I have a disk (HP machine) which has a recovery partition on it. When I go into Admin tools/Virtual disk manager, I can see the drive there (a partition on the real disk) but I can't delete it.
View 6 RepliesAfter the update to version 1511 build 10586 Windows has created a 450 Mb recovery partition on my SSD drive.
I have already deleted the created Windows_OLD folder as well as the hidden folder with update files.
Can I seamlessly and without risk also delete the recovery partition?
Last night I wiped out my ASUS T100 tablet to clean install TH2. But there is a 7GB Recovery partition from Windows 8.1 that I can't get rid off using Diskpart.
View 9 RepliesI have a Dell 11 venue Pro (7140) tablet and I upgraded to windows 10. My tablet comes with 128Gb and I found out that I have many recovery partition. I am not sure which one I can remove it using DISKPART. Below is what I seen on the Disk Management Screen. Only C drive has volume label of C.
1. 500MB healthy EFI system (100% free)
2. 40 MB Healthy OEM Partition (100% free)
3. 2.00GB Healthy Recovery partition (100% free)
4. 109.56GB Healthy Boot, Page File, Crash Dump, Primary partition (40% free) Volume OS (C:)
5. 450 MB Healthy Recovery Partition (100% free)
6. 6.59 GB Healthy Recovery Partition (100% free)
There seems to be far too many recovery partitions and then some. This PC came with windows 8.1 but I upgraded to windows 10 a few months ago.
I also wondering if the proper recovery would take me back to 8.1 again or would it do a fresh install of 10. I hope it is 10.
My Vaio laptop came with a built-in recovery partition (it's 'bout 32GB and hidden). Sometimes I use it to reset my PC back to factory conditions due to unexpected errors. But yesterday I was shocked 'cuz Windows Disk Management showed that my recovery partition was empty! When I checked with different third-party apps they showed the partition had 'bout 27GB in use. In fact I couldn't boot into Vaio recovery mode anymore.
View 1 RepliesI have an HP laptop that shipped with Windows 8.1. I upgraded to Windows 10 weeks ago and tonight I accidentally reformatted my D: drive recovery partition.
I have recovery media on a USB pen drive that I made back when I first set up my computer.
Has Windows 10 changed the D: recovery partition during the upgrade or will it be the exact same image the computer shipped with?
how I can get the recovery files back on the D: partition?
Just installed a new M.2 SSD into an MSI GE72 laptop running Windows 10. First used MSI's Burn Recovery tool to copy the recovery to a USB flash drive. Restored onto the SSD and wiped the HDD. The resulting partitions on the SSD are shown in the attached image. So I end up with 6 partitions:
1 - EFI Recovery
2 - Hidden Windows partition
3 - C: or first usable partition
4 - 900 MB Recovery partition
5 - D: or second usable partition
6 - MSI's OS recovery image partition
The issue I'm having is that I'd like to collapse partitions 3 and 5 into one large partition for the C: drive. I am unable to do this because of the 900 MB recovery partition between them. Disk Management does not give me any options for this partition. Since I plan on dual booting with Linux installed on a second partition on the HDD, I assume I can use GParted to move the recovery partition to partition 5. I also assume that by doing this, I'll break the recovery function as WinRE is still pointing to partition 4. Also, since I'll then collapse the two usable partitions into one, the partition numbers of that 900 MB partition and the MSI OS recovery partition will change. I'm guessing that there is a way to update the settings but I've run across different forum threads that say the OEM recoveries are custom set up by them. So any generic Windows 10 guides I find may not be applicable.
Of course, I have no basis for a lot of these assumptions as this is my first foray into a Windows OS after Windows 7. Also my first time owning a machine with UEFI, which seems to be fighting against me installing Linux.
I don't understand why MSI would decide to split the large usable partition into two? Even more confused as to why they decided it was a great idea to create an untouchable 900 MB recovery partition in between them?
Maybe also try to convince me how UEFI and Windows 10 is so much better than Windows 7 with a custom recovery in a less than 5 GB custom made recovery partition?
i recently upgraded my hard drive to a new samsung 850 pro ssd 512 gb . i used the samsung migration software and it all went smooth , i checked the newly installed ssd in disk management and it shows that it copied all three partitions which are, 500mb healthy ( recovery partition) .........260mb healthy (EFI system partition) and windows (c 476.18gb NTFS healthy (boot,page file, crash Dump, primary partition) .
Everything seemed to be working fine until tonight when i had a ethernet problem which turned out to be one of my ports on my router going bad . but before i realised that all i needed to do was try a different port on my router i tried resetting my pc to factory settings but it would not let me do it with the new ssd drive so i then tried making a recovery usb flash drive but windows said it could not do it because files were missing .
