I have a laptop running windows 10, it is a Toshiba satellite l10w-b. I want to upgrade its 5400RPM HDD to an SSD. It doesn't have a disc drive. would I be able to simply plug in a windows 10 drive and enter the product key or to I have to go through BIOS settings.
View 1 RepliesBefore installing Windows 10 I clean reinstalled my Windows 7 onto a new SSD but inadvertently left my BIOS boot drive as my old HDD. Now I find that I have my windows 10 boot files in the HDD and the rest of the OS on the SSD, so I am still dependant on that old HDD. It's quite old, and I tried to swap it out to a new HDD but found this issue.
I've tried BootRec /RebuildBcd, BootRec /FixMbr and BootRec /FixBoot, rebooting the PC between each, but without success. I want to make the SSD bootable, what have I missed?
So i accidently remove windows 10 boot entry from EasyBCD. Now i cant boot it at all. It says Windows failed to start. A recent hardware or software change might be the cause. Status:0xc0000098. Can it be recovered without reformatting the SSD?
View 1 RepliesUsed Diskpart to access a spare OS that is same as my main OS, now I can not get the spare OS to boot? When I try and boot it go to Preparing Automatic Repair, can't get past this.Will not boot in save mode or nothing. Can still acess the drive from other OS,is there a window file I can change or be deleting to boot this system. Hope I don't have to wipe this drive and start over,it's my backup drive.
View 8 RepliesI just put a gtx 750 and an antec earthwatts green psu into an ol computer with a q6600, It runs windows 10. When I try to boot it up it gets to the windows logo and the loading circle and then the monitor says "no signal" and then turns back on again to the bios logo.
View 1 RepliesI want my ssd to be the boot drive and hard drive for storage. I recently installed windows and I accidentally installed it on the hard drive.
View 1 RepliesI have Windows 7 and Windows 10 Enterprise Build 10240 set up in a dual boot configuration on the same hard drive. Windows 7 is the first partition on that drive and Windows 10 is the second. I have decided to keep Windows 10 as my main OS and want to remove Windows 7 and reclaim that space for the Windows 10 partition.
What is the easiest way to accomplish this without a complicated and long procedure? I have tried Easeus Partition Master 10.5, but am unable to format or delete this active partition. I tried to format and/or delete this through Windows 10 as well with no success.
My system is home built, the boot drive being a Samsung 850 EVO series m.2 SSD. Win 10 was installed via USB, the ssd being the only installed drive. Installation was very quick and easy and once booted the PC performs very nicely.
However, very time it starts from shutdown, on the 1st attempt it reaches the Windows logo and shuts down.. I can guarantee that the 2nd attempt results in a perfect startup. I don't know if this: "BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys" is relevant.
All drivers seem to be up to date and working. Safe mode it starts 1st time. Fast boot enabled/disabled makes no difference.
I prefer to have my system shut down overnight rather than sleeping. Is there any way to schedule a system boot at a specific time in the morning? Windows update is able to boot from shut down when it feels like it. Is there any way I can do this, apart from putting my PC to sleep overnight?
View 9 RepliesI was playing with disc partitions and i accidentally deleted something... The problem is, that when i start my computer, Windows boot manager error appears (with no options, nothing, just some text about how should i reinstall / repair...), but when i start my computer, i have no way to access BIOS (I know how to access bios in my pc, I was accessing it like 20 times during last few days while installing various OSs... always with F2).
So actually I am stuck in a loop: start pc - cant access bios - windows boot manager error- restart - cant access bios - win boot manager error - restart....
With windows, i had problems with accessing bios before, but it could be solved by some kind of "absolute shutdown" of a system - holding shift while clicking "Shut down" - then i could easily enter bios with F2 during start.
I started having issues today while playing World of Warcraft. Occasionally it would freeze and I would get a notification along the lines of "Nvidia display driver has crashed and recovered successfully". It started happening more frequently and sometimes was restarting my PC instead of recovering. I tried to update the Nvidia driver (I did have an update) but no joy, it happened again. I tried logging into WoW and quickly changing settings, however it restarted again, this time even windows refused to recover.
It now attempts to boot about 3-4 times then the troubleshoot options appears saying it failed to load windows. System restore can not find a restore point and Go back to the previous build refuses to work also. I am at a loss to what is causing this? At first I thought it was an issue with overheating but the temp never even went above 80. I tried rolling back the nvidia update in safe mode but that did not work either.
What can I do, without having to reset my pc?
I have 2 SSDs and a few mechanical HDDs. I was dual booting (with Win 7 and 10) by changing the bios boot order for a while but have now decided to stick with Windows 10. By default Windows 10 loads. However I used to have Windows 7 as my boot drive. I want to now format the older SSD that Windows 7 is on and use it as a backup drive. Before I format my old Windows 7 drive I want to check that 10 will load okay. In the past years I have removed drives and found my OS no longer boots, so I don't want to make that mistake this time. I need to make sure my boot is coming from the 10 drive. So I have done a screen grab for you to see. Do I need to make the actual 10 partition active, or is just having the 500mb reserved partition as active ok ? The windows 10 drive is listed as such (C) and the Windows 7 drive is titled "Ready to Format" (H).
View 1 RepliesI have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
View 9 RepliesWindows won't boot, and it also won't repair install, refresh, reinstall (Windows 10), chkdsk, boot repair etc. I have tried all these so unless anyone can think of anything else I will have to do a clean install and upgrade. I suspect the hard drive has failed though.
