I've been hearing about this issue for people with Nvidia GPUs. The driver cannot be installed, and it says that there is no compatible hardware. My GPU is a GTX 960. What should I do to get the driver installed on Windows 10?
View 1 RepliesJust upgraded but now my second monitor isn't working and when i go to update my driver i get this
View 8 RepliesI was trying to install a driver to see if the performance would increase. It crashed my system. Also, a crash occurred yesterday and the day before yesterday.
JESSE-PC-Fri_01_22_2016_224559_47.zip
i have got an upgrade of window 10 2 days back...i have installed it but wireless driver is not installing on my laptop as i have tried it many times....i have installed driver tool kit but it needs internet as i can not connect to any W-network because of driver incompatibility.
View 1 RepliesDell WLAN bluetooth driver is not installing on my laptop . I found out that the same driver is working fine on my friend's laptop and i even used same driver for windows 8.1 previously.While I install it ,it shows an error that "The installer cannot run on this platform...",,I even tried refreshing my laptop but still it didnot work..
View 19 RepliesI upgraded to windows 10 a day or so after it was released and now when I go to plug in my laptop to tv via hdmi or when I plug in an old xbox360 wired controller it keeps telling me that it found the updates for the drivers but encountered an error while attempting to install them. It doesn't give me an error code for this. Also when I check the updated center is says it could not install updates and gives me an error: Error 0x8000ffff.
View 10 RepliesI am using Windows 10 in Microsoft Surface Pro 4 tablet. I installed Fresco Logic Thin2000 USB display driver in Windows 10. After the reboot windows 10 started crashing. I did boot in safe mode but safe mode is preventing me from uninstalling it.
What do I do? this was installed so that I could connect device to projector. In safe mode I am unable to remove it and windows 10 is not booting in normal mode. It showing error system_service_exception(Ddkmd.sys) at boot.
Using windows update I was installing the MS Drawing Driver and my keyboard flashed (blue lights) and the next thing a BSOD. I have attached the collected files, how to confirm the MS Drawing Driver is responsible.
View 4 RepliesI have an Asus Maximus VI Hero and am trying to download drivers after my clean install of Windows 10. I downloaded the file for my boards audio driver from the asus website but when I ran it the program kept saying it needed to uninstall the previous driver before installing the new one and then restart. It kept restarting and doing that over and over again never actually installing the new driver.
View 1 RepliesI've just bought my first SSD and want to install windows 10 onto it. I used the media creation tool to install the OS onto a bootable USB but when I try to install the software onto my SSD I get an error. It reads:
"A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD or USB flash drive with the driver on it, please insert it now."
I have tried hooking up my optical drive and inserting the disks that came with the motherboard and graphics card but it says it can't find any drivers. I'll attach an image below of the problem I'm facing.
Windows 10 keeps installing the ASUS Smart Gesture touchpad driver on my laptop. The driver is garbage and it runs three memory resident processes, which seems rather excessive for a touchpad driver. The default Windows touchpad driver works perfectly well, so I want to use that instead of the ASUS driver. However, if I uninstall the ASUS driver Windows Update quickly reinstalls it.
I disabled automatic driver installation when I installed Windows 10, as you can see here:
Despite that Windows update keeps installing the ASUS Smart Gesture driver.
how I can make it stop?
Windows 10 Pro and I am having an issue with my Touchpad driver, it seems to want to mess up and not move to where I need it to go, so I uninstalled it from the Programs and Features menu, but my issue is it keeps popping back up in Windows Update and installing on its own, I don't want the driver for it as it doesn't function correctly with it installed it works great when its not installed so how can I hide it
View 1 RepliesThis is my setup:
PC: Alienware Area 51 R2 with a GeForce GTX 980 NVIDIA 10DE-13C0
Monitor: Samsung 4k TV 48JU6700
Only the HDMI1 port on this TV supports HDMI 2.0. I have a good quality IBRA 6ft HDMI 2.0 cable that I'm using. If I try to boot into Windows 10 while I'm plugged into the HDMI 1 port, the screen stays black and doesn't even boot properly. If I press the power button on the PC it instantly shuts off and if I try to move the HDMI cable to a different port nothing happens.However, if I plug into the HDMI2 port which doesn't support HDMI 2.0, the computer boots fine and I can get into Windows, however the mouse jumps around, the text is weird colors and not very sharp on webpages, and images aren't great.
I updated the BIOS, I have all the latest updates for other hardware, including GeForce Experience. I also followed all the instruction on setting up the TV to use as a 4k monitor.
