Graphic Cards :: Safely Remove Hardware And Eject Media
Feb 10, 2016
My taskbar shows that I can "Safely Remove Hardware and Eject Media". I don't have anything plugged in. Selecting the message tells me that I can "Eject Nvidia GTX 970". Wouldn't that be odd? It's the friggin' video card! I'm partly ready to select that option, just to see what the computer would do. Oh, that's right: without a video card, I wouldn't be able to see what the computer is doing..Why does Windows 10 think that my PCIe card, the only one that's been in this machine, the one that's been there BEFORE W10 came along, why does W10 want to eject my card?
There is no icon in the hidden icons area in Windows 10 that allows one to safely eject an SD drive. I have an SD drive inserted in my computer and have uploaded the files I want to upload and now I want to remove the SD card without corrupting or destroying the files on it. How does one do this safely?
I just received my MSI laptop with Windows 10 and I'm still feeling around on how to use the new OS (upgraded from Windows 7). I plugged in my ext. HDD and something popped up asking something along the lines of "What do you want to do with this?". I was like "Okay, everything's going fine so far."
The problem came when I wanted to eject my HDD though. I couldn't find the icon in the little notifications area with the arrow. I couldn't eject the HDD from "This PC" either. In the end, I just unplugged it, since there wasn't anything too important on it.
I've tried enabling "Quick Removal" in the device manager, but that checkbox doesn't even show up. Instead, it's replaced with the "Write-caching policy" options. I've also tried turning the notifications on in the taskbar, but that doesn't work either. I turned on task manager, safely eject..., and location, but none of them show up. I've restarted my computer as well.
I have set my external hard drives to performance mode, and recognize the warning that I won't be able to simply unplug them. Basically, I have to use the little green safely remove hardware icon. Nothing new. In Windows 10 however, when an external drive is attached, and I go to eject it using the safely remove hardware, they are always grayed out and I'm unable to do so. Is there another setting I need to do, or is Windows 10 saying that even with the performance boxes checked, I can still remove drives without "safely removing them."
So I recently had to reinstall Windows 10 to resolve an issue I was having, so my Nvidia drivers were deleted in that process. When I went to turn my computer back on after i was finished, there was no display on the screen so I took out my GPU and plugged the VGA into the integrated graphics and it worked fine. This just made me think I have to install the Nvidia drivers again but then I found out that you need the GPU in your computer to install the drivers, but My display won't work anymore with the GPU inside and no drivers for it.
In NVIDIA Control Panel, when I select my settings and click apply every things is OK. The next time I reboot they change. Why are they not being saved?
I upgrade my Win7 Pro to Win10 Pro last night and lost my 3840x2160x30 setup, being reduced back to 1980x1200. I've since done a clean install and reinstalled the latest drivers for my Samsung U28D590D and My ATI Radeon HD 5770.Nothing i have done has given me back my 4K resolution.
I am cleaning out and setting up an old-ish PC and whenever I connect it to my TV or Monitor it says either "No Input to TV" or it is just black when I turn it on, I am using VGA to connect it, I tried with a GTX 650 and with just the built in graphics, and still no luck, any reason why?
In October I bought the MSI GTX 980 graphics card as an upgrade for my Radeon R9 280x. I presumed that I would be getting a lot better performance in games since the 980 is a much more powerful card, this was the case in some games like GTA 5 where I can run the game at much higher settings. However I have found that in a lot of other games my performance seems to have gone down, as an example I will use Borderlands 2 as I have been playing this a lot recently.
Using my old card I was getting pretty much a constant 90+FPS when playing Borderlands 2 but with my current card I am currently getting less than 60 at most times and during combat it can drop to 20's. This doesn't make any sense to me as I have not changed any other hardware other than the graphics card and somehow It is performing worse than my old card.
I understand that the CPU is one of the biggest FPS factors and know that an upgrade to that would be needed for a lot higher FPS but surely an upgrade shouldn't cause an FPS decrease.
So I read about setting display to Extend I've tried updating the graphics card, looks ok and Device Mgr sez it's working The external display, a TV, worked before on Win 7 just fine!
this is: Win 10 64 bit Home was Win 7 HP Pavilion dv7 laptop AMD Radeon HD 6300M Series video card external display: large TV via HDMI
I have created Eject "N", etc for each drive letter from G-Z and they all work. They will safely remove my external HDDs. I have also created a context menu entry for Safely Remove > and it has a string value for subcommands, none of which will show when hovered upon. I need to move all of my Eject entries under the Safely Remove in order to keep my context menu clutter free.how to do this?
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
whenever I try to install the AMD drivers either via running the installer or auto detect, in the end I'm getting a message saying files did not install and to check the log file. I've got an Asus r9 280x. Control panel says "microsoft basic display adapter" under display adapters.
I have an Asus Desktop. I plugged a working HDMI cord into my older Sony Bravia TV (Smart TV). I have a GTX 760 192 Bit NVIDIA graphics card. I went to the NVIDIA control panel, and it wont read the TV. I tried going through the windows 10 64 bit version of trying to find connected devices, and the TV shows up but as a media streaming device. It almost seems like the PC itself doesn't know it has an HDMI slot.
I have temporarily connected a 22 inch LCD tv monitor( until i get a new one) to pc via HDMI lead but i cannot get resolution set right.The recommended native makes the taskbar disappear of screen and the desktop icons are barely visible on left side of screen.
