Graphics Card Isn't Detected At All
Aug 12, 2015
I recently updated to windows 10 from windows 8.1 and I have encountered lots of issues,
Firstly, my graphics card (GeForce gtx 760) isn't detected at all! Judging by the frame rate in the few games I can run, it seems to be just using the Intel built in graphics in my cpu. I can't open GeForce experience to update my driver.
Secondly, My computer is booting and running far slower than it was with windows 8.1 and a lot of programs won't open.
View 1 Replies
Similar Messages:
Feb 23, 2016
In October I bought the MSI GTX 980 graphics card as an upgrade for my Radeon R9 280x. I presumed that I would be getting a lot better performance in games since the 980 is a much more powerful card, this was the case in some games like GTA 5 where I can run the game at much higher settings. However I have found that in a lot of other games my performance seems to have gone down, as an example I will use Borderlands 2 as I have been playing this a lot recently.
Using my old card I was getting pretty much a constant 90+FPS when playing Borderlands 2 but with my current card I am currently getting less than 60 at most times and during combat it can drop to 20's. This doesn't make any sense to me as I have not changed any other hardware other than the graphics card and somehow It is performing worse than my old card.
I understand that the CPU is one of the biggest FPS factors and know that an upgrade to that would be needed for a lot higher FPS but surely an upgrade shouldn't cause an FPS decrease.
My system specs are listed below.
View 9 Replies
Nov 29, 2015
I was recently playing a game and realize my graphics card wasn't running as good as I would like. Realized i hadn't updated the drivers in sometime so I went ahead and did. After restarting my computer after the updates like it told me too, my screen was pushed in 1in. on both sides and 1/2in. on the top and bottom. Along with skype and steam not opening, even though I was on it right up until I restarted my computer.
View 1 Replies
Oct 23, 2015
I have an nvidia 860m graphics card (Lenovo Y50 Laptop with an i5 processor) and I cannot launch any games with it. I've uninstalled and re downloaded everything from the drivers to the games. My final conclusion is that something is wrong when my computer tries to use my graphics card, but I don't know how to fix it.
For when I launch Witcher 2, it says "Direct3D 9 device initialization error".For when I launch The Legend of Korra (game) it says "Error : Graphic::Startup() FAILED. No Graphic Memory".I looked at other threads, but I don't know how to reset a graphic card's BIOS.
View 1 Replies
Sep 9, 2015
I recently bought a reconditioned Desktop, (Hewlett Packard xw6400 workstation). It came with pre-installed Windows 7 premium and a Nvidia Quadro NVS 440 graphics card.
Once I had downloaded and installed all the available updates, I had the W10 icon in the taskbar. Fine!
But when I tried to install W10, a message told me that my version of Windows 7 was incompatible. I upgraded to Windows 7 professional and tried again. This time I was told that my graphics card was incompatible, so I changed it to a Nvidia GeForce GT610.
Following this I uninstalled the Windows 10 icon (KB3035583) completely from my machine. The following day the icon had re-appeared on my taskbar. When I tried again to download W10, I was again told my graphics card was incompatible, but although I had changed and discarded completely the offending graphic's card the W10 app was still seeing the Nvidia Quadro NVS 440 and not the GeForce GT610 which is now installed.
View 3 Replies
Jan 4, 2016
I just started using my custom built pc started on December 26th 2015 (built in 2015 summer) because I finally got my monitor. After downloading my drivers for my video card (gigabyte amd r9 280x), everything worked fine. After downloading some games from steam, I played games from steam for like 2 days until my computer started to crash constantly when I turn on my computer (it does not crash when the computer starts but it crashes few minute later after I get into my computer). It crashes at random times, when I open files, device manager, browsers, games and even when I don't do anything on it. When I get really lucky, I could actually play games for a while but it always ends up with a crash.
Sometimes it's a BSOD but 80% of the times its vertical stripes, sometimes blue, black and white, and other different colours. Today it crashed over 10 times... and I gave up with my computer until I found out about this website.
I used whocrashed program to find out why it was crashing.
On Mon 1/4/2016 5:08:21 AM GMT your computer crashed
crash dump file: C:WINDOWSMinidump10416-21125-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0x42003)
Bugcheck code: 0x100000EA (0xFFFFE0005A351840, 0x0, 0x0, 0x0)
Error: THREAD_STUCK_IN_DEVICE_DRIVER_M
[Code]....
Analysis above is one of my crashed event.
View 7 Replies
Jul 17, 2015
I am using the MSI X99s Gaming 7 motherboard with the GTX 980 video card.I am having trouble obtaining the correct driver for the GTX 980 and the msi motherboard.What I want is the best resolution. I need the video memory to show exactly 4GB in dxdiag but instead it shows as 20000MB which is obviously a windows glitch. I have the Nvidia control panel. It is showing 4GB of vram. However the dxdiag utility is not showing this correctly. So I guess there is still some problem with the driver.
- Since I have windows 10 I need the update for the driver but that driver I installed specifically made for windows 10, has given me very poor results since my resolution has dramatically changed. I have used the Nvidia software to search for the windows 10 driver and it has found it but the driver is not very well coded. I am using DVI-VGA connection not HDMI however it should not matter because they output the same resolution anyway. The only difference is that hdmi also includes HD sound.
