I currently dual boot win10 and win7, first time I have ever done a dual boot, and I am wondering if there is any way to hide drives in explorer to clean it up. it shows the system reserved drive and the windows drive for my other OS on both systems and I just want to clean it up, having 7 drives listed just looks cluttered
View 1 RepliesSo, currently, we're trying to dual-boot Windows 10 Technical Preview on a Toshiba laptop with Windows 8.1. We already got the partitioning set up and everything, but when trying to install, it says we can't install to a GBT partition, or something along the lines of that.
We went to try to install it the same way that you do for Windows 7 and everything else, but upon setting the disk drive to the boot device, it still loaded into Windows 8. After a little Google work, I found that Secure Boot must be turned off, and that the BIOS option has to be changed from UEFI to CSM. After doing that, we could boot into the Windows 10 disk. However, when trying to install it, it says "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
We would like to fix it, and I found a way to do so on a Microsoft forum, and that's as follows:
1. Boot up to installation DVD/CD.
2. Click install but don't follow through.
3. Press SHIFT-F10 to bring up console.
4. Type "diskpart"
5. Once inside diskpart type:
-> list disk (find the one you want to convert)
-> select disk 0 (select the one you want from the list)
-> convert mbr (should take a second or two)
-> quit
6. Continue with install
But I need to know if it will format the entire hard drive, as I'd prefer not to lose the data on the primary partition. If we can do it while only formatting the partition for Windows 10, that would be fine (as that's empty already anyway).
I installed Win 10 Enterprise Tech next to my main play of Win 8.1 Pro w/ WMC in a simplistic Dual Boot by slpitting my Intel X-25M 160GB SSD into two equal Partitions, C and D. I do realize that W10 is gonna be a bit rough around the edges and I've noticed that I( have the same Wallpaper fixed to both Start Screens no matter what I do to indivualize them. It would seem as if both Partitions are linked together, perhaps because I'm using only one (1) SSD to split the Partitions apart. Certainly not a biggie, but it's gotta be one of the damndest things I've seen on my Dell inspiron 1545 in some time. My guess is that this is a simple glitch of some sort.
View 6 RepliesI've dual booted win10 with 8.1, I decided to delete win10 and make a clean install of the latest build, I went to Disk management and I found many partition more than it was before installing win10 in the first place.
These partitions are for restoring, how to manage them? how can I know which are for win8? and which are for win10?
I used MicroTool partition manager to delete the extra partitions on an OS drive with win10 (leaving just the main C partition on the drive), and now the laptop will not recognize the SSD with the OS on it, and obviously cannot boot. I also tried using the bootable partition recovery tool from MicroTool, but restoring the partitions also does not work, it will only allow one of the two partitions to be restored.
View 9 RepliesIn my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).
If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.
I recently updated from Win7 to Win10. Initially when updating I was encountering an error, which I resolved by splitting my SSD into 2 partitions using CMD (I found this information through other posts).
Now the SSD is in 2 partitions, one being the boot partition (C) and the other system partition (Y). Is it possible that these 2 partitions can be merged together?
I would like to know how to dual boot my win 10 pc with osx as my secondary os. I need mac as I need to see important messages that I receive when I use my pc.
View 1 RepliesI have win10 64 installed on my SSD and win10 32 bit on a HD. The SSD is GPT partitioned and the HD MBR. I can boot from the Windows boot loader in the BIOS into 64 bit windows on the SSD and, by selecting the appropriate HD in the BIOS into the 32 bit windows in the HD. I cannot figure out how to get that boot menu (either gui of text based) that I have read about in the forums. Do I need to convert the HD to GPT as well. Do I need to change anything to get this to work?
View 9 RepliesI have Windows 10 and 8.1 dual booted but I’m having trouble removing 8.1. 10 is on a Seagate 2TB HDD, and 10 is on a Samsung 2TB HDD. Both are SATA and my motherboard is BIOS. As long as the Samsung (8.1) is drive 0 and is boot’s first choice, all is well. I get the option to select either OS, and either one can be made default.
In attempting to remove 8.1 I have tried several things like making the Seagate drive O, removing power from the Samsung, swapping boot choice, but always fail and I continually get, “an operating system wasn’t found” no matter the disk or boot sequence, except the one above.
Included are jpg’s of disk management while in Windows 10, both disk and volume views. How to decouple 8.1?
I attempted to set up a dual boot configuration using my existing Win 7 Pro on a Samsung SSD drive, and a clean install of Win 10 Pro on a fresh Kingston SSD drive. I created bootable Windows 10 installation USB, reset the UEFI Bios boot order and proceeded with the install. Win 10 installed, however it would not recognize the Win 7 Pro drive. I checked the UEFI Bios again, and the Samsung SSD was no longer shown in the "Fixed Boot Order Priorities". However, it was listed under "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings.
My motherboard is a MSI Z97 Gaming 5, with Click Bios 4 v1.9.
I must also mention, my Samsung SSD with Win 7 Pro was set up not with UEFI but Legacy boot. This was my first mobo with UEFI, so I made that mistake due to my ignorance.
I reformatted the Kingston Win 10 drive. Rebooted, but got error message that boot device not found. I rebooted and hit F11 to get back into Bios. A popup box gave me a listing of bootable devices and the Samsung SSD appeared. Selected it and it booted into Win 7 no problem. I went back into the Bios, but the Samsung SSD still not listed. I shut down the system, unplugged the Kingston SSD, rebooted, went back into Bios, and the Samsung returned.