I have tried various resolution settings but all are no good apart from one which makes the desktop look like like a laptop screen.
I have reset Windows 10 and updated Intel Graphic Card drivers to the latest but still resolution cannot be set correctly for monitor and used a VGA lead aswell.
Is it because you need a proper pc monitor to have correct resolution ?
My computer is crashing every time I turn on my computer. It crashes after around 15 minute. After it crashes once, it crashes right away right before or after the welcome screen. Before it crashes, my screen fuzzes, sometimes it doesn't. I tried a lot of things by deleting my graphics driver completely using ddu program or something like that and reinstall only the display driver.
So I bought a new monitor, the MG279Q and tried plugging it in to my PC via displayport, the monitor comes with a DP->miniDP cable, (from GTX780 DP to monitors miniDP) and the monitor gives no signal. However the computer does recognize the monitor and for example gives the sound alarm for new device attached. I can also see the device describes as "Generic pnp monitor" and I can see it in the Windows's own control panel for monitor + the nvidia control panel (pics in the end). But it won't allow me to set the monitor to use..
I suspected that the cable might be broken so I tested it with my UX32LN (GeForce 840M) laptop which has a miniDP. I plugged it to the monitor (from laptops miniDP to monitors normal DP, the monitor has both DP and mDP) and wow, image straight away. So the cable should be fine I guess.. But this is somewhat of an different situation as I use different port in the monitor compared to my desktops GTX780. And I don't have other computers or gadgets that I could use to test the monitors miniDP port.
Next I plugged in the monitor via HDMI to my desktop and that worked just fine. It recognizes the monitor without problems. Using my old XL2411Z monitor with DVI + MG279Q with DP or the MG279Q with HDMI+DP at the same time I can see the MG279Q being connected twice but it only chooses the HDMI connection and doesn't let me change it to DP even though it shows the connection.
Here are some pics to explain it better:
Multiple panel settings window. It shows the MG279Q on the top (under GTX780 the one not clicked) but it won't let me click it to use. Sometimes it lets me tick it for a second but instantly ticks the box off. The monitor nro 2 is the MG279Q via HDMI.
Surround+PhysX window shows that I've connected the monitor via DP but it is greyed out. It also won't let me make a surround set with the Xl2411z + mg279q DP.
Changing resolution settings only displays the HDMI connected monitor.
So I tried uninstalling the Nvidia drivers + freshly installing them, did not work at all. Neither did uninstalling the generic pnp monitor so the computer would reinstall the displays drivers. I also freshly installed from Win7 Pro -> Win 10 Pro and no difference (was intended to do that later on anyway so I thought that I might check, my laptop is running Win10 and it's DP worked after all). I also went to BIOS and checked that iGPU is disabled + monitor setting is set to PCIE instead of auto, no use. I would also test the GTX780's DP on other desktop computer but I can't. Anyway I'm somewhat suspecting a software/hardware compatibility issue as the monitor is being recognized. Doubt the fact that the monitors miniDP or my graphics cards DP port is broken..
What should I do or try? I really want to run the monitor via DP so I can utilize the 144Hz refresh rate.
After upgrading to windows 10, I cant get max resolution on my satellite p55-A5312. there is no option after 1366 x 768. I have installed the latest drivers from Toshiba site and also via windows update. but still cant get hd resolution.
Since upgrading to Windows 10 I've experienced cxonstant screen flickering during gaming. I can only really describe it as a weird fluctuation of brightness, in horizontal lines, up and down my monitor. On Counter Strike it seems to have been somewhat solved through V-Sync but I'm trying to play other games and it is making them completely unplayable.
I have turned V-Sync on through the Nvidia Control Panel and it has done nothing. I've tried running games at various different graphical settings and it has not worked. I have also tried running my monitor and PC from different power sockets just in case the PSU is somehow interfering and it has done nothing.
I have also experimented with running my monitor at different hz but I only have the option to run at 60hz.
Since updating to Windows 10 I have a display settings issue. I set my display setting to 1920x1080 (recommended) apply and check 'keep settings'. When I shut down and restart the display has changed to 1366x768. Happens every time I restart.
ATI Mobility Radeon HD 4200 seriesAMD Radeon HD 6300M series
For one; the ATI Mobility card there are no drivers installed for this device. Ive been on the AMD website, where I downloaded an old legacy catalyst suite, built for windows vista/7. after that there are still no drivers installed for this card.
For the AMD Radeon; I'm getting a "Windows has stopped this device because it has reported problems. (Code 43)"
I'm starting to believe the problems for the 6300M card is coming from the 4200 card not having any drivers.
I've uninstalled and reinstalled the drivers for the 6300 card, and can only get the code 43 to go away if I disable and then re-enable it through the Device Manager. After a restart though, the problem persists.
Have a user with a Sony vaio laptop, 15" screen, 1920x1080. They also plug an HDMI cable into a 23" dell widescreen monitor for a second display. This 23" monitor is also 1920x1080. They are complaining that fonts on this second monitor are blurry. They tried to live with it a week but they said can it be made clear again like it was when they had Windows 7?
Are you familiar with the possibility of fonts being blurry only on one monitor if they are both set to the native?
I'm asking them to see if they change the font dpi to 100%, logoff and on if its any better. For whatever reason that seemed to work for my laptop (another Sony Vaio), but my concern is they will be disappointed at legibility on the laptop screen (it makes everything tiny).
