High Memory Usage And Task Manager Fails To Display The Cause
Aug 5, 2015
Task manager says my PC uses 95-100% of its memory, with the process using the most called "system" at only 200MB out of 8GB, if I set it to display how much it's using in percentages, it says 40-60%.
I'm running Windows 10 Home 64bit, on a 4770k with an MSI MPower Max Z87 Board and 8GB out of a 16GB kit of Corsair Vengeance 1600MHz CL10 RAM (I need to RMA the other 8GB, it's broken), CPU overclocked to 4.0GHz, no memory overclock.
I'm wondering whether it's a software or hardware problem, and if it's the former, how can I fix it?
View 1 Replies
Similar Messages:
Dec 26, 2015
After being loyal to windows 7 for loooong time I have decided to upgrade to windows 10 and I did not regret it till few days ago.
My laptop goes crazy hot but Task Manager shows like none CPU usage while Speccy shows rather high CPU usage and temperature.
View 5 Replies
Feb 10, 2016
I have 4GB of DDR3 ram on my laptop. When I go into the task manager to check how much ram is being used, it says only 795MB and yet it also says that 94% is being used.
This is always the case, of course with varying numbers. The memory usage shown does not coordinate with the percentage, but the computer performance certainly correlates with the percentage.
When I check in cpu-z, it does confirm that the 4GB are all installed. What is going on here?
Updated with pics:
I missed the performance tab which does indeed show all of the correct total amount of ram being used. Now how do I find all of the individual processes and services using those resources?
View 9 Replies
Nov 11, 2015
From the moment I switch ON my desktop until switching OFF (working for 12 hours) the local system service host is always between 30% to 40% regarding CPU usage.Why? How to stop it?
This does not happen in my Microsoft Surface Pro machine. Both machines, desktop and Surface have the same software installed so it's hard to believe this CPU usage is software based.
View 5 Replies
Jan 2, 2016
I'm running a 64 bit Windows 10 laptop. On idle, the System process is showing a high memory usage of more than 150 MB, usually more than 200 MB. Using poolmon the pooltag SpDN showed up with a memory leak. It leads to the Intel Matrix Storage Manager driver, iaStorV.sys. How should I go about fixing the problem?
View 1 Replies
Aug 10, 2015
after upgrading to windows 10 my laptop fan always working fast when i checked this issue, i see runtime broker in task manager with high resourse usage when i click on end task, everything be normal... but runtime broker run itselft immediately ...i googled this issue but i couldn't find a useful solution.
View 4 Replies
Feb 10, 2016
After installing Windows 10, I have consistently been getting high memory and cpu usage by both the System and Service Host: Local System processes. Usually the usage keeps rising from 1GB to sometimes 8GB. I left my comp on while I was at the gym today and came home to it prompting me with a low memory available message. This must have shut down some processes because now my pc is running at 13% memory and 2% cpu. I have searched for this issue and found similar threads, but none of the solution work for me.
View 1 Replies
Apr 12, 2016
msconfig - disable all 3rd party software startups
View 2 Replies
Aug 12, 2015
I recently bought a new laptop which had Windows 8.1. After a week of having it I noticed my Disk Space near 100%. I heard this was a common problem so installed CCleaner and did disk space cleaner however none of it worked.
I then upgraded to Windows 10 as a friend said this solved the problem for him, however, since doing so either the disk space, Memory or CPU are high either one at a time or all together, regardless of what I am doing on the laptop.
The first week of having the laptop I don't believe this was a problem so I think it's something to do with an update as all games ran smoothly.
When I run a game or bring up firefox near the top is always 'system (ntoskrnl)' or a few 'service host (svchost)'. I dont believe its the games I play or firefox as like I said it was fine for the first week. It seems windows are running stuff behind the scenes.
I have done a few things that I have found on the internet but none have worked like; disable prefact and superfetch or whatever they are called. Still seeing increase in memory or disk usage whenever i load something and system or serice host are there at the top of performance or the game seems to use alot - however again the game never did this in the first week.
View 1 Replies
Feb 23, 2016
For a while I 'm having problems with locking while I surf the internet after five minutes browsing the facebook the browser begins to catch and is impossible to do anything , I noticed that this occurs when the system and compressed memory reaches 15% use the CPU when closing facebook use immediately falls to less than 1 % and the browser back to normal. I never had it before and started to happen with these recent updates.
before:
after:
View 6 Replies
Jan 9, 2016
When I am downloading something with utorrent the memory usage in task manager slowly creeps to 100% and makes my computer unusable and even if I shut down utorrent the memory usage does not change and I have to restart my PC. Same goes for browsing facebook or any other sites. Is there a solution to this? I really don't want to reinstall my system.
