I have 20 laptops with Windows 8.1, i upgrade all to Windows 10.
I add to one PC all softwares, tweaks and config Userprofile.
Can i clone (with Acronis True Image 2016) ; this one PC to 19 others, and have a valid activation?
I would like to know if i could clone my ssd (m.2) with windows 10, all my files to my storage HDD.i just feel like having it on both my drives just in case something happens to either one.i have it backed up on a usb drive as well,but i just would like it on both.do i have to purchase a program like acronis? is there another way to do it? do you think i should really be worried about this? is it a good idea to have the same operating system on two drives in the same computer?
View 1 RepliesI am using Windows 10. And I just received November Update yesterday.
My new Samsung 250 GB SSD is on the way , and I don't want to install a fresh install. With my 1Mbps (128KBps) internet it will take more than a day to complete.
My HDD is 500 GB , but C drive is only 50 GB.
I want to close only the C drive into SSD and make it a 200GB+ partition (or less but more than 50 GB). I will be using HDD for media storage and SDD for OS and Apps.
I have an existing Windows 10 computer with corrupt W10 image that Microsoft says I need to totally reinstall. I also have a new SSD waiting to be installed. Due to corruption I do not want to clone. W10 USB has been created with Media creation tool. The questions - Do I need to format the SSD before W10 install? If so, how? Do I need to partition the SSD? If so how and with how many partitions of what size? I assume then I can unplug the HDD, plug in the SSD, boot from the USB, and it would install W10 onto the SSD.
View 1 Replieslaptop has Win 10 that was an free upgrade from Windows 7. If I clone to SSD will activation remain? I know if hardware changes will be an issue. I will backup key just in case, not sure it is needed. later hopefully a fresh install.
I have used Easeus and Acronis in the past with Windows 7, always with bootable media to do the clone. first time cloning windows 10, was thinking about Macrium, just never tried it. Put the new SSD in place and boot to the HDD as external?
I'm trying disgnosis for my Dad, who's trying to move over to SSD.
The story so far: Using AOMEI backupper bootable disk, we tried to clone his current HDD onto the SSD. Part-way through the clone process, it gives an error saying that the drive is too fragmented to clone, and stops.
We run defrag on the C: Drive, resulting in a 1% fragmented drive at the end, and try again.
The same message crops up - too fragmented. It turns out the 'recovery' partition (It's an OEM machine, so its ~10Gb rather than the normal 100Mb) is too fragmented to clone, and we can't defrag it.
So we just clone the C: drive, leaving 1Gb of unallocated space, and then use the recovery DVD's to run startup repair, hoping it will restore the MBR or 'normal' recovery partition, and make the system load.
All we get is a blue screen with a blinking cursor in the top left that persists or over 5 minutes.
Startup Repair completes successfully. According to the Log file it ran 2 iterations of the repair operations, and found no errors! However the drive still will not boot.
This is particuarly annoying as I have used backupper both personally and professionally and have NEVER seen the fragmentation issue before, or had any issue at all for that matter with a cloned drive.
My previous laptop running windows 10 finally gave up the ghost and died on me. Not a hard drive issue but power problems (in trying to fix it I broke some of the solder joints), any way it was 5 years old and was due to be replaced, however the hard drive was absolutely fine. So I bought a new laptop with a shiny new 1tb hard drive with windows 10 pre-installed.
So having used Macrium before (when I installed a 256gb SSD) I decided to leave the new laptop as a clean install and reinstall any programs that I still needed. Guess what, it seems that there was an awful lot of stuff that I had accumulated that I just didn't need any more. After copying some documents over for work and installing a couple of essentials total space used including OS is less than 75gb.
I cloned my hard drive a Seagate 2T to a WD 2T using acronics software.I removed my Seagate drive and plugged in my WD drive in the same spot and system would not boot tried using windows 10 repair disk no luck plugged the Seagate drive back in booted???
View 4 RepliesDoes Macrium or other common/good backup/clone package can take an existing good bootable SD Card and clone it to a fresh one? do they need to be exact matches [brand/speed/size] or near-proxy?
View 9 RepliesI've installed a new 500 GB Samsung SSD 850 EVO in my system. I want to clone only the "used" portion of my 2TB HDD (about 370 GB) to the SSD for faster performance when I boot, run programs, etc.
I'm a bit of a noob, and when I go into "Disk Management" one option is to shrink the largest volume on my HDD. I'm thinking that if I shrink it down to about 370 GB from the current 1.8 TB maybe then I can go ahead and clone using, say, Macrium Reflect. Once the cloning is done, I want to boot from the SSD, back it up, and then wipe the HDD and use it as a mass storage disk.
FYI, the HDD is encrypted by Bitlocker.
Is it as simple as that? What issues do I need to watch out for?
Received a MSI laptop with pre-installed W8.1. Planning to install a new SSD on m.2 slot. I have several options to update to W10.
p.s: I am keeping both SSD and HDD in my laptop
1) Clone from old HDD to new SSD using MSI burn recovery. Then update to W10
2) Upgrade to W10 on my old HDD. Get W10 activated. Perform a clean install on SSD. Lastly, format my old HDD as secondary drive
I've got a new computer and I want to clone my old OS(windows 10) from my old hardrive to my new hardrive. I've read that it doesn't always work! Is this true? And is there any other ways round it?
View 1 RepliesHow do you clone a Hard drive with EaseUS? Or any other software! Do you just scan hard drive for files Etc. and export the results on to your external hard drive.
View 1 RepliesI had Windows 10 configured to auto log on with only a single user account and haven't had a single issue until last night after a restart to apply updates. Now when I boot my PC I am stopped at the login screen stating my password is invalid. The reason it's invalid is I now have two accounts with my name assigned however the one it tries to log into by default is the newly created one (it looks like it simply duplicated my original) and it doesn't allow any access to Windows. I select my original and log in manually just fine.
The problem is there is only one User listed in the User Accounts settings and that account only appears on initial boot as I can log out to the login screen post boot and the account has disappeared.
If I clone a disc with Acronis true home image . Does it just copy programmas and apps I have installed? This would save me a lot of time if this is true. For example if I have Windows 10 Home installed when I backed it up and installed pro, would it keep my windows 10 professional licence and Office Etc. On to my new install.
View 4 Replies