Gaming :: Steam Updates / Verifies Install And Then Closes - Fails To Launch
Sep 11, 2015
I can get Steam to launch, but only after having the PC be in sleep mode. I can't get Steam to start with Windows 10 either. I've uninstalled, reinstalled, deleted the blob files and various other things several times. No clue what the issue is.
View 7 Replies
Similar Messages:
Aug 4, 2015
I installed Windows 10 on my Lenovo Thinkpad Tablet 8. Recently I can't launch Windows Store. It will show the splash screen and then quickly close.
View 2 Replies
Dec 1, 2015
I am running a fully updated Windows 10 Pro Eng. Build 10586.
I go to the start menu, click on settings and when I click on the Update & Security button the window just vanishes !
I have restarted and tried several times to no avail.
View 9 Replies
Sep 1, 2015
I guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
View 9 Replies
Jan 3, 2016
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 Replies
Nov 13, 2015
I attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 Replies
Aug 14, 2015
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
View 1 Replies
Aug 15, 2015
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 Replies
Dec 18, 2015
At one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:
Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition
I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.
View 5 Replies
Dec 14, 2015
When I attempted to start up a new laptop to install genuine Windows 10, (downloaded from Microsoft website), via USB I received the error message,
"Your PC ran into a problem and needs to restart. We'll restart for you".
Error message also said ... "Attempted write to read only memory (WimFsf.sys)".
The laptop attempted to start several times but the same message was seen.
The new laptop is an ASUS X554LJ-XX025D, free dos.
View 9 Replies
Oct 15, 2015
I have a laptop that I took the HDD out of and connected it to another Windows 10 machine.
I ran the command
Dism /Image:e: /Cleanup-Image /RestoreHealth
But get the error
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Error: 87
The cleanup-image option is unknown.
For more information, refer to by running DISM.exe /?.
The DISM log file can be found at C:WindowsLogsDISMdism.log
View 1 Replies
Aug 4, 2015
I am trying to install iTunes 12.2.1 on Windows 10 Pro. During installation I get two errors, I believe they are connected. I am running this as Administrator from a User account. I have also tried running it with Windows 7 compatibility checked, same result.
This is the first error:
The installation continues for a little bit, then it throws this error:
At this point the installation fails.
My brother is in an identical situation; both of us have identical machines, upgraded from Windows 7 (where iTunes worked) to Windows 10, did a system refresh, and encountered this problem. Installing either version 11 or 10.7 do not throw either of these errors, however upon launch, it said it was not installed properly and would need to be reinstalled.
View 1 Replies
Dec 5, 2015
I have a HP desktop with W-7 that the HD is failing. (Almost failed)
I can't do a clone or a system image.
I installed a new HD and booted from my latest USB Upgrade from the Windows Media Creation tool.
I skipped the activation as it installed.
Now when I use the original product key, it fails to activate.
View 8 Replies
Jul 1, 2015
I have recently been trying to update an old hp laptop running windows 7. The 10130 update is showing ready to download, it downloads and tried to install but repeatedly fails at around 70-80% each time. It gives an error code of 800703f1 each time.
I have tried disabling all security features and firewalls etc. The laptop will not let me restore or reset to factory settings. I am not able to download the bios file as i have no flash drive to put it onto.
View 1 Replies
Aug 13, 2015
I'm a student and my university has a subscription to Dreamspark, so I got a Win10 key, along with an ISO-file from there. I'm using a Lenovo G700 and trying to perform a clean install from a bootable USB-stick.
