How To Change Monitor Resolution To 1600x900 After Upgrade
Aug 6, 2015ASUS M2A-VM on motherboard graphics. Windows recognizes the correct monitor. How can I change my monitor resolution to 1600x900 after Win10 upgrade?
View 1 Replies
Similar Messages:
Why Does The Resolution Change When 1 Monitor Turns Off And On By Itself
Nov 15, 2015I have 2 monitors plugged on my desktop PC running widows 10 pro. I'm facing a technical issue with one of them but cannot replace it for now. The problem on that monitor is that it turns off and on by itself randomly. Each time it happens, the resolution on the monitor that doesn't have this problem changes. This is very annoying of course. How to prevent this?
View 6 RepliesGraphic Cards :: Changed Monitor Resolution Now Monitor Says Input Not Supported?
Nov 27, 2015I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
Graphic Cards :: Cannot Get Resolution Right On TV Monitor Connected To PC
Mar 5, 2016I have temporarily connected a 22 inch LCD tv monitor( until i get a new one) to pc via HDMI lead but i cannot get resolution set right.The recommended native makes the taskbar disappear of screen and the desktop icons are barely visible on left side of screen.
I have tried various resolution settings but all are no good apart from one which makes the desktop look like like a laptop screen.
I have reset Windows 10 and updated Intel Graphic Card drivers to the latest but still resolution cannot be set correctly for monitor and used a VGA lead aswell.
Is it because you need a proper pc monitor to have correct resolution ?
Monitor Resolution 1360x768 - Input Is Not Supported
Jul 30, 2015A friend of mine upgraded to W10 this afternoon after being on W7 Ultimate. Everything seemed okay until he went to change his monitor resolution. It isn't listed under the resolution settings in the control panel. His monitor's native is 1366x768, but even when selecting 1360x768, it says that his input is not supported.
This is strange considering it worked just fine when on Windows 7. My only thought is that his GPU is quite old - It's a ATI Radeon HD 4600 Series, and the monitor is an Acer X193HQ. He doesn't know an awful lot about hardware, but I believe he's using a DVI cable from the PO.
Changed Resolution Too High - Monitor Doesn't Support
Oct 13, 2015I'm using Amd radeon graphics, windows 10, of course, but the problem is that i unleashed my change-settings-see-what-happends power and i changed my graphic cards resolution a little too high... And now i only get the error screen 'resolution too high, change it to 1280x1024■60fps'.
But i cant do that if I'm unable to login to my desktop. And actuallt i DID reach safe mode trough F8 but i screwed it, I changed the resolution in system settings, cuz i could not reach the graphic driver... so i restarted my computer without any profit, and now i can't get back to safe mode either...
Graphic Cards :: Generic PnP / Can't Adjust Monitor Resolution Correctly
Mar 5, 2016My computer currently has 3 monitors connected to it. 2 through the graphics card (R9 280), 1 through the integrated graphics (AMD HD 3000). Not sure when why or how, but the integrated graphics card can never pick up what type of monitor is connected to it... so it always gives me a bunch of generic 4:3 resolutions...
I've tried uninstalling the drivers and letting them reinstall. I've tried swapping around the cables to see if i could get lucky with one of the other screens, but they all face the same issues. I've tried buying brand new cables across the board because sometimes people say that's the issue. But not success.
The cloest thing i have is apparently a custom resolution setter, but it was created for windows 7 in mind and doesn't seem to work on windows 10 (PowerStrip).
My question is, is there anyway to format the list so i can select the correct resolution? It's a Toshiba TV/Monitor and it seems like every thing else attached to my pc (even 3rd party programs i tried to use to forcably change the resolution) can spot it and hand me back the correct resolution but i can't seem to change it. I get Genertic pnp through the control panel (the only place the monitor shows up in) and even then the correct driver doesn't show, it's the Microsoft Generic driver.
Mobo: MSI AMD 3000 series, cant find exact model.
I've updated my AMD drivers to the latest and so far can only modify the resolution to stock ones that look horrid on the screen. Any program in windows 10 to change the resolution of a screen.
Change Resolution Without Signing Out?
Aug 5, 2015So on my dell xps 13 that I just put windows 10 on, I'm looking for a way to have the icons rescale to the correct size when changing displays without signing out? For example, I'll have it plugged into my monitor, then unplug the laptop to use it, and when the laptop screen turn's back on everything on the desktop is supper small. A sign out and in fixes this, but that's less then ideal.