View 2 RepliesWindows 10 currently installedUEFI (Legacy/BIOS is supported but I do not prefer using it as it may cause more problems in the future)1 Hard Disk Drive
Goals: Install Windows 7 on another partitionMaintain my current Windows 10 installationNOT have to switch to Legacy/BIOS mode
I found this: Windows 10 - Dual Boot with Windows 7 or Windows 8 But it assumes a Windows 7 installation and subsequently dual booting Windows 10 on it. What I would like is essentially the opposite.
I want to upgrade to Windows 10 to see how it works but... I also want to keep my Windows 7 in case anything goes wrong. So, how can I dual boot Win 10 with Win 7? It can be done when upgrading or I must download an .ISO file and burn it on a DVD? And I will also need some instructions about dual booting. By the way, I already backed up my files on my external hard disk if anything goes wrong.
View 1 RepliesI have just built a new gaming PC and everything works fine, windows installed correctly, all drives are recognized programs are installed etc.
But I have a small problem... When I shut down, power off and leave my PC for a while, upon startup, windows wont boot. It goes onto the motherboard screen and then says ''starting automatic repair''. It gives me a list of options, and the only option which gets me back to windows is to restore to a windows recovery backup which I created. Every time I shut down, I have to restore and then add a few programs that got removed which is very annoying.
The PC is stable and all my programs which are installed are working fine, but for some reason, it enters this recovery mode when I start up from a shutdown.
I am running windows 10 64bit, my motherboard is an Asus VII Hero and I have installed all the drivers which are needed along with a few programs. I am thinking I may need to do a re-installation of windows, would that fix the problem?
Yesterday morning the PC worked fine. Last night it refused to load Windows (10) but rather froze on the logo, with the whirly loader. Forced shut down, tried again, same deal. Next time it said "Starting Windows repair", but froze. Next time it said it too, and the next time it didn't. It hasn't said it since. I left it sitting on the frozen screen for about a half an hour, and it gave an error message "Boot disk inaccessible". Unhooked everything, reset CMOS, checked BIOS, reseated memory, ran memory diagnostics, etc..
So I put in a brand spanking new SSD assuming the old one was to blame (as it had become a bit sluggish anyway, being a few years old and all) and went to install new Windows from an official USB stick. And up comes Windows logo and the whirly loading thingy.... and it freezes. I just don't know what to do anymore.
Whenever I try to install a 64 bit Windows 10 copy from a flash drive, I get stuck on the 4 blue squares, with no white dots spinning. Then after about 10 seconds the PC restarts. I have tried the official way with the media creation tool, I have tried just downloading the ISO and using a third party bootable USB maker, I have tried ISO's from pirate sites (yes, I know, not the best solution) but none of those worked. Every time I tried a different method I always fully formatted the USB drive. Oddly enough the 32 bit version worked once or twice but even that doesn't work anymore. My PC specs are quite good so I really don't know what's the issue. Btw im running a 120 GB AData SSD and a 1 TB Seagate hard drive.
View 5 RepliesI have two drives with files on them and want to make one drive A inactive(remove windows) so that I can make the other drive have windows 10. What is the easiest way to do that without removing or formating Drive A.
View 2 RepliesTo cut a long story short I ended up with two installs of Win10 on two partitions of the same drive. I then deleted one of these partitions along with its recovery partition. Now when I boot, the boot manager loads and shows two possible windows versions still. However, only the first one will boot (obviously) and the other fails. What is going on here and how to I prevent the boot manager from always opening?
View 2 RepliesUpon starting windows (10) I'm constantly being shown the boot manager and the only OS I can choose from is windows 7. I am using W10 having upgraded from W7. Windows still boots but the startup times vary from 15sec to around 3min.
Here is a screenshot of my boot tab in msconfig and a screenshot of mt disc management screen.
- Album on Imgur
how to be able to install both Linux and Windows 10 on my laptop's hard drive?So that when I restart my laptop I will be able to choose from either Windows 10 or Linux?
I did that once with Windows 7, and I remember I had 2 possibilities: Either to be able to choose through a Linux prompt at the startup, or through a Windows prompt. I tried both options. (It was either doing it via a Microsoft boot manager or via Linux boot manager or something like that, I just can't remember)
Edit: I remember there was some sort of Linux boot manager if you install Linux AFTER Windows, and if you then delete Linux completely, you had to repair Windows boot loader (Or it was the other way?i.e installing Windows AFTER Linux and then repairing Windows boot loader?)
So I've finally managed to install Windows 10 Pro x64 although with Windows 7 left over in dual boot. It created a "Windows.old" folder in the C: drive and Windows 7 doesn't boot anymore. How do I uninstall Windows 7 from my PC and will it affect any files?
View 7 RepliesI am dual booting Windows 10 and Windows 8.1. Each operating system is on a separate physical solid state drive. My default is Windows 10. The Windows 10 OS was installed on the drive that originally contained Windows 7 when I dual booted Windows 7 and Windows 8.1. I don't have drive partitions to deal with as each operating system is on a separate physical drive.
Now I would like to remove the dual boot by removing Windows 8.1, leaving just Windows 10. That will leave me with an unused SDD.
When I am in Windows 10, the default OS, the msconfig Boot section shows Windows 10 as the default, as it should. To remove the dual boot, can I just Delete Windows 8.1 from the Boot section of msconfig and make the setting permanent?
I just got my new MSI GE62 2QD that came installed with windows 10. Now I'm new-ish to computer systems but I used to have a dual boot of Windows 7 & Ubuntu using basic bios. Now I am lost with the new UEFI.
Here's my question: With my new pc using UEFI, how would I go about dual booting Windows 10 & Fedora 22 Without using grub. I wish to keep the default Windows boot loader.