I bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
View 1 RepliesTried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
View 3 RepliesHere is the issue I am currently at:
I have a Surface Pro 4 that I want to set up a Dual Boot on. I normally wouldn't have too much of an issue resolving this on my own, but due to the Surface Pro 4 not supporting Legacy flash drives, my standard way (Booting into a MBR Flash Drive w/ an Offline OS on it and doing the defrag/moving the files to the beginning of the drive) of solving this issue has left me baffled. I've attempted downloading Rufus and utilizing a MBR ISO (Which failed, since it didn't have the EFI boot sector on it), going back and forth amongst various methods of removing secure boot (which was a doozy at first, after having to go through recovering my BitLocker key) in order to boot from legacy, all to no avail.
Basically, I want to take my SSD, and move all the files to the beginning, which I can't do in Windows due to system files being in use (Ironically, a large portion being near the end of the drive). All I am looking for is a method to create a bootable UEFI flash drive that I can use to defrag/do this from. I've dug a little bit around on Linux and didn't find anything that seemed to be able to do it, as most options seemed only relevant to Windows PCs. Is there any options available to do this? Or would formatting and reinstalling it be the only option?
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
I've always wondered this, since people have told me that you can't copy the files from an .iso and do a clean install of windows, since it is not "Bootable", but I've actually done it many times. Maybe I just don't understand what they mean by bootable?
My understanding is that it means the USB drive can be chosen in the Bios or in the boot menu to be booted from, which is what you have to do to do a clean install of windows, which I have done many times by just extracting the files from the ISO with daemon tools and copying them to a USB.
To clarify, I am not "Upgrading" by running the USB while logged into windows, I am going into the bios and selecting the USB drive to boot too, and it automatically starts the windows installation, where I can then format the drive and install windows to it. Am I not really making the USB bootable?
Since windows 10 has been launched and it has already been downloaded on my PC and installed. I wanted to know how to create a boot-able DVD so that I can also install it later, you know like doing a completely fresh installation and having the windows staying activated. Cuz windows was upgraded to 10 from 8.1 and Microsoft didn't gave me any key, so if I install it again on the same device will it remain activated?
View 1 RepliesHad tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti).
Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before swapping GPU.
Followed all the steps on the Dell site - but afterwards - it acts like my hard drive has died (doubting this - have fairly new Samsung 512GB SSD as the only hard drive).
Computer boots into Bios now - but says "inaccessible boot device". My son had done the update from Windows 8 that came on the machine to Windows 10 - but apparently did not create a boot disk or USB drive.
Can I create a "generic" bootable USB on another computer - WITHOUT REINSTALLING WINDOWS? I do not want to lose info/settings on his machine if at all possible.
Waiting on Alienware Tech support to respond - machine is about 2.5 years old and out of warranty
Possible to Create a Bootable USB for Win. 10 on OS X Yosemite?And if so, how?
View 1 RepliesI am going to be installing an ssd into my laptop in the coming days and I am planning on using the windows 10 set up program to create a boot-able usb for installation. My laptop came with Windows 8 pre-installed and I updated it to Windows 10. If I do a fresh install to the ssd, will Windows recognise my PC and activate itself?
View 1 RepliesDoes the Media Creation Tool create a bootable USB or DVD. If not how can I make it bootable?
View 3 RepliesI am building a new PC with no internal storage. I am installing a 2.5" SATA dock in one 3.5" bay and one 3.5" SATA dock in a second 5.25" bay.
My intention is to have one SSD for my work PC on Windows 10, one SSD for my son for his gaming on Windows 7 (some of his games are not Win 10 compatible yet), and perhaps a third SSD for playing around with Linux installs, etc.
The 3.5" dock will have a 1TB HDD for backup.
From what I have read, since these drives will not technically be external. (plugged into the SATA on the mainboard through the dock, and not via USB or e-sata.), that their creation and use could be problematic if I use the UEFI boot system, or secure boot for that matter.
So.... I am looking for a methodology which I should use to setup these boot SSDs which will give me the least problems and management issues.
A side related question. I have a boot SSD with Win 7 home premium that is eligible for Win 10 upgrade. It currently resides in my Dell Alienware x-51 R1 system, but I want to move it to the new system as the drive my son will be using.
