. This issue is the same for the wall paper. When i connect, the wall paper will look ok on the laptop but looks cut away in the second monitor. Same thing goes, once I plug out it will go back to normal.
View 5 Replies
Similar Messages:
Nov 22, 2015
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
View 9 Replies
Jul 29, 2015
I just updated to Windows 10 and already having problems. I have a dual monitor setup and back on windows 8, both monitors had a good display. Now on windows 10, my main monitor has a blurry or less quality compared to my second monitor. It was always fine until I switched windows.
View 3 Replies
Jul 31, 2015
[Monitor 1] [Monitor 2]
{Taskbar 1} {Taskbar 2}
I want to have it so if I open Chrome is Taskbar 1, it'll open on Monitor 1... and same with Taskbar 2 on Monitor 2.
Right now, they all open on Monitor 2 (primary). How to make it if I click on an icon on T1 it'll always open on M1 and T2 on M2?
View 2 Replies
Aug 1, 2015
I've got a dual monitor PC running the now released windows 10. Everything about it went very smoothly, right up until I tried to change the background. At first both screens had the same image (that cool windows 10 logo with light beams picture). But of course that wasn't sufficient, so I changed it. I liked that windows 7 would rotate my wallpapers with pictures in my photo library. So I dug in and made the necessary changes, and.... then I hit an odd snag.
The two screens were showing different background pictures. At first it was cool! I was blown away. I never even thought about changing the wallpapers separately! But, I'm a creature of habit. And having that second monitor with a different wallpaper was getting on my nerves. Now, I know I can change both wallpapers to be the same picture. BUT, I'm greedy and want it all! I want it to also show the slideshow of all the photos.... one at a time, on both screens, at once.
On a side note, whenever I right click the desktop and ask windows to skip ahead to the next desktop background, it does one screen only. I have to do it again and then the other screen will change. If they HAVE to be separate, I'd at least like some control over them.
View 9 Replies
Oct 21, 2015
I have Dual Monitor but both have different resolutions.
Main one is 1920 x 1080 and other one is 1280 x 1024.
I want to set the same wallpaper on both but this is how it looks:
It's displaying nicely on the second monitor with black on the top and bottom.
But on the first one there's black on left and right of the screen. This is with every wallpaper I use. I am using the "Fit" style for Wallpaper.
View 1 Replies
Sep 30, 2015
I am running Windows 10, and trying to calibrate my monitor which is the #1 monitor on a dual monitor setup. I am using the Spyder 4 Express for calibration.
When I put the calibration device on my #1 monitor and go through the calibration process, it saves the new profile, but the new profile does not correct the #1 monitor, it is effecting the color of the #2 monitor.
View 2 Replies
Sep 7, 2015
I'm trying to adjust my snap/multitasking settings to keep all of the snap settings in Windows 10 except for the ones that try to snap windows to the side of one monitor when I try to drag it to the other monitor. Is there any way to disable the snapping between the two monitors while still keeping the snap settings of dragging windows to the opposite sides/top of the screen?
View 1 Replies
Feb 10, 2016
I've recently setup a secondary monitor, but the mouse simply wont lock into the screen where the game is being played (total war) and if i do end up clicking somewhere on the secondary monitor the game will be minimized which is bothersome, I have tried borderless and fullscreen but in vain.
Another issue I've had is that the secondary screen (1600x900) gets some flicker/lines whenever i use vga to connect it, but it works superb with dvi, why?
Now another thing is that when i move the mouse/cursor from the top right corner of the main monitor(1920x1080) it wont switch over to the secondary one(my idea being that the res/size is different).
video example: example - YouTube
View 1 Replies
Oct 6, 2015
After upgrading to Windows 10, the "extend displays" function is not functioning well on my PC (ASUS monitors; ATI Radeon HD 2400 PRO display adapter). I have tried disconnecting & reconnecting and have tinkered with most related settings I am aware off, but all in vain.
I found a crude workaround accidentally. I restart my PC from the log in screen until the dual monitors start in the extended view (how this works!). It usually takes about two to three restarts.
