New computer with Windows 10, will not show the floppy disc drive in File Explorer after plugging in. Floppy disc IS in the disc drive when plugging into the computer; then when opening File Explorer, no disc letter or item is shown for this drive. How do we make this work?
View 14 Replies
I'm using Windows 10 on my PC. I have been using it for about 3 months now and I regret installing it. There is so many problems with it. One of these problems is my disk drive will not play or run any disks I insert into it. In the file explorer, the disk drive is not present in the "Devices and Drives" section. However, It is still present in the Device manager.
View 1 Repliesi have an annoying problem. when i plug a usb drive, the file explorer shows the same drive with the same drive letter twice. it's no big deal but annoying like i said..
View 4 RepliesI need to replace the personal.xlsb file to my Excel XLSTART folder on my C: Drive but I do not seem to bore down to XLSTART using file explorer. If I go to this pc and choose C: then Users, then my user name I get only such things a Documents, Favorites, One Drive, etc. I need to get to AppData and then bore down to XLSTART. how to get C: completely?
View 2 RepliesI can not boot in uefi mode or with secure boot on, I can only use CSM mode. Also when I try to boot without usb drive(which has win 10 on it) in computer it just shuts down and then turn on back and give me error that all boot options have been tried press f4 etc
View 9 RepliesI just bought a new 2tb HDD to replace my ancient 160gb one. Since I'm overall very happy w/ my Windows 10 installation I decided to clone instead of install fresh and used Macrium Reflect to clone the drive. Upon switching from the old to the new one, I was disappointed to encounter a bluescreen boot error, after the Windows logo and spinning symbol had been displaying for a few seconds: Error 0xc00000e, system_service_exception. Trying to boot into any variety of safe mode gives the same result. I didn't think this was an MBR issue based on how far into the boot process it happened, but I tried repairing / rebuilding the MBR anyway and it didn't change the problem.
The weird thing is that when I plugged in my old drive to boot to it and troubleshoot, my system actually booted to the new, clone drive, and it works perfectly - exactly like the old one did - but it only works like this with the old drive plugged in.
See this image: [URL]
Obviously the new drive is the larger C:, which is correctly flagged as system, active, primary, etc. D: is the old drive. (Before I cloned and switched, the old drive was C.)
I suspect the issue might have to do with the un-lettered 450mb recovery partition I didn't clone over from the old hard drive, but I'm not sure. Everything looks to me like the C: drive should boot on its own, but it just doesn't.
Under the Network tab of File Explorer, I can see three entries, one of which is my router (with attached Hard Drive) and two computers, each running Windows 10. When I expand the router entry, I can see my hard drive files. I can also see my Users icons when I expand one of the computer's tabs. However, when I click on the other computer's name to search for users, all I see is a message that "This folder is empty". In fact, the folder is not empty, as there are two users on the computer. How I can get this computer to show users, etc.?
View 6 RepliesUsing Win10 Pro x64. I would like to disable windows showing .zip files in explorer as a folder...When you highlight it the contents inside the .zip are shown in the right pane view. I've scoured the net and found ways for Win7(which I did disable .zip folders on my other Win7 machine) and Vista, perhaps 8 too but I don't want to risk trying a method for older versions of windows. Any solution/reg hack or whatever to disable .zip folder?
View 5 RepliesI just installed Windows 10. Not sure if I like it, but I'm trying hard.
Problem: When I go to File Explorer, in the left panel, when I click on a folder name, the contents of that folder (both sub-folders and files) show in the right panel.
In the left panel, when I click on ">" beside a folder name, it will expand in the left panel showing the sub-folders, but not "loose files".
I could have sworn that in earlier versions of Windows the files also showed.
Is there a option setting somewhere to change this behavior and to show the files also in the left panel?
When I edit a .mkv file (rename, delete or copy/move) on one of my partitions, file explorer freezes and I need to restart it with taskmanager.
I haven't encountered any other files that cause the same freeze as this one (yet..).
I already searched on google and tried editing from a webbrowser and the drive is defragmented automatically, so I don't know what to do.
Ever since I upgraded to W10, I get this problem wherein if I insert a disk in either of my two optical drivers, it would take Windows forever to read them and if I click them before they complete loading, Windows would become unresponsive and Explorer would crash. Mind you, it also happens even if the contents of the disk have already loaded. But even though the contents of the disk have showed, they all have blank white icons.I already tried sfc /scannow and they it reported no issues.
View 1 RepliesI'm currently on a PC with a 250GB SSD (Samsung EVO850 M.2). Recently my PC suddenly was out of storage and I wondered why, since I though I still had at least half of the storage free.
So I decided to run WinDirStat to figure out which directories were taking up all the space. As you can see in the screenshot it shows completely different values for the used space by the C drive. For your info, I only have a C drive, no second disk or second partition.
I have recently bought Windows 10 for my new PC and I do not have an optical drive. I am not sure how to put it onto a USB drive so I can install it from that. I've looked all over but I can't find a solid way to do it. I also only have a iMac as another computer so I'm not sure if it will affect how to put Windows 10 onto the USB drive. I need the most specific instructions that you can give me.
View 1 RepliesMy WD red 1tb hard drive wont appear on disk management but I know it is being found some how because it comes up under hardware.
View 1 RepliesI wanted to get more space in my c drive and used mini tool to move 100 gbs from my d drive to the c drive (local drive). Then i tried defragmenting my c drive but the results were the same every time. I defragmented the c drive 30 times with different software and stuff but the results didnt change.