Will there be any issues in moving the drive to a new system architecture?If/when he can upgrade to Win 10, will there be any issues with that since the architecture has changed from the system of origin?Do I need to backup/reformat/restore the drive in order to get it to boot properly in the above mentioned docking bay system?Since only one drive could be used at any one time. In your opinion, do you think I need multiple Windows Licenses?
I bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
View 1 RepliesWhen I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop.
2.Windows will start up to the login window and then freeze.
3.Computer will start, have a blank screen, but still have mouse that i can move.
4.Computer will start with error "hard disk (3f0)
Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
After the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.
I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me.
I cannot seem to install any other way. Media Creation Tool will not start. When I mount the ISO and click on setup I am given a small, rectangular blue window that says "Windows", and it disappears after a second. I have a tried through Windows Update and get fail code 8007005. I also have been notified two separate times through "GetWindows10" icon that I am ready to install and once received the 80070005 code and the other time the famous "Something Happened" screen.I was able to create a bootable flash but my understanding is that I can only perform a clean install if I boot with it and would need to purchase an activation code.
I am running Windows 8.1 64-bit on an HP Pavilion 15 series laptop and I am able to successfully update anything through Windows Update except Windows 10 upgrade. All of my other *.exe files start fine except Setup on Windows ISO.
I upgraded my PC from W8.1 to W10, all went very smooth. I then worked on upgrading a laptop SSD drive to from W8.1 to W10 which I planned to then install in my wife's laptop. It was easier for me to upgrade the drive on my PC then swap the drives than take her laptop for awhile. Well...that created my problem. I had 2 drive C's on my PC.
I was able to boot quite a few times between the drives (swapping the primary drive in BIOS). But then W10 "fixed" my drives, and now I have only one C drive (the SSD laptop drive) and my original C drive is now F. My PC now only boots to the SSD C drive and I'm not able to use Disk Mgmt to swap the letters. Disconnecting the SSD drive stops the PC from booting because the original C drive is F.
How to either swap the drive letters or remove the SSD drive and somehow be able to rename the F drive to C.
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
View 1 RepliesI have a bootable windows installation Thumb Drive. Can Macrium make a backup of this thumb drive so in the event of this thumb drive going faulty, I could make another Thumb drive with the backup image.
View 8 RepliesI am currently running on windows 7 home premium and is planning to upgrade motherboard soon. I know that it is possible for me to create a USB boot drive with Windows 10 on it for a new computer. But I don't know if Windows 7 will interfere with Windows 10. I only have 1 hard drive in my system
View 1 Repliessometimes as I said when I want to create a folder in drive D there is a delay of 3 to 4 seconds why ??also sometimes also when I open a program my SSD there is a delay also why ??it is a clean install desktop DOES NOT freeze when these delays happen
View 1 RepliesI'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
Having recently upgraded to Windows 10 from Windows 7 I have tried to create a recovery drive to go on a USB flash drive. All I get, however, is the message " We can't create the recovery drive. A problem occurred while creating the recovery drive". I have tried a few times without success.
I looked at the Event Log and saw the following which, I believe, is related to the problem: Microsoft-Windows-CAP12. I.D.513.
I am trying to create a system recovery drive on a usb stick using Create a recovery drive in Settings section.
But apparently I am missing many files such as winre.wim and install.wim as I keep getting error messages that I am missing files and instead am told to insert my Windows Installation dvd to get them. Since I have a Win10 Upgrade install from Win 7 Home Basic, I have no dvd install disk to either copy those files from or use as a rescue dvd, and I looked back at Win 7 files on another drive, and the .wim files are not in 7 either, as that was a Dell reinstall dvd (still have that), but no such files there either.
So can I get Mr. Gates home # in case I need to rescue my OS? My past behavior tells me I WILL need to rescue my pc sooner or later, & maybe this time I can be prepared.
So I dont currently have a USB drive, however I have the ISO files for windows 10. I want to install Windows 10 on a gaming PC im going to build in a few hours. All I got to work with is a 2-Sided USB Cable and a second laptop. Is there any way I can create say a virtual USB drive on my laptop, then mount windows 10 on it and plug that laptop into my new computer to install windows 10?
View 1 RepliesI need to create a windows 10 PRO ISO on a flash drive to do an upgrade. They already have Windows 8.1 PRO so they need to upgrade to the windows 10 PRO version.
On the windows media creation tool, I only get an option for windows 10, not any other version of it. Where can i find the official ISO file for it.