I have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?
I have tried to download and install Windows 10 quite a few times. It freezes at the point where it has completed 75% of the installation and I think it is just about to 'Restart' once again to go into the final 'Settings' phase. The only way to get out of this that I've found is to power the machine off and then back on again, the system tries to recover the installation and then the previous version of Windows is restored. The unknown error C1900101-40017 is reported in Windows Update on each occasion.
I have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
Trying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?
I get as far as the notice to sit back and relax and the computer will switch off and on. Then it switches off and does not come back. Why can I not get Windows 10?
Every time i try to upgrade to windows 10 i get an error:
Upgrade to Windows 10 Home
Installation date: 8/8/2015 4:42 AM
Installation status: Failed
Error details: Code C1900101
Any fix that actually works so i don't have to try 100 things. The only thing to note is i have two drives, one is an ssd which is where my current windows is installed and its path is E, not C, just wondering if that may be the problem.
Not much on the web about this failure. Some threads talk about disconnecting all USB and devices so you just have the core system...really? Should I call MS about this? I'm sure they are flooded with probs.
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
For the past few days I have been having the issue were an update keeps failing in windows 10 so every time it re downloads the update it tells me that my pc is going to restart in about 10 minutes regardless of what I am doing and this is about at least 3 times a dat and it is extremely annoying.
The update is a thing called "microsoft malicious software removal tool" and windows wont let me disable automatic restarts or automatic updates and i dont even need this "update" because its just a virus removal tool which I don't need but windows wont let me cancel the update.
I had windows 8.1 and got access to new build of Windows 10 it started to install but the laptop got shut down mid upgrade then on boot up went straight to a black screen saying "restoring your previous version on Windows" and it has been stuck there for 3 hours, I have tried to use F8 and F11 to try and get to system restore but nothing works,
So after a stressful day at school I got home anxiously waiting to get on my computer, only to find out that after a recent update my computer has completely stopped responding. Now in the first few hours of dealing with this problem I was able to access the Windows repair options, only to find out that all of them failed. I was unable to do a system restore, nor diagnose my computer or even nuke it.
Later on things eventually got worse because now I'm not even able to access the options to fix my computer anymore or even downgrade to Windows 8.1. All that pops up after my computer starts up is "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system.
The update creating this issue: Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140743).These are the steps of the loop:
1) My PC downloads this update automatically in the background. I have no option to stop my PC from downloading it. 2) I am forced to install this update. There is no option for me to shut down/restart without having to install the update. 3) During the restart, I get a notification that my PC was unable to complete the update and hence the changes are rolled back and the whole process starts again.
This thing has been going on for days, wasting my time and getting on my nerves.Why is Microsoft so dumb?
A) If at all my PC has downloaded an update, why don't they save it somewhere on my PC till the update process is successfully complete instead of downloading it again and again wasting my bandwidth? B) Why have they not given options to opt out of (downloading/installing) troublesome updates like this? C) Is there a solution to this issue?
I've been trying to install the newest W10 update, but I've been having some trouble. I've tried 2 times to update my computer but it restores back to my previous version of windows because the update failed.
I've checked Event Viewer and all that gave me was "error 0x8024200D" and nothing else that I saw that could work.
I'm running Windows 10 Pro on Version 10.0.10240 (Build 10240)
I need to get around the windows automatic update for my Lenovo T440s laptop. the update shows as failed several times in windows update. I never make it to any download screen. I am upgrading from 8.1 pro and all updates are installed.
This the first time am having an issues with the update center.the rest of updates from today (Office 16) were fine.Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.the only way to get rid of it (after 30 min) is to press the RESET button.
Tried sfc /scannow => CBS.Log
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete 2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components 2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
I have tried to update an older laptop to Windows10, three times, or roughly 8 gigs of data. In all three attempts it has failed and stopped at 32% of the installation; and in all three attempts Windows had to automatically roll back to Windows, in my case Windows7.
Searching for solutions, none of them work, one of those solutions is to disconnect all your peripherals and try again based on the error you see in the image. I only have one peripheral and I seriously doubt it would cause Windows10 not to update when I have the same device on another machine and the update to Windows10 worked successfully; although I disconnect the one peripheral and I was right, same problem, Windows10 failed to update ?
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
I recently upgrade from Windows 7 to Windows 10 ( Build 10240). I had my overclock settings at 4.4 GHz/1.172 CPU Vin (specs listed at the bottom). My computer had no issues prior to switching to Windows 10. However, my computer always crashes and gives me the "overclock settings have failed" error within the first 10 minutes. This seems to only happen during the first boot session of my computer.
After restarting, the computer seems to run fine with no problems. I've tried restarting with default CPU settings and my usual OC settings. My computer runs for several hours with no issues. The issue comes back after I've turned the computer off for a long period of time (~3-5 hours).
I think its a Windows 10 issue, but I'm not sure.
Specs OS: Windows 10 Pro 64-bit (Build 10240) Mobo: MSI Z87-G41 PC Mate CPU: i5-4690k RAM: Kingston HyperX 8 GB
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
