I am using hp pavilion 15 series P077tx laptop. Currently I am running windows 10 single language. Everything works just fine but when i turn off the laptop it wont shutdown the display goes off but the power led & the system led remains on. I have to hold the power key for 5sec to turn off my laptop every time.
View 1 RepliesMy Laptop will not sleep. It's an Acer Aspire 5250 Series Laptop. Below is the screenshot of the issues that I have ran and found from Command Prompt.
View 9 RepliesMy Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
I have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
View 1 RepliesSince upgrading to Windows 10 I can't send e-mails from my HP Pavilion 15 laptop (64 bit) but I do receive them on both outlook and live mail but this problem does not effect my dell desktop (32bit) is this a windows problem or my laptop
View 2 RepliesI have an hp pavilion dm4 laptop. i have installed windows 10 and using for last 10 months but after updating to latest build 11082 my finger print scanner is not detected in start up login but i can add fingers and delete fingers in windows hello section. this started only after latest build was installed prior to that i was able to work it out.
View 1 RepliesI updated my HP Pavilion laptop to Windows 10 last weekend. Ever since then, I've had a problem any time I'm typing. I can't seem to type for more than 5 seconds without a left click happening on its own (sometimes it's a right click, oddly), which usually either opens a menu, moves where in the document/webpage I'm typing, or stops my typing altogether.
For example, if I'm on an email website, and click New Mail or Reply and leave my cursor hovering over that button, after about five seconds of my typing, the button is clicked again. If I'm typing in a box (like I'm doing right now), I can keep the cursor hovering over the box and my cursor will click somewhere else in the box suddenly, or if I keep the cursor hovering over the outside of the page it'll click and suddenly I can't type anymore. If the cursor is hovering over something I've already typed, I'm suddenly typing back in that earlier text.
This happens when using both a wireless mouse or the touchpad. I typically have the touchpad turned off so I can use the wireless mouse, but have the same problem with the mouse off and its USB dongle not connected.
I also have a problem when using the touch pad that after I've typed for, again, about five seconds the touch pad is completely unresponsive. That's not as bad a problem, since I normally use the wireless mouse. But I'd like to get that fixed, too.
after upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 RepliesFrom time to time when powering down my Laptop (Dell Inspiron 17) , the two blue lights in front remain on & I need to take out the battery
I would like to know what is possibly causing this and how I can get it corrected
My HP notebook was working perfectly with windows 8.1. After upgrading to windows 10 it is not shutting down properly. Power and wireless buttons are still glowing and battery is also consuming. I need to press the power button at least for 4 seconds in order to shutdown completely .
View 2 RepliesI've a sony laptop cum tablet (ultra book) with intel core i7 processor. I updated to Windows 10 today (previous version Pro windows 8). The install was successful but after the install my start up screen started flickering. I shut down and restarted the laptop and now the opening screen is frozen at the log in page which says- 'fast access, face recognition'. The camera is also not working to recognize the face. I'm also not able to log in manually. (I used to have face recognition mode with pro windows 8)
The laptop is not shutting down any more and don't accept alt+cont+delete command.
How to uninstall My WiFi Router safely and completely from my laptop?
View 5 Repliesafter installing windows 10 (clean install) my laptop completely freezes, so far happend only while playing games. This is possibly related to nvidia gpu, because basicaly nothing else uses it. I dont get any error or bsod and nothing in the event log, it just hangs with the "bzzz" sound and i have to restart.
Games a tried playing are heroes of the storm and rocket league, got freezes playing both. Time it takes to freeze is random sometimes 10minutes and sometimes 3 hours.
Heres some HW info [URL].....
When I go to Start -> Power -> Shut down, it displays the "Shutting down..." window, then the screen goes black, but the laptop won't shut down completely. That is, the WiFi, Bluetooth and Power (light bulb) indicators are still on (and the battery indicator too if plugged), and I have to force (power button long press) the laptop to shut down. I can also shutdown the WiFi and Bluetooth devices using the keyboard at this stage (with FN button). And if I keep the laptop this way long enough (unplugged), my battery will be completely drained.
I recently disabled Hibernation (cmd admin -> powercfg/h off) so I suspected it to be the culprit. So I enabled hibernation again (cmd admin -> powercfg/h off) and my laptop was shutting down as it should. I then disabled hibernation again and the problem came back. I also figured it might be something to do with my power plan so I reset it (Power options -> Change plan settings -> Restore default settings for this plan),
I've just upgraded from Windows 8.1 to Windows 10. I have an HP Pavilion 15 Notebook PC. This happened twice: when I left my laptop and came back after an hour or so, the screen was black (as usually), but the laptop was completely unresponsive. I couldn't wake it up neither by moving/clicking my mouse nor by hitting any key on the keyboard (both external and embedded mice/keyboards). Furthermore, the LED of my laptop on/off h/w switch button was constantly on, instead of blinking.
View 7 RepliesI have been running windows 10 for a week or so with no trouble until yesterday. I use DriverToolkit to keep all my drivers up-to-date and installed properly. I ran a scan yesterday morning and it fixed 13 drivers with no error at the time. Shortly thereafter I received 4 BSODs each about two hours apart (and another one this morning) and when I click shut down I get to the shutting down screen and the circle of dots just spins forever -- never shuts down -- until I pull the plug.
The BSODs were the following (in this order):
IRQL_NOT_LESS_OR_EQUAL
KERNEL_SECURITY_CHECK_FAILURE
PAGE_FAULT_IN_NON_PAGED_AREA
SYSTEM_SERVICE_EXCEPTION
CRITICAL_STRUCTURE_CORRUPTION (this was this morning)
CPU: Intel 4790K (no OC)
MOBO: ASUS Z97-AR
RAM: 8gb DDR3 (2x4gb) - I think it's Patroit
Graphics: EVGA 8400GS
HDD: 2x 1TB in RAID0 (Intel RST)
I searched how to screenshot, and found the "alt + prntscr" method. I managed to take one screenshot. Every time I try now nothing happens. I have also tried just pressing prntscr.
