I have Windows 7 and Windows 10 Enterprise Build 10240 set up in a dual boot configuration on the same hard drive. Windows 7 is the first partition on that drive and Windows 10 is the second. I have decided to keep Windows 10 as my main OS and want to remove Windows 7 and reclaim that space for the Windows 10 partition.
What is the easiest way to accomplish this without a complicated and long procedure? I have tried Easeus Partition Master 10.5, but am unable to format or delete this active partition. I tried to format and/or delete this through Windows 10 as well with no success.
I am dual booting Windows 10 and Windows 8.1. Each operating system is on a separate physical solid state drive. My default is Windows 10. The Windows 10 OS was installed on the drive that originally contained Windows 7 when I dual booted Windows 7 and Windows 8.1. I don't have drive partitions to deal with as each operating system is on a separate physical drive.
Now I would like to remove the dual boot by removing Windows 8.1, leaving just Windows 10. That will leave me with an unused SDD.
When I am in Windows 10, the default OS, the msconfig Boot section shows Windows 10 as the default, as it should. To remove the dual boot, can I just Delete Windows 8.1 from the Boot section of msconfig and make the setting permanent?
My pc was installed with windows 10 dual boot with windows 7. After I removed windows 7 from harddisk somehow the dual boot options were not removed. I am still able to log into windows 10 but it is kind of disturbing. How should I completely remove the dual boot screen and log into win10 directly?
Windows 10 currently installedUEFI (Legacy/BIOS is supported but I do not prefer using it as it may cause more problems in the future)1 Hard Disk Drive
Goals: Install Windows 7 on another partitionMaintain my current Windows 10 installationNOT have to switch to Legacy/BIOS mode
I found this: Windows 10 - Dual Boot with Windows 7 or Windows 8 But it assumes a Windows 7 installation and subsequently dual booting Windows 10 on it. What I would like is essentially the opposite.
I want to upgrade to Windows 10 to see how it works but... I also want to keep my Windows 7 in case anything goes wrong. So, how can I dual boot Win 10 with Win 7? It can be done when upgrading or I must download an .ISO file and burn it on a DVD? And I will also need some instructions about dual booting. By the way, I already backed up my files on my external hard disk if anything goes wrong.
how to be able to install both Linux and Windows 10 on my laptop's hard drive?So that when I restart my laptop I will be able to choose from either Windows 10 or Linux?
I did that once with Windows 7, and I remember I had 2 possibilities: Either to be able to choose through a Linux prompt at the startup, or through a Windows prompt. I tried both options. (It was either doing it via a Microsoft boot manager or via Linux boot manager or something like that, I just can't remember)
Edit: I remember there was some sort of Linux boot manager if you install Linux AFTER Windows, and if you then delete Linux completely, you had to repair Windows boot loader (Or it was the other way?i.e installing Windows AFTER Linux and then repairing Windows boot loader?)
So I've finally managed to install Windows 10 Pro x64 although with Windows 7 left over in dual boot. It created a "Windows.old" folder in the C: drive and Windows 7 doesn't boot anymore. How do I uninstall Windows 7 from my PC and will it affect any files?
I just got my new MSI GE62 2QD that came installed with windows 10. Now I'm new-ish to computer systems but I used to have a dual boot of Windows 7 & Ubuntu using basic bios. Now I am lost with the new UEFI.
Here's my question: With my new pc using UEFI, how would I go about dual booting Windows 10 & Fedora 22 Without using grub. I wish to keep the default Windows boot loader.
I have both windows 7 and windows 10 installed on different ssd's but how can I get so I can pick what os to start when I start the computer? Now I have to go to bios and put as boot drive to start OS I want.
I want to purchase a copy of Windows 10 Pro. I currently own Windows 7 Ultimate. I do not want to lose Windows 7 Ultimate because I have games and other files that I am concerned will be incompatible with Windows 10 in the same way that they are incompatible with Windows 8.
My system specs: Intel Core i7-4790K Asus ROG Maximus VII HERO Club3D R9 290 Samsung 840 EVO 250GB SSD Western Digital Black 1TB WD1003FZEX Asus DRW-24B1ST DVD-RW G.Skill Trident X DDR3-1600 CL7
The 840 EVO has Windows 7 Ultimate installed on it. There are many basic programs installed to this drive, such as Microsoft Office, my Daemon Tools, Fraps, and other "mission-critical" things that I want to access quickly and reliably.
My mass storage drive is the Western Digital Black drive. All my games are stored there, as Steam has a folder it reads most of its games from. A few other large programs are stored there. It only has one partition.
What I've been thinking of doing is when Windows 10 comes out, I want to grab a 256GB Samsung SM951 M.2 drive for my Maximus VII Hero and install Windows 10 onto that. I'm hoping that way, I can access my games via either Windows 7 or Windows 10, so that if there's compatibility issues, I can boot to either Windows 7 or Windows 10 and not have to worry about being able to play my games. I don't really want to do the free upgrade path because I'm concerned that it will replace Windows 7. I don't want that.
I'm also wondering if I can still run the games on the WD Black from Windows 10 using Steam launching from the SM951, as I currently do with Windows 7 on the 840 EVO.
I'm pretty certain that I won't be able to access Microsoft Office, which is on the 840 EVO imbedded into Windows 7's Program files. Or will I?