View 3 Replies
Oct 31, 2015
My dual boot configuration has 10 with classic shell and 7 pro. Classic shell has settings for taskbar which control opacity and color. My 7 just showed a nearly transparent taskbar so I went to 10 and changed classic shell taskbar settings to opaque then back to 7 and the taskbar was now opaque.
View 3 Replies
Dec 21, 2015
I have this weird taskbar/toolbar on my 2nd monitor it just gets in the way and can't find any kind of setting to deal with it.
View 2 Replies
Jul 30, 2015
Is there a way to duplicate the taskbar to my second monitor? Right now, there are no toolbars, notification icons, search or date/clock.
View 9 Replies
Oct 17, 2015
I have two displays or monitors, side by side.The taskbar clock only displays on the right monitor. I would like it to display on the left monitor, or both monitors.How can I change this?
View 2 Replies
Oct 23, 2015
I use the start menu of the secondary monitor to open an application, that application open on the primary monitor.
Is there a way to get that application to open on the monitor I started it from. (Using the Start Button of that monitor) ?
I don't actually get the point of having an extra start menu taskbar on that second monitor if it actually open the application on the primary one instead of the current one. It defeat the purpose of having a Start button on those secondary monitor. (I means if you gonna open an application on the primary one, I might as well just use the Start button of the primary one!!)
Also i'm having a second issue related to the first one i guess:
Example: I open ChromeFile Explorer or whatever on my secondary monitor and close it. When I try to open a new one on any monitor it would open it at the LAST KNOW LOCATION of where I closed it.
This is very annoying when you use "Virtual Desktop" "Multiple Monitor" If I open an application I expect it to open where I launch it from(Monitor,Virtual Desktop etc).
View 1 Replies
Sep 27, 2015
My task bar is locked and located on the right-hand side of my second monitor. Occasionally I'll go for it and realize that it is now located on the right-hand side of my primary monitor. Most recently this happened after bringing my computer back from screensaver.
View 7 Replies
Sep 1, 2015
I"m not sure what I did, but my desktop has changed. I tried to attach a screenshot, but don't think I did it correctly.
Here's what it looks like when I touch the start button.
-My start menu items are floating sort of to the right, in the position they normall are.
-However, this is where it gets wierd.
-Veritically, on the left
1. Start button
2. a button which brings up All Programs
3. Power button
<large blank space>
4. All the way at the top, a button which when clicked shows most used apps.
View 4 Replies
Jul 31, 2015
I have been installing windows 10 all went okay, but then screen went blank and the floating "input not supported" was showing.
View 2 Replies
Nov 27, 2015
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
View 6 Replies
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Aug 10, 2015
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
View 1 Replies
Aug 14, 2015
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 Replies
Sep 23, 2015
I am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
View 1 Replies
Sep 24, 2015
A few days ago, after an automatic Windows 10 update on my desktop computer, I found that: right clicking icons on the taskbar does nothing - none of the options appear; the start button on the left of the taskbar only works by right-clicking and accessing the old Windows 8 style options; the search icon on the taskbar does nothing; the Windows 10 calculator has disappeared - when I press the calculator key on my keyboard a message appears saying "You'll need a new app to open this calculator". It seems to have been deleted from the computer.
Until these things happened Windows 10 was working well.
View 7 Replies
Jul 25, 2015
I'm using Build TH1 10240 with all updates (just checked before I posted this to be sure) dual booting W7 and W10 with no known problems other than the taskbar issue.
The taskbar hides and appears fine when nothing is up but the desktop, or the settings window and other items from the computer but doesn't hide when a have IE up, I'm using IE11, just don't care much for Edge yet, maybe as time goes by I'll start using it more.
Anytime I have IE up the taskbar stays visible and will not hide, I went to properties to reset it, tried this a few times, uncheck the box>apply, then check the box>apply, after I click apply the taskbar momentarily hides and immediately pops back into view.
I know others (Jimbo) were having an issue with this on earlier builds. It didn't happen every time for me, just every once in awhile but on 10240 it's every time.
It's not a huge thing but I've always hid the taskbar and would like to do it on W10 too.
View 4 Replies
Aug 15, 2015
I would like to know how to dual boot my win 10 pc with osx as my secondary os. I need mac as I need to see important messages that I receive when I use my pc.
View 1 Replies