View 9 Replies
Sep 7, 2015
Here is my PC configuration :
Recently I am getting notification that my memory is low, close some application to free the memory. But I wasn't running any high memory consuming programs. Then I looked into my Task manager and got this :
I am really not sure why this is taking so much memory. This Service Host: Local System continuously taking more and more memory and it moves total memory upto 80% ....
This didn't happen before I am recently facing this problem. How I can stop this so that it doesn't take this unusual memory. I checked windows update but no update is pending.
View 1 Replies
Jul 4, 2015
I installed Windows 10 (10130 build) and I love it. The only problem that I'm having with it is this Photo Background app that eats my cpu(30-40%)! When I start up windows I need to kill it in task manager everytime. But even after I kill it if I leave my laptop in idle it still comes back. I want to understand what this Photos Background Task Host is doing, his functionality...
View 6 Replies
Feb 11, 2016
So, I want to make my gaming PC as effective as it can be. When the PC is idle (no programs running, except task manager), I have 36 background processes and 26 system processes, Ram usage is @ 22 %, like in the picture below, I have 8 GB 1866 MHz RAM...
I am wondering, is the RAM usage too high, or is it okay for Win 10 ?
I was thinking about uninstalling the Cortana app, because it eats around 35-40.000 K, but if I erase this, I wont be able to use windows search...
View 1 Replies
Mar 2, 2016
I have windows 10 64 bit, edition Windows 10 Pro, Version 1511, OS Build 10586.104
Processor : i5-4690k
Ram (installed) : 16gb
Video card : gtx 970 with 4gb vram.
Computer is slow at times lately. Memory Usage in task manager is constantly high when this occurs. Not many Operations are open and running. I am having fps drops while gaming as well that is annoying. Attached image of processes and percent of usage across cpu,memory, disk, and network currently ...
9:45 pm - Just tried to shutdown windows via task bar and windows cycle through shutting down, blink black scree, pc stayed on, windows popped back up. Hard shutup via pc case i/o button and windows still tried to cycle through shuttind down, blinking black screen, pc on still, and windows flicked back on and then shutoff completely.
View 1 Replies
Sep 11, 2015
I've calculated that my apps use arround 538MB(1%) ram i have 6GB ram and the task manager is showing almost constantly that around 35% is used. What windows processes can i stop to reduce the ram usage - these are pics from the task manager. URL...
View 1 Replies
Dec 18, 2015
For some reason iexplore.exe consumes extremely high cpu resources. Only IE and only cpu. I have done a myriad of scans:
Roguekiller
TDSSKiller
ESET
Malwarebytes
Bitdefender
and none indicate a Trojan or rootkit. I have also deactivated most extensions and followed dozens of articles on the net. I know I am supposed to use Edge, but it lacks features that I want and has other limitations that make it cumbersome. Likewise Chrome and other browsers react differently for many of the sites I use.
View 6 Replies
Nov 24, 2015
windows 10 pro x64
8 gb ram
my system monitor is showing 49% ram usage, and 52% swap usage.why all the swap usage, when there is plenty of ram left?Is this normal? The computer was in sleep. maybe that's connected?
View 1 Replies
Dec 6, 2015
I just recently installed Windows 10 on my Dell Inspiron Laptop and so far I am not impressed at all - in fact, I am very seriously debating one of two actions - re-install Windows 7 or switching to an entirely different OS.
The reason for reverting to Windows 7/switching OS are as follows:
1) Currently with an idle system (i.e. no applications running at all), an svchost process is using anywhere from 40 to 60% of my cpu. When I did a tasklist on this process the following processes are attached to this one pid: Appinfo, BITS, Browser, DsmSVC, IKEEXT, iphlpsvc, LanmanServer, lfsvc, ProfSvc, Schedule, SENS, ShellHWDetction, Themes, UserMananger, Winmgmt, wuauserv. My question is this - is it necessary for these processes to be run. If they are, then am I looking at only being able to use 50% of my processor (since this one pid is using the rest of it)?
2) For a virus scanner - I am using McAffee and under Windows 7, it took my laptop 24 hours to scan 231 GB of data. Since I switched to Windows 10 (Same hardware, same memory, etc) it now takes my virus scanner over 48 hours to scan 231 GB of data.
3) If I had not been poking around and trying to change my update settings, I would never have found out that Microsoft expects their users to update the windows of the other users (Microsoft calls it Dynamic Updates). Now this is all well and good if some one had said something since I would have loved to know about it sooner since I am on a metered service.
4) Some of the programs that comes with Windows 10, I have no use for but yet I can not un-install them (Cortana come to mind).