I have tried creating this USB-stick with the "Win7 USB DVD Download Tool", using different guides from the internet with NTFS and Fat32 filesystem, launching the setup normally and through UEFI, using the "Media Creation Tool" ([URL]) to create the USB-stick directly and downloading the ISO file first and creating a bootable USB-stick from that with all the methods above, but no matter which of these methods I use, I get the following error during installation:
"A media driver your computer needs is missing." (URL)
Unfortunatley, I am currently running Win7 Pro x64 on my laptop and the following page says, that the upgrade to Win10 only works from Win8.1, not Win7: [URL]
When I try to use the "Media Creation Tool" to instantly perform an upgrade, I get the following error:
"Something happened... 0x80070422 - 0x90016"
What drivers could the installation possibly be missing? I don't have any external devices plugged in, except for the bootable USB-stick, of course. I tried downloading all drivers for Win7 x64 and Win10 x64 from the Lenovo page ([URL])
View 1 Replies
Oct 16, 2015
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
View 9 Replies
Jan 5, 2016
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
View 9 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Aug 11, 2015
I wanted to clarify whether updates that require a restart to install, only install if you actually click 'restart' or do they install if you normally shutdown the computer and then turn it on again later?
I'm sure you could do it that way on Windows 7. Its difficult having to restart my laptop every time, I'd rather shut down normally at the end of the day once i'm done with it and then following day upon booting up, updates install.
View 8 Replies
Oct 14, 2015
When I open my Windows Update, the Upgrade to Windows 10 is there ready for me to download. It has a button saying "Get Started". I checked to see what available updates are ready for me and it shows I have about 8 Windows 7 updates to be installed. How do I get around the Upgrade to Windows 10 in order to only install the Windows 7 updates? I am presently holding off in the installation of Windows 10, but I do want to continue updating my Windows 7.
View 4 Replies
Oct 10, 2015
I have reported it (and others) on the Nvidia forums. Doesn't seem to happen for light gaming for 5 minutes or so (and of course won't happen after playing solitaire) but after heavy gaming (Battlefield Hardline, the free Star Wars beta) for 30 minutes or so, after exiting most of the start menu is often blank. Takes a reboot to get it back.
I do not believe it's corruption issues on my OS or hardware issues. Things I've done:
1) SFC/scannow no issues
2) Ran this "Get-appxpackage -all *shellexperience* -packagetype bundle |% {add-appxpackage -register -disabledevelopmentmode ($_.installlocation + "appxmetadataappxbundlemanifest.xml")} to reregister icons.
3) Did a rebuild of the icon cache
4) Did extensive memory tests - all passed.
5) Turned off "game mode" in Antivirus
View 9 Replies
Dec 28, 2015
I know nothing about computers other than how to get games on steam. WMI provider host is using 10-100% of my cpu. Can i just disable it, or do i need it for something? I end process, it starts again, people saying it might have something to do with CimWin32
View 1 Replies
Aug 20, 2015
I've recently upgraded to Windows 10 via USB (using the download from the microsoft website onto USB and upgraded all my computers). All went well and smoothly, but unfortunately, when I went to start up Dota 2, my screens went black (as normal) but didnt load up the game. It seemed like it just crashes before it even loads anything. I thought that it was a bit weird, so i tried launching Garry's Mod, that did the same thing. I tried Warframe, as that opens a window before you enter the game, but that worked.
Not sure whats going on, heres my PC specs.
CPU - Intel i5 4570
GPU - GTX 780 Gigabyte
3 1080p monitors
Motherboard - Z87 Gigabyte (z87m-D3HP to be exact)
View 1 Replies
Jan 1, 2016
My mic is so quiet on steam and skype, starting from a couple of days ago, up until then my mic was perfect. I have checked many forms and youtube videos with no success.
View 1 Replies
May 12, 2015
I had a question about windows 10 and the Xbox one. I heard you could steam Xbox one game's from the X1 to the PC. I was wondering could you steam Xbox one games from the PC ( using PC hardware ) and steam it to the X1 ??
View 1 Replies
Oct 12, 2015
Is there any way to Uninstall Xbox app & Live Gaming from Win10? When I try to install/run game 'Halo2' on Win10 its refuses saying there is already a Live Gaming account running (Halo2 uses Live Gaming itself). I suspect the Xbox app (which also uses Live Gaming) is to blame for this. As I don't use or need the Xbox app can it be removed?
View 1 Replies