I just got my new MSI GE62 2QD that came installed with windows 10. Now I'm new-ish to computer systems but I used to have a dual boot of Windows 7 & Ubuntu using basic bios. Now I am lost with the new UEFI.
Here's my question: With my new pc using UEFI, how would I go about dual booting Windows 10 & Fedora 22 Without using grub. I wish to keep the default Windows boot loader.
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
I have two drives with files on them and want to make one drive A inactive(remove windows) so that I can make the other drive have windows 10. What is the easiest way to do that without removing or formating Drive A.
I have a old windows 7 safe mode boot screen that migrated over to windows 10. I works on windows 10 but I don't need it any more so I want to get rid of it. I just don't want to mess up in removing it... I'm using this tutorial... Can't get rid of the dual-boot option on start-up ?
I have uninstalled KB3035583 which has removed the windows 10 script from my taskbar, however I am still getting a message that there is an important update when I boot up to the initial Windows 8.1 screen before my login. On checking what important updates are available, it is only the Windows 10, KB3035583 that it is obviously trying to get me to update again.
After 2 weeks of failure on updating to Windows 10, I have decided to stay with 8.1. I now want to remove the advice to install importantant updates, that pertain to Windows 10, but still showing those for my Windows 8.1 system. At this point, when getting this message, I don't know if it is still just for Windows 10, or if new updates are available for my 8.1?
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).
If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.
I would like to know how to dual boot my win 10 pc with osx as my secondary os. I need mac as I need to see important messages that I receive when I use my pc.
I have win10 64 installed on my SSD and win10 32 bit on a HD. The SSD is GPT partitioned and the HD MBR. I can boot from the Windows boot loader in the BIOS into 64 bit windows on the SSD and, by selecting the appropriate HD in the BIOS into the 32 bit windows in the HD. I cannot figure out how to get that boot menu (either gui of text based) that I have read about in the forums. Do I need to convert the HD to GPT as well. Do I need to change anything to get this to work?
I have Windows 10 and 8.1 dual booted but I’m having trouble removing 8.1. 10 is on a Seagate 2TB HDD, and 10 is on a Samsung 2TB HDD. Both are SATA and my motherboard is BIOS. As long as the Samsung (8.1) is drive 0 and is boot’s first choice, all is well. I get the option to select either OS, and either one can be made default.
In attempting to remove 8.1 I have tried several things like making the Seagate drive O, removing power from the Samsung, swapping boot choice, but always fail and I continually get, “an operating system wasn’t found” no matter the disk or boot sequence, except the one above.
Included are jpg’s of disk management while in Windows 10, both disk and volume views. How to decouple 8.1?
I attempted to set up a dual boot configuration using my existing Win 7 Pro on a Samsung SSD drive, and a clean install of Win 10 Pro on a fresh Kingston SSD drive. I created bootable Windows 10 installation USB, reset the UEFI Bios boot order and proceeded with the install. Win 10 installed, however it would not recognize the Win 7 Pro drive. I checked the UEFI Bios again, and the Samsung SSD was no longer shown in the "Fixed Boot Order Priorities". However, it was listed under "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings.
My motherboard is a MSI Z97 Gaming 5, with Click Bios 4 v1.9.
I must also mention, my Samsung SSD with Win 7 Pro was set up not with UEFI but Legacy boot. This was my first mobo with UEFI, so I made that mistake due to my ignorance.
I reformatted the Kingston Win 10 drive. Rebooted, but got error message that boot device not found. I rebooted and hit F11 to get back into Bios. A popup box gave me a listing of bootable devices and the Samsung SSD appeared. Selected it and it booted into Win 7 no problem. I went back into the Bios, but the Samsung SSD still not listed. I shut down the system, unplugged the Kingston SSD, rebooted, went back into Bios, and the Samsung returned.
I then shut down the system, connected the Kingston into a different SATA port, rebooted the system, went back to Bios, and the Kingston remains unlisted in the "Fixed Boot Order Priorities" as before, but shows up in "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings. Remember that the Kingston is just formatted, no op system installed on it.
I set up the Win 10 install on the Kingston SSD as a legacy drive too. Another question I will ask is can you have one operating system on a legacy drive and one on a UEFI drive in the same PC?
My dual boot configuration has 10 with classic shell and 7 pro. Classic shell has settings for taskbar which control opacity and color. My 7 just showed a nearly transparent taskbar so I went to 10 and changed classic shell taskbar settings to opaque then back to 7 and the taskbar was now opaque.
So i currently have windows 10, build 10162, and i like the OS X, especially since i do video editing, and i love the workflow. The problem is, everything on my PC is optimized for windows, and some things wouldnt work on a mac, and i didnt want to spend the money on a mac. I know its possible to dualboot some OS's so i want to know if theres a way i can just add an OS to my current pc. I have an extra HDD that i could put it on. And i want to put Yosemite on it, and i also have an intel CPU, nvidia card, which i believe is necessary for a hackintosh.
I'm planning to download the iso, or whatever file it is from the Microsoft website, and install it using that. (I never got the taskbar notification,.how I can make a dual boot on my second hard drive using that download (another thread I made, I've gotten the hard drive working and want that to be my dual boot, not having two operating systems on one hard drive)
I would like Windows 10 on my second, completely wiped hard drive.Unless I'm able to use my Windows 7 disk to install it on the second hard drive, and use the Windows 10 download to upgrade it on that hard drive in particular?