I have been experiencing problems with Windows 10 ever since I've installed a new graphics card: the MSI Nvidia GeForce GTX 750 Ti. It worked well the very first time. But rebooting gives me a blank screen. I have been able to enter the system once (by clicking the spacebar and entering my password blindly but that does not seem to work anymore) to try and update the driver that came with it.
I wasn't able to as I first needed to uninstall the previous one, which required a reboot. I was also able to check under Device Manager / Display Adapters to disable the shared Intel Monitor and enable the GeForce card. As confirming these new settings also required a reboot, I decided rebooting was probably the best option. I should have known better. I'm back to my blank screen and nothing seems to work. I have tried F2, F8, F10, F12, Windows + P + down arrow twice, spacebar, and Ctrl.
How to reboot and enter the system? And what to do next?
After installing windows 10 i noticed the resolution was a bit low, so i tried to change it, but it was locked and 1024x768. I then opened my device manager to see that both of my GPU's was giving error code 43 and was disabled. I searched the net for solutions, found something that said i should do a complete uninstallation of my GPU driver, i did that, and it still didn't work. I removed my secondary GPU and tried again, and still nothing.. I am running out of options...
View 1 RepliesI have a PC running Windows 7 Pro. I ran the 'Get Windows 10' app and it reported that it was not possible to upgrade because my graphics card (Geforce 7300LE) was not supported. I bought a new graphics card (Geforce GT610) and re-ran the app.
Despite the removal and replacement of the old card, the app still says I can't upgrade because the old card is unsupported. It appears that it hasn't detected the change. Is there any way to make the app 'forget' the original card? As far as I can see in device manager the driver for the old card has gone so what is the app looking at?
NVIDIA driver update for NVIDIA GeForce GT 620 fails to update in Windows 10 - Error 0x80070002 - After upgrading, I lost my 2nd monitor.
View 2 RepliesI just noticed that in device manager Microsoft Basic Driver Adapter is enabled not my NVIDIA Geforce 6200 TC. Is there anyway to get it back or do I have to wait for an update? Or should I revert back to Windows 7 and go to Windows 10 when its ready.
View 1 RepliesI keep getting these two error
i) Driver IRQL NOT_LESS_OR_EQUAL error
ii) Driver_Power_State_Error
It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do.
I just put a new RAM, 2GB, on my computer, and when I turned it on, it worked nice for about 3 minutes. Then it suddenly froze compltely with nothing responding. First Firefox, then My Computer window, then everything, all this in about 10s. After another 20s, blue screen showing "critical process died" showed up. I managed to see that out of 4GB that I now had, 3,25 were usable (I thought W10 x32 supports 4GB?). I am uploading a report. I am almost aboslutely certain that this had something to do with the new RAM since before that it worked just fine, and now fine again after I removed the new one.
View 3 RepliesI've been planning on swapping out my motherboard for a new one. I've looked around and it has come to my attention that i would need to reinstall my Operating System. But it wasn't mine and i no longer have contact with the friend that let me use it. my question is, do I need the Disk that i used to install it? or any sort of key? and if so, are there any alternatives to get it cheaper? (my os is windows 10 and i used to have windows 7 before i upgraded)
View 1 Replies"What this error means is, your Windows 10 installation folder is unfinished and/or corrupted. Now, how do you fix that?
1. Go into "C:WindowsSoftwareDistributionDownload" and delete everything in that folder.
2. Now, run the command prompt as an administrator. Type in "wuauclt.exe /updatenow".
3. Go to your Control Panel > Windows Update and your Windows 10 should start re-downloading from scratch, hopefully without flaws this time.
I followed the steps exactly, twice and it still doesnt work.On another site they told me to go to URL... and download a program. Whenever i run the program it simply says "Something Happened" and closes.
After I installed TH2 on Thursday I decided to run a SFC check to see if I had errors and it came up with some that it said it couldn't correct. The assembly look at the attached file and tell me what I need to do.
Attached Files : CBS.zip 161.41KB
Is it at all possible to take the OS, already installed, from your PC and put it onto a USB? I plan on getting Windows 10, but want to be able to revert to Windows 7 if I don't like it. (I don't have the computers disks, as it was a hand-me-down birthday present from my older sister.)
View 1 RepliesWhen I installed windows 10 I lost all sound on my computer. How can I get that back?
View 2 RepliesInstalling Windows 7 to my new SSD and keep my HDD for storage. Now, I want to upgrade to Windows 10, I like the look of it and feel that it has a lot to offer to me. If I install Windows 10, and then do the install again from a CD or USB onto my SSD will this affect my HDD at all (that does not have Windows on it)?
View 1 Replies