View 8 RepliesI have successfully upgraded to Windows 10 from Windows 7 (and solved the initial network connection problems).
However my OS has a lot of crud from the pre-upgrade state and I would like to do a clean install of Windows 10, without losing any old data files. I've read online guides on doing clean installs of Windows 10, but it is not clear whether you can only install into partitions that already have a valid Windows OS installed.
My computer has two identical hard disks, one of which is (or can be made) blank so what I would like to do is keep one with the 'cruddy' version of Windows 10 - at least until I have copied over all the files I want to keep and made sure I've installed all the software I want on the new 'clean install' Windows 10.
So, are there people out there who have done this? Are there things I should look out for?
I have a program that I wanted to install into my Win 10 Pro Machine (64 Bit) and have found that the disk can not be read by the DVD/CD-ROM Drive. I also tried it in another Windows 10 Computer (64 Bit) and it also can't read the disk.The disk worked fine under Windows 7, in both the same computers. The drive works as it reads other CD/DVD's.
The disk is good as it works perfect in an other Windows 7 (32 Bit) and Vista computers (32 Bit). Computer is up to date with builds etc.
After downloading Windows 10 my disk drive has stopped recognising that I have any sort of disc in it, I believe this is because of the Windows 10 download as I was using it up until the point of the upgrade.
View 1 RepliesI am getting a low disk space message from my system backup drive. It's 1 TB and it is full. There are not any files that I can delete. They are all system files.
Two questions:
1. Why is it so large?
2. Can I install a new larger drive and have it move the system files there?
Two nights ago, I had a brief power outage at my house. Since then, my Windows 10 preview installation will not boot. It keeps giving a boot disk error. I first tried booting from my Build 10166 disc created from ISO and running the startup repair. I've seen errors using this tool on previous Windows versions, but the computer quickly rebooted, so I thought it was successful without errors. Nope, I still get the boot disk error message.
I booted again with my installation disc and tried running the "Refresh" option. This time, I get a message that the drive containing my Windows installation is locked and that I should unlock it before trying again. How I can unlock the drive? Unless I figure that out, it sounds like I will have to perform a clean installation.of Windows 10, which I don't really want to have to do again.
Ever since I upgraded to Windows 10 Pro 64-bit, programs, especially games, suddenly halt and the disk light comes on. This is especially annoying during games as everything halts on-screen until the disk light goes off. I was just playing Assassins Creed Syndicate and the dialog would go silent while the disk light was on. It's almost like Windows 10 is halting while a load is taking place.
I originally thought my games disk was beginning to age but this happens in IE, Firefox, Thunderbird, etc., which are on a different disk.Does Win 10 have a disk management issue? I just happened to think that my page file is on a separate disk from Win 10 and my games. Could this cause an issue?
My old Windows XP Desktop stopped running 2 weeks ago, with a No OS Found error. Since then I've taken the hard drive out and connected it to my new Windows 10 desktop with a USB 2.0 to SATA Adapter. It does not show up in "My Computer", but is detected in Computer Management.
The drive's an old Western Digital WD2000 one, and started clicking (for a few seconds) as soon as I attached it to the PC w/the USB Adapter. The clicking stopped after that.
It shows up as "Disk 1, Unknown, with the amount of data on it (186.31 GB [out of 200]), and is Unallocated. I've already tried numerous utility and Data Recovery programs, such as Recuva, MiniTool Partition Wizard, EaseUS Data/Partition Recovery. No luck with these.
They were either not detected, or didn't find anything. MiniTool Partition Wizard said it's a "Bad Disk" I
Partition Find and Mount is still conducting a scan which has been going for the past 7 hours (35%).
BTW - I really can't leave the hard drive on for the night to conduct a long scan. It's been overheating, and I already have a large fan next to it to cool it down. It's not safe to leave this on for an extended period of time.
Only to find out I bought a USB 3.0 Adapter instead of a 2.0 my old XP supported when It still ran.
Since I upgraded to windows10 I am unable to watch movies from a DVD. I can read other kinds of disks just fine, just not movies. For instance, I wanted to watch the sixth Harry Potter movie. So I enter my DVD but my laptop just says there is no disk entered. I thought there was something wrong with my DVD at first. But it works fine in all other devices I have at home. So then I thought the problem must be my disk drive. But then I inserted the bonus DVD of the movie, and this one worked fine. WHAT? How is this even possible, both are DVD's, just the bonus disk doesn't have a movie on it. I tried this with all the harry potter movies we have at home and the same occurred each time, the movie DVD does not work but the bonus DVD (with behind the scenes and whatever) works fine. I have searched all over the internet and haven't found a solution. The only thing I find is people of which their Disk Drive isn't found anymore. But this is not my problem.
P.S.: It's a laptop, the details can be found on my profile I believe. And I wasn't really sure in which thread I should post this. As it isn't really a hardware problem, I don't think it's a driver problem (my pc says drivers are up to date) so I assumed it must be a software problem.
The latest windows 10 update caused my computer to no longer recognize my second hard drive. How to get my drive It doesn't show up in disk management either.
View 1 RepliesI have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
Windows keeps putting my Canon printer in device manager under the disk drive. Also puts the printer under printers which is correct. Everytime I uninstall it from under the disk drive location.
It puts it back after a reboot. Also get dump files error on usb port, which the printer uses. Printer works fine, but it should not be put under the disk drive in device manager. only way to stop it, is to turn printer off, before I reboot.