5) It appears that even though I have turned off "Live tiles" the tile continue to update from the net (again - it would have been nice to know since I am on a metered service).
The only option that I know of is to revert back to Windows 7 or switch to a new OS.
View 4 Replies
Feb 10, 2016
I'm getting a constant high disk usage without even having anything running. Here's a screenshot of my problem
And well, so far I've tried the ''deactivate 'windows search' and 'superfetch''' and it hasn't really done the trick.
Also I resetted my pc yesterday, as of now I'm running a clean install of Windows 10.
Did the ''turn off notifications from Windows'' and really nothing, I've also defrag quite some times with Defraggler and DiskDefrag and nothing.
View 4 Replies
Dec 23, 2015
Basically I noticed that my PC has a lot of RAM used but no program is using the RAM - see attached screenshots. Obviously it doesnt really affect me until I launch a game: eg GTA 5 which before ran happily at 60 and is now stuck on less than 1 FPS when I get into the game (even after spending like 20 minutes in lag hell to try to reduce all the settings to the lowest).
However Rainbow Six Siege runs at 120 FPS with no issues, so GTA may be an isolated incident.
(Also important to note I only have 8Gb of RAM, even though it says */16.0GB for the committed memory)
Specs are:
Computer type:
PC/DesktopOS:Windows 10CPU:Intel Core i5 3570k Motherboard:ASUSTek P8H61-M LE/USB3 Memory:8Gb(2x Corsair 4Gb 1600mhz Vengeance) DDR3 CMZ8GX3M2A1600C9 Graphics Card(s):NVIDIA GeForce GTX970 Sound Card:Onboard 7.1 Audio (Realtek)Hard Drives:1Tb ST1000DM003-9YN162 ATA Device
1Tb Hitachi HDE721010SLA330 ATA DevicePSU:XFX PRO850WCase:Zalman Z11Cooling:Corsair H60 Water Cooler
View 4 Replies
Apr 14, 2016
I have recently noticed a bit of a performance issue on my HP laptop running Windows 10 Home.
What happens is, if I am not doing anything on the laptop, but am not putting it to sleep (i.e. idling), it stays at a low CPU usage. However, after a while (usually about a minute?), the CPU usage rockets up, and also affects my CPU temperatures (goes up from ~35'C to ~50'C).
The processes that are the culprit, as defined by the detailed tab of Task manager, are either "svchost.exe" or "System" - the latter is described as "NT Kernel and System" and is linked to ntoskrnl.exe.
The laptop came preinstalled with Windows 10 and doesn't have many programs installed.
View 9 Replies
Oct 9, 2015
For some reason my Task manager is showing high cpu usage, and im lagging in some games. This is what it shows when I look into my task manager
[URL] ....
How to fix? It wasn't like this before.
View 1 Replies
Sep 5, 2015
i have recently installed win10 and after a few days i have noticed that it uses all my memory(8gb) in the following scenario:
i let the computer overnight watching a stream and an online radio station.the next morning i have noticed that the computer was a little bit laggy, ind i opened task manager where it showed 97% memory usage.The funny fact is if i added up alll the provcesses memory usage und it was about 1.2 gb ram
PC specs:
i7 - 4770k proc
gtx 970 video
8 gb hyperX red memory
View 3 Replies
Sep 26, 2015
So up until this morning my Windows 10 desktop has been performing really well. When the machine is idle the CPU use is only in the 1-3% range.
For some reason my idle CPU use is now CONSTANTLY 30-40% (even after a reboot)! Task manager says its "Service Host: Local System (15)". If I expand this process in task manager it lists:
Why is this happening all of a sudden? I have all Windows Updates installed and I run an i7-3770 CPU.
My machine is now slow/sluggish with 30-40% being hogged by these services!
I don't have any Malware installed as I run Malwarebytes Premium and the scan comes back clean. Some goes for a full anti virus scan.
View 9 Replies
Jan 25, 2016
Here is my laptop specification:
- HP Pavilion g4
- Intel Core i3 2.2 GHz
- Radeon 6470m (but somehow got 7400 driver and worked) plus Intel HD 3000
- Windows 10 of course
- 2 gigs ram
- And latest drivers, checked with Uniblue's driverscanner and link on other subforum stickies.
It's high memory usage of this process, it starts with ~7mb then grows up to ~200mb on heavy use. This happen with recently windows 10 update.
What I have done is, I do a restart every time I made these changes:
- SFC /scannow
- Update driver (again)
- Turn windows 10 tips off
- Try disable Superfetch
- Malwarebytes scan
- Disabling High Definition Audio driver drops the process usage to normal 28kb, but this somehow rise again to ~100mb.
View 3 Replies
