I have HP Elitebook 8460p with mobile broadband module. Am using internet on my PC with Mobile Broadband using Cellular network sim card. So can any body know hot to send sms from windows 10. I know that Windows 10 have own message apps but it just received sms. and when i try to send sms from it. The an error received that make sure you have turn off Flight mode. but i have also turn off my flight mode.
View 2 RepliesI'm using Windows 10 Mobile on Lumia 925 and am unable to send or receive MMS (text messages containing images).
Mobile internet is working, as well as normal text messages but whenever I try to send a message containing an image, it simply says "failed - tap to try again". Of course, I can try again, it still doesn't work.
APN settings are ok.
Note that on Windows Phone 8.1 I had no such problems on the same phone. This is Build 10586 but it already didn't work with previous builds.
Win 10 and WLM 2011 (Windows Live Mail.) Previous to upgrading to Windows 10, I sent and received emails using WLM. No problems, everything worked fine. After Win 10 install over win 7, (keep all settings, apps etc) I cannot send/receive emails, nor can I use Chrome Browser "This page is unavailable" But that is another issue for later.
I have checked and double checked the settings, Servers, usernames, passwords etc. Still cannot connect
Message received: "Unable to send or receive messages for the XXXXXXXXXX account.
The host 'pop.XXXXX.com.au' could not be found.
Please verify that you have entered the server name correctly.
Server: 'pop.XXXXX.com.au'
Windows Live Mail Error ID: 0x800CCC0D (Googled this, but the answer was to Uninstall Zone Alarm etc, and I do not have it)
Protocol: POP3
Port: 110
Secure(SSL): No
Socket Error: 11003
Makes no difference if the email is Gmail, Yahoo, or POP/Imap. I don't want to resort to using MAIL/Calendar with Win 10. The internet connection is working fine, but not for WLM 2011 or Mozilla Thunderbird 38.2.0 (Just found out) I can use the internet connection with EDGE, but that is all. Yes, I did goto win10 help pages, but still no fix available.
Looking for settings for POP. Can send but cannot receive.
View 17 RepliesWhen I try to sync a folder, it just tells me it can't connect to my server or there's some other problem.
I can access my emails for the same home account on my work computer because it does not have Windows 10.
I wish I'd never accepted the upgrade. It has cost me hours and hours of time and much missed communication.
I now get "Network Operation Failed"
and below that,
"Error with send/receive. There was an error synchronizing your folder hierarchy. Error: 80041004"
This Outlook install is part of Office 2010. Everything was running fine until this morning. I did a lot of searching and found a reference to a Control Panel setting. However, now, it appears that Control Panel has gone missing!!! I ran a utility on the command line, I forget the actual command, to deal with corrupted files. It found some issue, so it said. I rebooted. Nothing has changed... I've wasted the whole day so far.
I don't know if it is related but I seem to also have problems on some web sites displaying images. As if the HTML is displayed only, without the css settings. (Chrome browser) - same on Firefox browser.
I updated the phone 2 days ago and since then i am unable to send and receive SMS.
O.S Version: 10.0.10149.0
Model: Nokia Lumia 925
I am running windows 10 pro and now i want to update my system using "Windows Updates". The problem is that Windows Update is showing numerous new updates for the system but i have a mobile broadband (ie. usb dongle type) for internet purposes over which i want to download all the system updates. but the updates wont download maybe because Windows 10 has set this connection type as 'metered'.
Whats even worse is that the metered and non-metered choice is grayed out and i cannot change it. I then tried the command prompt method described on this site. it momentarily does change the mobile broadband connection as 'Unrestricted' but STILL windows wont download any updates over this connection .
I want to know HOW to download updates through Windows Update application using my mobile broadband connection.
editing the relevant registry entries to force Windows use mobile broadband for Windows Updates?
PS: I don't have ANY other source of internet ie. Wifi or Ethernet.
Would I be able to do this with windows 10 0n my laptop or would I have to await mobile 10?
View 8 RepliesHaving changed from windows 7 to windows 10 MS word now requires one to log into Microsoft Exchange to obtain address book MS exchange apparently is now required (at a PRICE) to send an E mails direct from MS word.
View 1 RepliesI like to think I am fairy familiar with installation and set-up but this has got me beat. After installing Windows 10 my wifi continually drops out every 10 minutes or so. Cable connections are fine and other devices in the house are fine; just my laptop.
View 1 RepliesCan't connect to broadband connection... The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got:
There might be a problem with the driver for the Ethernet adapter
And
There might be a problem with the driver for the wi-fi adaptor
I am using Windows 10...
Can't connect to broadband connection. The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got "There might be a problem with the driver for the Ethernet adapter" And "There might be a problem with the driver for the wi-fi adaptor". I am using Windows 10 ....
