I had windows 8 and upgraded it to win 10 along the way. I have a recovery drive stashed away for the computer, but I can't remember if I made it for win 8 or 10. how I can tell which OS it is for?
View 1 Replies
Can I use the recovery drive I have for the first build or do I have to make a new one for this new build
View 2 RepliesUpgrade to Windows 10.
One peculiar thing we noticed is that different PC's demand different size for the USB Recvery disk after the upgrade. We had a range from 4GB to 32GB. A majority used 16GB.
What is the reason for this difference.
I have tried several times to create a system recovery drive on a USB.
Followed the instructions to the letter, and used two different brand, brand new USB's.
After initial start up it says I need a USB with at least 8 GB capacity, which these USB's have. But nothing happens, it just keeps asking for a USB after one has been inserted.
I have two identical HP Elite desktop 800 PC's one has Windows 10 installed. I also have a recovery drive canI use that recovery drive to install Windows 10 on the other PC?
View 9 RepliesI recently decided to upgrade to a bigger hard drive because my old ones were reeeeallly old and very small and slow. I soon realized the massive challenge I had undertaken because of the fact that I accidentally installed windows on both drives (1 windows, two drives, not 2 windows 2 drives). One of the drives just contained some install info and some recovery information, but windows wont boot without it.
My next step was to just make a recovery drive (my dvd/cd reader is super old and I doesn't work) on a free USB I had and run that so that it would copy all of the missing files over to the one drive after I unplugged the other one. Well here I am having done most of that but my Bios is really sure that I don't have a usb plugged in (I've tried all of the USB ports). I find this strange because I installed windows 7 on this computer with a USB (the same one actually).
I dont think my signature says it but my motherboard is a Gigabyte GA-P35-DS3L
I have recently updated to Version 1511 and thought I would try to create a recovery drive on a USB having been unsuccessful when trying in the earlier Windows 10. This time it seemed to be working with the system files box checked, though it seemed to take an age before the USB was required to be inserted. It said I would require a USB of 8GB minimum capacity so I used a 16GB size.
When it finished creating the drive ( I did not see the actual finish but no messages were left on screen) I noticed that the USB had only a little over 1 GB of information loaded.
I would probably find it useful if I could be told what files I should expect to find on the USB and the size of each. The files in my USB are titled: boot; efi; sources; bootmgr; bootmgr.efi and reagent. The sources file ( 1GB) is by far the largest.
I'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
Having recently upgraded to Windows 10 from Windows 7 I have tried to create a recovery drive to go on a USB flash drive. All I get, however, is the message " We can't create the recovery drive. A problem occurred while creating the recovery drive". I have tried a few times without success.
I looked at the Event Log and saw the following which, I believe, is related to the problem: Microsoft-Windows-CAP12. I.D.513.
Windows 10 only makes USB recovery drives. How do I make a DVD repair or recovery drive?
View 1 RepliesI have just installed the free windows 10 upgrade from Windows 7 home premium. I have used the file history program to create a USB and a DVD recovery disk prior to creating a system image ( not done yet ) I tried to test the recovery but it does not boot the system. The system just continues to boot the Win 10 update. I have changed the boot order by using advanced options to get into the bios. I have put USB key in position 1 and USB cd/dvd in position 2. my System is a Samsung lap top RC530 with Legacy Bios. How can I check my recovery disks USB and DVD. The system just continues to boot as normal. The recovery disks completed ok with no error messages when creating.
when I press esc after pressing the power button all I see is the choice of the 2 internal devices CD/DVD and HDD.
I have set all my usb devices in boot order above these two but the USB is shown as NA.
I am using 64 GB USB 3.0 drive. Note though my computer only has USB 2 ports no USB 3.
I have also used Media Creation tool to create a Windows 10 installation media. It still failed to recognise the drive as a boot device. The Lap top can read the USB drive ok though just not boot from it.
I am trying to create a system recovery drive on a usb stick using Create a recovery drive in Settings section.
But apparently I am missing many files such as winre.wim and install.wim as I keep getting error messages that I am missing files and instead am told to insert my Windows Installation dvd to get them. Since I have a Win10 Upgrade install from Win 7 Home Basic, I have no dvd install disk to either copy those files from or use as a rescue dvd, and I looked back at Win 7 files on another drive, and the .wim files are not in 7 either, as that was a Dell reinstall dvd (still have that), but no such files there either.
So can I get Mr. Gates home # in case I need to rescue my OS? My past behavior tells me I WILL need to rescue my pc sooner or later, & maybe this time I can be prepared.