So I use a VGA 15" monitor. It should not be that that's the problem because even I use my banq 2024HD monitor (4K) it still happens. Maybe GTX 980 is not made for windows 10. That's why the new drivers are realy badly made?
I can roll back the windows 10 driver to the windows 8.1 one that gives me the best resolution. I can change the resolution to high so that everything looks nice and clean and the text is nice clear and small and not TOO large.When I play a game, it says that the video card is not compatible. I do not have on-board graphics.
View 1 Replies
Jan 28, 2016
Today I noticed an eject media icon on my task bar, and when I click on it, it shows an option to eject my gtx 970 which is plugged into the motherboard, should I be worried and is there anything that can be done?
I am using windows 10 as my operating system, as well as the latest nvidia drivers.
View 1 Replies
Aug 6, 2015
I am having a scary situation with my wife's notebook (which keeps our family photos) after installing Windows 10.
Her notebook is an ASUS G53JQ-A1 and the installation went through fine, except for the graphics card. The logos on screen were enormous and the resolution could not be improved through the menus.
On the Device Manager, the GPU was not even listed. The notebook was running the on-board GPU, which explains the bad resolution. Anyways, I, then, proceeded to the NVIDIA website and downloaded the latest driver, already compatible with Windows 10: [URL] ....
After the installation was complete, I had a black screen after the short boot and Asus logo. No mouse cursor.
Since nothing happened, after 15 minutes I force-restarted the notebook, only to have it go to the same black screen again. This went on for 30 mins, so I tried to hit F8 with no results.
Then the Auto Repair kicked in, but none of the options (short of REMOVE EVERYTHING) have worked so far. I will list everithing I have tried so far:
1. Reset this PC --> Keep my files
2. Advanced Options --> System Restore
3. Advanced Options --> System Image Recovery
4. Advanced Options --> Startup Repair
5. Advanced Options --> Startup Settings (just goes back to the Auto Repair main menu after a boot)
6. Advanced Options --> Go Back to Previous Build
The command prompt does open fine, but I have no clue as to what should I do there.
My questions are:
1. How do I get out of this situation without formatting the PC?
2. Is it possible that there was a conflict between the GPU driver (and all the auto-update and performance software that come along with the driver)?
View 1 Replies
Aug 2, 2015
I've had a problem with windows 10 and my acer PC with an AMD chipset. I constantly have black horizontal lines flickering across my screen. It is worse when running games or Chrome.
I've had this problem before in Ubuntu when I tried using proprietary drivers instead of the default open source ones.
I didn't have this problem before I upgraded from windows 7 sp1.
It doesn't stop me using the PC but is rather annoying ^^.
I would attach a screenshot but I can't seem to get a line in a screenshot
PC: Acer aspire 7750g with internal SSD and HDD
Graphics hardware: AMD Radeon 6600M and 6700M graphics chipset.
Driver version: 15.20-150715a-184226E driver with CCC version 2015.0715.2138.37093
View 9 Replies
Dec 28, 2015
I have a windows 7 system that I want to upgrade to Win10. The advisor says that the old on-board graphics card (built into the mobo) is not compatible. I went out and purchased a new PCI-e card that is compatible but the advisor continues to say that I can't upgrade. There appears to be no way for me to disable the old graphics chip in the BIOS.
I also tried to re-run the advisor analysis tool via the command line as mentioned in this post: Solved Cannot update to Windows 10 due to old video card - Windows 10 Forums
But the advisor still says that I can't update due to the old card.
Can I still upgrade to windows 10? If so what should I do?
View 4 Replies
Oct 7, 2015
I have a PC running Windows 7 Pro. I ran the 'Get Windows 10' app and it reported that it was not possible to upgrade because my graphics card (Geforce 7300LE) was not supported. I bought a new graphics card (Geforce GT610) and re-ran the app.
Despite the removal and replacement of the old card, the app still says I can't upgrade because the old card is unsupported. It appears that it hasn't detected the change. Is there any way to make the app 'forget' the original card? As far as I can see in device manager the driver for the old card has gone so what is the app looking at?
View 1 Replies
Aug 5, 2015
I'm currently using an NVDIA GTX 780, however upon upgrading to Windows 10, it doesn't recognize my graphics card or second monitor. When I open Geforce Experience, for some reason it appears to open on the unrecognized monitor so I cant update the driver.
I downloaded the latest 780 driver from NVIDIA's site, only to be told that it's incompatible with my rig...
View 1 Replies
Aug 21, 2015
I am running windows 10, and have just upgraded from an Nvidia geforce gtx evga 670 2GB, to a Nvidia geforce gtx evga 980ti hybrid. But now my computer wont shut-down properly, what happens is I click shut-down and windows 10 shut-downs (black screen), but then my fans on the computer are still running. I can restart the computer fine it just won't shut-down properly, also nothing is showing up in event viewer for kernel-power.