I recently purchased an all in one HD PC which has windows 10 as its operating system. When trying to set up broadband connections and email accounts I have encountered problems. Technicians in both cases said there were probably corrupted files in the system. Another problem is the when the computer goes into sleep mode or is shut down the modem also switches off. I have been told by Telco technician that the modem is ok. It is only connected to PC by Ethernet cable.
View 8 RepliesHow to create a Dial-up, broadband connection shortcut placed on the desktop. B4 the shortcut I had to:
-1- click on the R-side of the task bar icon
-2- Click on the broadband strip on top
-3- Click on the connection
-4- click on Connect
Creating a shortcut from there (Settings -> Network & Internet -> DIal-up) onto the desktop actually creates an extra step since it defaults to VPN instead--and even if it didn't it would still be 4 steps. Is this any way to make this a 1 or 2-step process?
Not able to receive new updates for Windows 10 after upgraded from 8.1
View 3 RepliesMy Surface Pro alerts me when I miss a phone call. I can sends texts through Cortana, but it doesn't show me the text messages when I receive them on my phone.
View 3 RepliesI am running a Virtual Machine in VM Ware and on Windows 7 Ultimate it worked fine no problems at all. But suddenly after the upgrade to Windows 10 Pro I no longer receive internet on my VM.
View 1 RepliesWin 7 allowed this, but I can't figure out how in Win 10. I want Win 10 to "trust" my Galaxy S5 and automatically receive and save files sent by the phone. I send multiple files, usually photos, and having to go through all the manual steps for each picture is not working for me. I have Googled this and searched forums to no avail.
View 9 RepliesI cannot send files via bluetooth from my PC to same smartphone 4.N4.2 Samsung Note just cannot send files from my smartphone to my PC.
View 1 RepliesI just installed a new SSD and moved my OS onto it, however now I can't start my computer with both of my displays plugged in (1 HDMI and 1 DVI). The main display (HDMI) will flash on and off while the DVI does not receive any signal, until I unplug the DVI and then the computer starts like normal. Both displays work just fine after it has booted.
My display driver is NVIDIA GeForce GTX 950, and it is up-to-date as of the time I'm posting this. The Nvidia control panel recognizes both displays and has the HDMI selected as the main display without me having to touch it.
I could boot with both displays plugged in before I installed the SSD.
I did a clean install of Windows (not cloning) originally on the SSD and even tried to re-install again to see if it would fix it and it does not.
The only option in BIOS related to display is to go back to my processor's integrated graphics instead of my Nvidia card, but this really should not be related to the issue at all as both the DVI and HDMI are plugged directly into the Nvidia card's ports.
Something I found very weird when I was checking the BIOS is that if on boot I go to BIOS, exit, and proceed to boot, it works just fine. But not if I just do a normal boot.
I am using a Samsung Slate 2 64 Bit. Since upgrading to Windows 10, it will not print. The paper feeds as if it's going to print, the power button begins to blink slowly as if it's spooling, then nothing. It eventually times out and I get a print error, sometimes it tells me that there is no driver. I have updated the driver through the HP website, I've wasted countless hours online with support controlling my computer. I've had 3 technicians from HP just disconnect and not say a word because they can't figure it out.
My BT is working fine, I've checked. The printer works as it should with a wired connection. I have bought another identical printer and the same thing happens, so I know my printer is not broken. One tech told me that the print spooler isn't running, and indeed sometimes it does stop suddenly. What does happen is that I hit print, the printer does its typical "nothing", the paper feeds and everything stops until I reboot. It will not even allow me to delete the print job until I reboot. As soon as the computer shuts down, the job will print. I've read that there is an issue with the print spooler for Windows 10. I cannot seem to find any updates with a fix. My only solution I can see possibly is somehow go back to Windows 8.1 until Windows 10 actually works.
Well, When I set a location based reminder in PC in cortana, does it remind me when I take my phone there? I use both the OS with my same hotmail id.
Or is it like PC based reminders, will be noted only when you take your pc to that location?
Can stream audio over USB on windows 10 mobile? I want to get an external DAC and feed audio into over USB... (not mass storage mode though) just want to check if it might work.
View 3 RepliesYou know in it's counter part either Windows 10 or even Windows 8.1... You can select which Apps to use and it's a lack of experience, I have had some problems in WP8.1 because of I use certain Apps and they "read" PDFs however they can't and each time that I open a PDF, I must open it from the App because of if I use a file manager always I need to choose which App I want to use. I hope it's going to be solved! Or at least they could add a tick for remembering our options.
View 1 RepliesI performed the Windows 10 upgrade. Since that was completed I've been getting a receive error in Outlook 2013:
Outlook 0x800ccc1a - Your server does not support the connection encryption type you have specified.
I can send emails, but am not receiving.
I did some research and found a tip to do a cmd prompt with:
sfc/scannow
I tried doing this many times. It always ends with this message:
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log.
The scan does not fix the email problem I'm having.