I then shut down the system, connected the Kingston into a different SATA port, rebooted the system, went back to Bios, and the Kingston remains unlisted in the "Fixed Boot Order Priorities" as before, but shows up in "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings. Remember that the Kingston is just formatted, no op system installed on it.
I set up the Win 10 install on the Kingston SSD as a legacy drive too. Another question I will ask is can you have one operating system on a legacy drive and one on a UEFI drive in the same PC?
My dual boot configuration has 10 with classic shell and 7 pro. Classic shell has settings for taskbar which control opacity and color. My 7 just showed a nearly transparent taskbar so I went to 10 and changed classic shell taskbar settings to opaque then back to 7 and the taskbar was now opaque.
View 3 RepliesSo i currently have windows 10, build 10162, and i like the OS X, especially since i do video editing, and i love the workflow. The problem is, everything on my PC is optimized for windows, and some things wouldnt work on a mac, and i didnt want to spend the money on a mac. I know its possible to dualboot some OS's so i want to know if theres a way i can just add an OS to my current pc. I have an extra HDD that i could put it on. And i want to put Yosemite on it, and i also have an intel CPU, nvidia card, which i believe is necessary for a hackintosh.
View 1 RepliesI'm planning to download the iso, or whatever file it is from the Microsoft website, and install it using that. (I never got the taskbar notification,.how I can make a dual boot on my second hard drive using that download (another thread I made, I've gotten the hard drive working and want that to be my dual boot, not having two operating systems on one hard drive)
I would like Windows 10 on my second, completely wiped hard drive.Unless I'm able to use my Windows 7 disk to install it on the second hard drive, and use the Windows 10 download to upgrade it on that hard drive in particular?
I just installed windows 10 on my second ssd and I have win 7 on a different.
How do I get a screen at bootup so I can pick what os to start?
Now I have to go to bios and change boot order of drivers every time I want to boot into a different os. I get no boot screen where i can just select what to start.
On the bottom of windows 7 there is a icon to upgrade to windows 10. However, is there/will there be a way to upgrade to windows 10 and keep windows 7 in a dual boot configuration.
View 1 RepliesI've installed Win10 on secondary HDD and I kept my WIndows 7 on different HDD.How do I setup dual boot?Each time PC reboots its loading only windows 10 without any dual boot.I can change the boot order in my BIOS but it would be great if I can do it via dual boot
View 1 RepliesI'm using WIn 8.1 as my main OS, but I have the 10 Home preview (Build 10240) on a second hard drive and I'm dual-booting. But there's something strange happening:
- If i set WIndows 10 as the default OS, then the PC boots to the OS selection screen and gives me 30 seconds to pick which one I want to use
- But if I set 8.1 as the default, it boots directly into 8.1 and doesn't let me select the 10 preview.
I'd prefer to have 8.1 as the default, but I don't want to go into BIOS every time I want to switch between them.
I have Windows 7 and Windows 10 Enterprise Build 10240 set up in a dual boot configuration on the same hard drive. Windows 7 is the first partition on that drive and Windows 10 is the second. I have decided to keep Windows 10 as my main OS and want to remove Windows 7 and reclaim that space for the Windows 10 partition.
What is the easiest way to accomplish this without a complicated and long procedure? I have tried Easeus Partition Master 10.5, but am unable to format or delete this active partition. I tried to format and/or delete this through Windows 10 as well with no success.
I have Win 10 as the second of a dual boot with Vista. Each is on it's own hard drive. If I remove the Vista drive then win 10 won't boot as it is looking for winload.exe. Is there a way I can give it access to the winload.exe it is looking forand then uninstall Vista? If this cannot be done it isn't a big problem weaving Vista active, I just don't need it anymore.
View 1 RepliesI was running win 7 (64bit) pleasantly but decided to install Win10, did all the needed stuff for getting dual boot setup.Win10 booted fine, when selected from dual boot menu, but I have many issues on win10, Lenovo laptop is begging for mercy on win10 for many things, my android phone gets disconnected every few seconds if I use youtube, laptop becomes sluggish. USB3 will not install, which worked in win7 earlier.
Fed up with win10, even after disabling driver signature, making sure every driver is correct which I am installing, but this laptop hates win 10 as of now.Now if I choose to run win7, lappy reboots and thats a LOOP. my win7 installation is shown in Drive letter E: while windows 10 is shown in C: What would be the safest way of Re-installating win 7 on E: without loosing the following the crappy win 10 of c:/ dual mode option on win 7 +10
What I want is to run win7 setup which has SP1 integrated and still be able to boot in win10 if I needed later.I have activation keys for both provided by my office which is based on volume licensing.
I have a PC with win 10 x64 installed. It is a new PC with UEFI firmware and secure boot enabled, though I can disabled it very easily.
I want to installed Win 7 x86 (32bit) on a second hard drive and have it dual-boot config with the current Win 10. I know I have to disable secure boot for installing 32 bit, but Im concerned about the process of installing Win 7 AFTER the already installed Win 10.
How can I go about doing this without losing access to my Win 10? I need to install win 7 for compatibility reasons.
I am dual booting with Win7. I have not used 7 in a few months. I want to know if there is a way to delete and merge the partition that Win7 is on. Also I want to know how to get rid of the dual boot screen and just go with the reg Win10 boot screen.
View 5 Replies