View 1 RepliesHow To Change / Set Resolution To 1920x1080
Jul 30, 2015I have just recently upgraded to Windows 10 and I haven't found a way to set my resolution to 1920x1080.
View 1 RepliesCan't Change Resolution To 1080p Or Update Driver
Jul 31, 2015I cant change my resolution at all and I've gone to the geforce site to update my driver and it keeps failing to install it? These are my current specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-410033 C Zambezi 32nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard ASUSTeK Computer INC. M5A78L-M LX (AM3R2)25 C
Graphics Generic Non-PnP Monitor (1280x1024@64Hz) / NVIDIA GeForce GTX 460 (PNY)
Storage 931GB Seagate ST31000524AS ATA Device (SATA)25 C
Optical Drives TSSTcorp CDDVDW SH-222BB ATA Device
Audio Realtek High Definition Audio
Screen Resolution Stuck On 800x600 - How To Change It
Aug 9, 2015We installed windows 10 on our desk top computer from direct download. once everything was completed. The resolution on monitor is stuck on 800x600 and the desktop is compacted in the middle of the screen. The monitor is 19 or 20 inches, but nevertheless the desktop is about an inch and half smaller on each end of monitor. We were able to change through settings icon size, but still left with compacted screen.
View 8 RepliesWhy Can't Control Brightness And Change Screen Resolution
Jul 31, 2015i have downloaded and install windows 10 from the official site on 31st july,but i can't control my brightness option and resolution option....
View 3 RepliesGraphic Cards :: Blurry Text On Secondary Monitor In Multi-resolution Multi-DPI Setup
Nov 16, 2015This is probably the most painful issue I have with Windows 10 right now (and likely previous versions as well, but I didn't have a multi-monitor setup back then).
The monitors I have are as follows: 3840x2160 (4K UHD) monitor with preferred DPI: 144 (150%)1920x1080 (Full HD) monitor with preferred DPI: 96 (100%)
Whenever one of these monitors are set as primary, all desktop applications displayed on the secondary monitor (doesn't matter which) has blurry text. Exceptions are the Windows Store Apps like Windows Store and Microsoft Edge, along with the Taskbar/Start Menu, the Taskbar/Start Menu settings screen, the Taskbar context menu, and the desktop context menu which passes the DPI test with flying colours, with crispy text on both monitors (occasionally a DPI switch bug gets in, but I can mostly ignore that). The problem is, as you can probably guess, is that >99% of the applications I use aren't Windows Store Apps.
Here are some screenshots. The "Taskbar and Start Menu Properties" text is what the text should look like while the Visual Studio 2015 text is an example of the text most desktop apps get. The blurry image is what happens when the UHD monitor is not the primary monitor. Attachment 48493Attachment 48494 Note: Both of these screenshots came from the 150% DPI monitor so it's best viewed at that (144) DPI level. The 96 DPI monitor is similarly affected.
Things I've already tried: Reinstall the graphics driver. Did this multiple times in fact for unrelated reasons.Reinstall Windows 10 (through Reset This PC recovery option). I did this for also unrelated reasons but it definitely doesn't fix this issue.Use the XP Explorer "fix". Merely worsens the problem. Adjusting Clear Type options. Alleviates the issue a bit but see next point.Disabling Clear Type on the affected monitor. The text obviously sharpens, but it's painful to read and a close inspection of the text reveals the issue isn't solved at all, only mitigated slightly.Replacing the video card. I swapped this in with my older GTX 560 Ti but it's obvious the problem remains. Both it and my current card are NVIDIAs though, so it's vaguely possible the drivers or the cards themselves are the cause. I don't have an ATI/AMD card (that still works, at least) to test the setup and every Intel iGPU I have either has only one monitor output or is incapable of handling UHD resolutions.
Things I won't try: Setting both monitors' DPI to 96. Text would become microscopic considering the UHD monitor's actual size.Use the text resizing feature instead. I'm going take a wild guess that this is not monitor-specific and would cause everything on the HD monitor to be far too large to the point that I'd rather unplug it.
Looking for multi-resolution, multi-DPI, multi-monitor setup with or without this issue? The text is painful to read on whichever is the secondary monitor right now, and is extremely apparent whenever the background is dark.