My system specs:
Case: Thermaltake level 10GT
Motherboard: Asus sabertooth z77
PSU: Cosair 1200
GPU: Nvidia geforce gtx evga 980ti hybrid
CPU: Intel core i7 3770k ivy bridge
Sound card: Xonar D2X asus
SSD: 120GB corsair neutron ss
Hard-drive: 1TB
View 1 Replies
Sep 7, 2015
I just updated from Windows 7 to Windows 10. Here's my specs:
Alienware M15x - R1 Notebook
Nvidia GeForce 8600M GT
Intel Core2 Duo CPU T8100 @ 2.10GHz
(if you need more specs let me know)
So, I had problems going from Vista to windows 7 because of graphics drivers in the past, and I assume this is the same problem. What happened was I installed everything, came back and my screen was black, no cursor, with the laptop still on. I turned it off and turned it back on, and after the windows load-up it goes black again.
I tried using windows + p to project to a different monitor, but no luck. I tried a lot of different things that I won't bore you with.
Here's my guesses: My graphics driver is out of date, so once I get that up to date I think I might be good, but I'm not sure.
I'm currently on integrated graphics mode, which I think is working as well. I think the other setting is called external, but I'm not positive. I think when my battery is low and I start up my laptop, it switches to inegrated to conserve power, which is why I'm able to be on here right now.
I just downloaded & installed a driver for my graphics card from Geforce.com, and am gonna reboot, which is why I posted this now in case I can't make it back, lol. If you post though I'll be able to see it on my phone, but I might not be able to respond (I can't type sometimes - it closes my keyboard).
View 1 Replies
Aug 24, 2015
I have installed Windows10 on a Gateway FX530 desktop PC. All has gone well with one exception. The OS seems to recognize that there is a card reader attached, I can see them through Device manager. When I insert a SD card the system completely ignores the device and will not allow me to access it. I have tried to change the drivers, without success. This card reader worked just fine with Windows 7 Pro and there was no indication that they would not work with Windows 10 when I ran the upgrade test.
View 2 Replies
Oct 20, 2015
I have tried inserting my card into slot, I get message, connect a device and try again.it wont read the card.
View 1 Replies
Mar 13, 2016
I've noticed when monitoring the task manager my ram usage never goes over 7.3GB used, Ive purposely tried to make it use more but it seems to hit a ceiling at that point.
[URL] ....
I've now also noticed MSI Afterburner only detects 8GB.
Every bit of bench mark software detects 16GB
Bios detects 16GB
I am using slots A2 and B2 as per the ASUS user guide.
[URL] .....
CPU: Intel Core i7-4790K
Motherboard: Asus GRYPHON Z97
Memory: Corsair Vengeance Pro 16GB (2 x 8GB) DDR3-1866 Memory
Win 10. 64bit
View 1 Replies
Dec 5, 2015
i just finished my first build and it's working perfectly.I have installed Windows on my 250 GB SSD and i'm now looking at the file manager.In the BIOS my 2 TB HDD could get detected, but it does not appear now.
View 1 Replies
Nov 1, 2015
I just updated Windows8 to Windows10 and my dvd/cd device is not detected anymore. When I go in the BIOS I see the device, but in windows explorer, I don't see the dvd device at all.
View 10 Replies
Oct 29, 2015
I have a digital tv hooked up to my laptop via HDMI and windows 10 doesn't detect it. But when I go into AMD catalyst it sees it. What am I doing wrong?
View 1 Replies
Nov 27, 2015
The odd thing is I don't even use OneDrive except to automatically upload photos from my Android phone to my desktop; nothing has been detected on the phone.
I've run another full scan with Bitdefender and Malwarebytes Anti-Malware (free) without any further detection.
Was just wondering if there might be other steps I need to carryout to be sure nothing spreads?
View 9 Replies
Aug 28, 2015
I updated my computer to Windows 10 Pro just few hours ago. I experienced some problems with the video drivers, but I solved them by updating the driver through nVidia GeForce Experience.
Now I have problems with my audio driver (which I think it is VIA HD Audio). My computer does not recognize my external microphone, only the internal one (which is not of the best quality). I looked for the drivers in the ASUS website, but I have found only outdated drivers for Windows 8. Then I saw the "sticky thread" on tenforums in this section and I tried to download the driver, but I do not want to mess up everything else as the site says:
Audio drivers available for download from the Realtek website are general drivers for our audio ICs, and may not offer the customizations made by your system/motherboard manufacturer. To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
So I'd like to find a good driver for my own PC (which is an ASUS G75).
In addition to it, it seems I have installed VIA HD Audio Control Panel, but I cannot access it because no window is shown when I start it.
View 2 Replies
Feb 10, 2016
When I go up to my cabin, Windows always changes my time zone to Pacific. I'm in Mountain Time, and I actually go east to get to the cabin. I don't know if it's the IP address, or the WiFi network, or what, but it happens every time. If I go into Time settings and disable automatically detect timezone, I can set it back to mountain time. But if I re-enable auto-detect, it switches right back to Pacific.
View 1 Replies
Feb 23, 2016
I've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
View 1 Replies
Nov 11, 2015
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
View 9 Replies