View 1 RepliesI have a VAIO F Series VPCF217HG that I just upgraded to Windows 10 a few days ago. So far everything worked fine except one problem.
I have a perfect internet collection, as in I am still able to go on to websites and download/upload stuffs, but every time I try to use any of the Microsoft features, it keeps saying that I don;t have an internet connection. I cannot use Cortana or Windows update and a lot of other features. I tried to use the ""Use SSL 2.0""Use SSL 3.0""Use TSL 1.0""Use TSL 1.1""Use TSL 1.2"" fix but it did't work.
I thought it was because of my outdated Mcafee, so I uninstalled it but the problem still persists afterwards.
I recently upgraded to Windows 10 and found out that I am not able to print out all. When I was using Windows 8.1, I was able to print with ease. But now, it is unable to print.
I use a Lexmark 7600 Series printer.
After a series of updates, one of which must have been at issue, ALL of my conversion software applications now fail to /convert/ any files. The programs load properly but that is followed by various issues depending on the app.
Tipard will load, load video files, and start to convert... but immediately fail upon starting the conversion process.
Handbrake will load, but locks up on loading a file, any file, regardless of length, at the 20% mark.
MakeMKV won't load at all.
VLC randomly crashes, or refuses to play videos, music, or anything, after an undetermined amount of time.
My FTP software no longer loads its settings files and scripts.
And an annoyance, all of a sudden all my icons have little green check marks on them.
Windows 10 Professional x64
Version 1511
Build 10586.63
AMD FX 9590 X8 4.7
32 GB ram
Tipard Blu-Ray Converter Version 7.3.30. No message just an icon notice. See photo
handbrake 0.10.3.0 x64: Preset Export Failed. Unable to load in Presets. Please restart HandBrake No additional exception information available : upon startup. Added files freeze program at 20% mark
MakeMKV (What version, won't load at all)
Paint won't save any files anymore. See same photo
I'm using Win10 x64 and Intel 520 240GB SSD:
For my mobo, Asus P8Z77-V-Deluxe, I downloaded the official asus chipset drivers.
There is one for Win8.1 x64 and a Beta version for Win10.
The chipset driver for Win8.1 has installed the following:
1. under Device Manager> IDE ATA/ATAPI controller > Inter 7 series/C216 chipset Family SATA AHCI Controller
2. Version 12.8.0.1016 - Date 2013/08/01
If I install the Asus Win10 chipset driver, then instead of the Inel SATA controller, I'll end up having Standard SATA controller by Microsoft.
I'm currently using the Asus beta Win10 chipset driver, however I manually installed the Intel SATA controller which is officially supported on Win8.1 and is digitally signed.
I ran two SSD benchmark test with AS SSD (latest version).
With just the official Win8.1 chipset driver as mentioned above, I'm getting the following results:
With the Win10 beta chipset driver and the Standard SATA controller by Microsoft:
And here are the test results made by Intel SSD 520 Series Solid State Drive | Intel,SSD,520 Series,Solid State Drive,SSDSC2CW240A3,Benchmarks,Performance,Reviews,Olin Coles,Intel SSD 520 Series Solid State Drive SSDSC2CW240A3 Benchmark Performance Review by Olin Coles
Can spot the difference?
I am unable to print wirelessly with my Epson 545 Series printer. Works fine with old laptop Windows 7 but Win. 10 is having a problem.
View 1 RepliesI've got a notebook Pavilion DV6-3152SL with hardware AMD Phenom(tm) II N620 Dual-Core 64 bit, bios F29.
After upgrading from Windows 7 HP to Windows 10, I've got a big problem with the AMD graphic drivers, which are both now version 15.200.1062.1004. ATI Mobility Radeon HD 4200 Series seems to work fine, while AMD Mobility Radeon HD 5000 Series stopped working of an error code 43 and I'm unable to fix it. I've already tried these chances, but no one of them has succeded to solve the problem of my AMD Mobility Radeon HD 5000 Series:
- Updating the driver from the AMD website both installing it manually and utilizing AMD Catalyst Istall Manager;
- Withdrawing the HD 5000 to let Windows Update installing a new one;
- Updating through the software HP Support Assistant.
... But I can't fix it: driver update for AMD Mobility Radeon HD 5000 Series is impossible. And, in any case the configuration goes lost at reboot and my notebook goes on saying "No AMD graphics driver is installed, or the AMD driver is not functioning properly.
Will windows 10 download on a HP Pavilion ZV6000?
View 2 RepliesI have a HP Pavilion g6 laptop that was factory supplied with Windows 8 and uses UEFI. I have now done a clean install of Windows 10 - 1511. If I create a System Repair Disk (CD) the laptop will boot from it, and in the boot menu it shows as UEFI. If I create a Recovery Drive (USB) the laptop won't enter the boot menu, and so can't boot from it, but my non UEFI desktop will boot from it. If I use Macrium Reflect to create a recovery USB drive the laptop will boot from that OK. So it seems that Windows is creating the wrong type of drive.
View 4 RepliesNeed to undertake the above for my daughter's college course. Haven't a clue where to start and I am not particularly technical (understatement). Have found a lot stuff here about merits of FAT and exFat, but just need a working how to. Video will be involved at full 1080p so I suspect that the 4gb limit will be a hindrance (assuming 3 minutes per gb).
View 4 Replies