Graphic Cards :: No 4K Resolution After Upgrade
Dec 13, 2015I upgrade my Win7 Pro to Win10 Pro last night and lost my 3840x2160x30 setup, being reduced back to 1980x1200. I've since done a clean install and reinstalled the latest drivers for my Samsung U28D590D and My ATI Radeon HD 5770.Nothing i have done has given me back my 4K resolution.
View 5 RepliesGraphic Cards :: Cannot Get 1080 Resolution After Upgrade
Jan 1, 2016After upgrading to windows 10, I cant get max resolution on my satellite p55-A5312. there is no option after 1366 x 768. I have installed the latest drivers from Toshiba site and also via windows update. but still cant get hd resolution.
View 8 RepliesCannot Change The Screen Size On Monitor
Jul 30, 2015For some reason I can't seem to figure out I can not change the size of the screen on my monitor. I have tried everything in personalization and display settings. Nothing is working. I have looked online and can not find answers there either.
View 5 RepliesScreen Size Change To Fit Monitor
Aug 15, 2015I cant change the size of my screen to fit my monitor! ive looked everywhere it just keeps taking me to resolution size......
View 1 RepliesInstallation :: Monitor Not Working After Power Outage During Upgrade?
Sep 13, 2015About 2 weeks ago I was upgrading Windows from 7 to 10. wehn at about 35% through there was a power outage and all power was lost.
When the power came back on, I switched my computer on and the screen was blank, power was getting to the screen, it came up with the ACER brand name and then said 'signal lost' and turned off.
The computer does something, but I'm not sure what as I cant see anythign on the screen, I connected 2 different monitors to get the same response.
What can I do to get the computer working properly, I'm not sure if the upgrade was sucessful or not and need to get information from the the PC.
what I can do to get the use of the computer back again without deleting all the data on it, or how I can transfer the files to another PC.
Freezing / Black Screen / No Cursor And Monitor Goes To Sleep But Computer Still Running After Upgrade
Sep 18, 2015Freezing, black screen, no cursor, monitor goes to sleep, computer still running after upgrading to Windows 10 from Windows 7. Must manually force computer shutdown. HP desktop.
View 1 RepliesGraphic Cards :: Dual Monitor Setup Locks 144Hz Monitor At 60Hz
Nov 22, 2015I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
Drivers/Hardware :: Eizo EV2750 / Windows Not Reading Monitor EDID / Only Recognizes As A Generic PnP Monitor
Feb 10, 2016I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
Chrome Blurry On Second Monitor After Display Scaling On Main Monitor
Aug 10, 2015So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
Laptop Monitor Won't Work - Go To Graphic Setting But It Only See External Monitor
Aug 14, 2015I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 RepliesCannot Change Display After Upgrade From Win 7
Aug 13, 2015I have a Toshiba Satellite (P755-S5215) and the resolution is "squeezed" ... from top to bottom. In addition, I cannot change the resolution. I currently have a "Microsoft Basic Display Adapter" showing in Device Manager.
Should I get the latest Intel Display driver from the Toshiba Support site? ... which is from 2013 and just over 300 mb (why so large)?
Hardware Change During Upgrade?
Oct 19, 2015Over the weekend, I carried out the free upgrade to Windows 10, followed by a clean install. This was on a laptop with the manufacturers OEM licence, and it all worked fine, with Windows 10 being activated correctly after the clean install.
I plan on carrying this out on one of my PCs (which has a Technet licence), but also want to change the Hard drive for a SSD after the initial upgrade but before the clean install. All other hardware will remain the same.I have heard that the licence is tied to the motherboard, but my concern is that due to the hardware change, will Windows 10 automatically activate after the clean install ?
How To Change Upgrade From 32bit To 64bit
Oct 23, 2015I have a 64-bit desktop PC with 8GB RAM installed on it. I had installed 32-bit Windows 7 Home on it (when I purchased the O/S DVD, years ago, I only had a 32-bit machine). Yesterday, I upgraded it to Windows 10.
"This PC >> Property" shows :
-- Installed Memory (RAM): 8 GB (usable 3.4 GB) (less than half)
-- System type: 32-bit Operating System, x64-based processor
Thus, my installed memory remains underutilized. This situation can be rectified by changing the Operating System from 32-bit to 64-bit, I guess. But, the question that I face here is "How do I do that"?