So even though it shows that i have a recovery partition in computer management i cannot use it . i have not got a clue on how to fix this problem with the new ssd . i swapped the old hard drive back in to the pc and tried to make a system recovery usb drive and it worked fine so why cant i do this from the new ssd and why would files be missing from the newly cloned disk ?
i7 6700k
asrock z170 pro4s motherboard
32gb ram
gtx 980 TI
wd blue 3tb drive for storing music and games
samsung 512gb evo pro ssd boot drive
windows 10 operating system
In a fit of over zealous tidying up after installing Win 10 on my lappie, I deleted the 450MB Recovery Partition that the upgrade from Windows 7 created at the end of the main partition.
1) What was actually in that partition and why would I want it.
2) If I do want it, how to re-create it ...?
How can I get back my Recovery D. or Recovery partition? It was accidentally remove on my laptop. How to get it back without recovery media on my laptop and I didn't save it to any disc or flash drive.. ..
View 7 RepliesRecovery Partition...
The thread above reminded me...
My laptop has a partition with Windows 7 on it for recovery purposes. It was a long time ago, but I think I created it from an ISO. I can't even remember how it should be used!
SP3 has been acting a bit funny lately and went to restore and it says the recover partition is missing. I am pretty sure I never deleted it.
View 3 RepliesPretty much exactly what the title says. After upgrading from win7 => win10 I migrated over to an Samsung 840EVO ssd with 500gb capacity and before I knew it, the capacity was almost already full. I scaled back some of my media storage to an external HD but I still want to minimize this partition.
Basically, why is this partition so big? Surely a recovery sector doesn't need to be that big... and secondly how to scale this back if its even possible (preferably without having to wipe the drive and re-formatting/partitioning it) Its currently ~100% free.
I need to hide my recovery partition but i'm using gpt. How to hide? The Set id only work in mbr mode ....
View 8 RepliesI just bought an HP Pavillion 15 ab15nr laptop with windows 10 and messed up the install of my programs. The factory recovery partition is untouched and as far as I know intact. How do I go about returning the machine to its factory condition using the Recovery Partition and starting over again? Boy, I miss having a Win7 type installation disk.
View 2 RepliesI accidentaly shutted down the Lenovo Yoga tablet 2 8" Windows 8.1 during Win10 update. The system won't boot and I don't know what to do. Recovery partition is also corrupted.
What I've tried so far:
1) Install clean Win10 x86 Home copy using Microsoft Media tool - Windows will be installed, but touchscreen, sound etc. doesn't work. Windows Update is unable to find and install those drivers
2) Install clean Win 8.1 x86 Enterprise copy using Microsoft Media tool, then in repair mode try to switch Windows.old Windows, Users and Program Files with current system - doesn't work, the system won't boot and everytime I try to boot the system, it tries to repair system. Without success of course.
Download Windows 8.1 with Bing x86 in hope the system will be in the same condition as I bought it. I also hope it will find required drivers.
If so, I don't have one... I look in Drive management and SSD is all one partition, I assume 232gb is what a 250gb ssd looks like formatted. Is that going to be a problem if I ever run reset or does windows hide all those files somewhere else?
I know I had one before on my old install but it was an update from win 7.
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
I made a 100gb partition because I was going to try and install Windows 7 and have it as a 2nd OS along side Windows 10, but about half way through the computer restarted and I can't boot into Windows Setup. That's fine, I changed the default OS and made Windows 10 be chosen instantly on startup. Although in disk management the (Windows 10) Windows C: partition says Boot, I'm not really sure whether or not it's safe to delete the Windows 7 partition.
View 1 RepliesMy Dell venue pro 11 tablet comes with a 32gb inbuilt space with windows 8.1. Then I got the free windows 10 upgrade which went smoothly.
But now the problem is after the upgrade there was very little space left in my Cdrive. The recovery partition takes up 6.5gb of space. I thought of deleting it using a 3rd party software.
I need to free up that space, currently i have 11 gb free space, adding this would give me 17 gb.
Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?
I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...
would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive".
Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
So, I've had this 1Tb HDD lying around unused, so I had the bright idea of shoving it in place of my Dell Latitude E6410's original 640Gb HDD, use that in place of the old 60Gb HDD on my T60 (a mere 60Gbs just weren't enough to accommodate my Google Drive - running on Linux with InSync - and Mega cloud storage), and put my latest W10 Pro system image on the 1Tb in the E6410.
All well and good so far - except when I checked the partitions after I reinstalled the system image from the original 640Gb, this is what I got:
Which wasn't too surprising, given how Windows works. What I wanted to do was to expand C: into all that extra unallocated space, but as you can see, the recovery partition is in the way. I wouldn't be too surprised, either, if there was no workaround that doesn't involve reinstalling Windows.
I have a Sandisk Cruzer 64GB USB 2.0 thumb drive and I was wondering if it's possible to create 2 disk partitions and install some boot menu to allow me to choose either the Win10 ISO partition or Surface Book Recovery Image when I boot to USB in UEFI?
View 9 RepliesI clean installed windows 10 on my pc that has three partitions. There is no recovery partition (checked with disk management). How will refresh and reset options work - what do I need for them to workÂ
View 2 Replies