I have a HP Pavilion g6 laptop that was factory supplied with Windows 8 and uses UEFI. I have now done a clean install of Windows 10 - 1511. If I create a System Repair Disk (CD) the laptop will boot from it, and in the boot menu it shows as UEFI. If I create a Recovery Drive (USB) the laptop won't enter the boot menu, and so can't boot from it, but my non UEFI desktop will boot from it. If I use Macrium Reflect to create a recovery USB drive the laptop will boot from that OK. So it seems that Windows is creating the wrong type of drive.
View 4 RepliesI have upgraded a Win 7 and a Win 8 computers to Win 10. On the Win 7 I used an 8 GB USB Drive for Recovery and it did not use all of the space. On the Win 8 computer I'm getting a message that I need a 32 GB drive. I understand that it may also be backing up my Win 8 information, but 32 GB seems way too much. I hate to waste money on a drive that is not needed.
View 6 RepliesAfter my Windows 10 upgrade was finished I created a "Recovery drive" on a 32 GB flash drive and it filled the drive to 26.8 GB. I just finished a clean install on my hard disk with all unallocated space and decided to make a new "recovery drive" on the old flash drive when I was finished. I did "check" to include system files and the process took quite a while but only 3.5 GB are now being used on the flash drive. Why such a difference in data this time than before? Is this drive okay?
View 1 RepliesI am completely wiping my hardrive with DBAN and doing a clean install of windows 10 with a dvd I created with the media creation tool. Will the fresh installation of windows come with a driver for ethernet cable so I can get on the internet.
I know I can get the drivers and put them on a usb to use after install, but I'm having trouble with malware on other computer and I don't want to transfer anything.It is windows 10 home on a 64 bit Toshiba Satellite C55-C5241 if that matters.
So my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
View 8 RepliesWhen I attempt to create a recovery drive, I get this message.
Recovery Drive
We can't create recovery drive
A problem occurred while creating a recovery drive.
What is the answer, as I have tried this several times.
It has been suggested that I should create a Recovery Drive from USB to enable me to reboot if I get problems.
However when I use "Recovery Drive" I get the following message "We cant create a Recovery Drive on this PC. Some files are missing.
To Troubleshoot when your PC cant start use your Windows installation disc or media" . As I upgraded from Windows 8.1 I don't have a disc & what is media?
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive".
Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
I have a Dell Venue 8 Pro with an upgraded Windows 10 installed. Always perform Windows Update but did not pay attention too closely. When the drive space was low and started looking a little bit closer, I found out that I have several Recovery Partitions. From Disk Management display, from left to right are the partitions:
500MB EFI | 40 MB OEM | 490 MB Recovery | C: OS 22.8 GB | 450 MB Recovery | 4.75 GB Recovery
The problem is I do not know which partition that Windows 10 actually created as its Recovery Partition. I do know that the 4.75 GB partition is my original Dell Venue 8 Pro Recovery Partition. Which one can I remove to allow the expansion of my C drive? What gives?
So I've completed the upgrade from 8.1 pro to Windows 10 pro. I want to do a clean install so I went to control panel to create a recovery drive. After clicking next through the first screen it appears to search for eligible drives to backup to (I'm just assuming here, and I do have a 32GB USB drive plugged in), then just gives up and says it can't do it. No explanation of what went wrong. So I guess no clean install for me..
View 6 RepliesI have a Sandisk Cruzer 64GB USB 2.0 thumb drive and I was wondering if it's possible to create 2 disk partitions and install some boot menu to allow me to choose either the Win10 ISO partition or Surface Book Recovery Image when I boot to USB in UEFI?
View 9 RepliesWhile trying to create a recovery dish I get message that an error occurred and unable to create a recovery disk. If I uncheck backup system files to recovery drive it,creates the drive. Not having the system files will I still be able to use it to boot my pc if I need to. Originally Windows 7.
HP Pavilion p2 PC
Intel Pentium Processor G62OT
1) the HD in my laptop was dying, so I ordered a replacement, and tried to create a recovery drive so that I could reinstall Win 10 when the replacement arrived
2) Windows asked me to use a drive of 16 gigs or larger for my recovery drive
3) since I didn't have any USB flash drives of that capacity, I used an old, 40-gig IDE drive (IBM Deskstar) that I connected to the laptop via the USB port; at the end of the process, Windows claimed that the IDE drive had been successfully formatted
4) the replacement HD arrived; I inserted it into the laptop and re-connected the IDE drive via USB
5) when I turned the machine on, it seemed to recognize that there was a drive plugged in at the USB port, but it did not seem to be reading the relevant information on the drive: I got a menu with several options for installing/re-installing Windows, but when I tried various options, the computer did not recognize any "source" from which Windows could be reinstalled.
What I should do? The IDE drive has many possible pin settings (master, slave, etc.), of which I have tried several so far -- which setting(s) should I be using so that the computer is able to properly read the drive?
