How To Do A Clean Install Of Windows
Jul 30, 2015I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 RepliesI was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 RepliesI have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
I upgraded to windows 10 but now I want to roll back to windows 8.1. In the future if I want to perform a clean install in my laptop will my windows 10 still be activated?
View 3 RepliesWhen I got my computer in 2012, I used Windows' own mover to move all files and settings over. I didn't know that that was a bad idea, and so ended up with a corrupted profile and some bad settings.
I am finally ready to do something about it.
Here's my setup:
* Windows 10 (which I am loving, by the way)
* Two drives, C and D. C is my boot drive.
I want to format a new SSD drive with a clean Windows 10 install and then replace my existing C drive with that new drive. I know this means I will have to reinstall everything that is on my existing C drive, but I'm fine with that.
Here are my questions:
1. How can I format my new SSD drive with Windows 10 and get it set up as my new C drive? I have a USB connector for the new SSD drive so I can access it from a USB port first; can I use that connection to install Windows on the drive? The new SSD came with software to clone my existing C drive, but of course that is not what I want; I want a clean install to get away from the corrupted install. Can Windows recognize and format a drive connected through a USB port?
2. When I put my new drive C into my computer, how do I tell my computer that I want that to be my boot drive?
3. Once I get the new SSD installed as my new drive C, how do I format my old drive C as a drive E with Windows 10? Again, I am fine with wiping out everything on that drive once I have a new C.
4. I have a lot of programs installed on my D drive and want to keep them there. Will I need to reinstall them? (Again, if so, I'm fine with that.) Or would symlinks work?
If I understood this : clearly, then does it mean that Windows will activate itself from some Windows activation servers that are somehow written into my hardware even if I do a clean install deleting everything in my Windows partition?
Also, since the built-in "Create a Recovery Drive" will take forever or display an error when ''Backup system files to the recovery drive' is checked", I'm trying to create an Installation media. But I'm stuck with which ISO I should download. Now, there's Windows 10, Windows 10 Single Language, Windows 10 Home, Windows 10 Home N. I'm running Windows 10 Home at the moment. Which was upgraded from Windows 8.1(I think there was ''Single Language'' written after "8.1", not sure though). Which Version should I download. And if I install the wrong version by chance, will Windows still activate after I find out and install the right version? Please clarify these.... I'm really looking forward to do a clean-install to get rid of all the errors and bugs with drivers and just start over.
*DETAILS: Windows 10 Home Build 10240 [Upgraded via free upgrade, had an OEM version of Windows 8.1 when first bought]
I upgraded my Windows 7 to Windows 10 using the windows updater. After windows 10 was installed, I decided to download this Windows 10 and chose the USB option. I booted into my USB and when selecting the partition, I deleted every partition that was there (even the system). Now I am on windows 10 with no activation. I have the Windows 7 product key but it does not work.
P.S its not pirated Windows 7. I got it from Dream spark (on the hub) students saving.
Since I had trouble with the upgrade with Windows 10 running very slow i'd like to try a clean install, but i'm weary because I am afraid it will wipe my 8.1 main partition and not roll back. I'm using this as a guide, but need to make sure i'm doing this properly. How to install Windows 10 - clean install, dual boot or VM | Expert Reviews
View 5 RepliesDon't know if this is a hardware problem or not, Trying to install W10 from USB stick on a ASRock Z87 professional board with default UEFI settings loaded.
The machine boots to USB, then shows the Windows Logo for 10 seconds, then reboots and repeats this loop so I can't even install.
I have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
View 6 RepliesOK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
I'm having issues with deploying out-of the box windows 10 on a Lenovo B50-80EW preinstalled win 7 pro and upgradable to win 8.1 Pro however since the new windows 10 update build 1511 ISO I download I thought it would go through OK . without have to do first upgrade install to windows 10
Secure BOOT on UEFI ON
From putting the windows 10 ISO in drive it doesn't prompt for activation key. As soon as network settings prompts I press shift/ Contro / F3
Now in administrator Mode I check windows is activated however I have the same model of laptop and I want to mass deploy an image but want to use the OEM key embedded in BIOS to each laptop of this model is this possible to be done as I deployed on another machine and got message saying this key is already in use is there an issue with the new ISO available from Microsoft .
I also tried fresh install with out no ethernet or wireless connected and still get on same machine windows is activated in audit mode on fresh setup.
I was using Windows 10 from Last 2 months . Yesterday I did a clean install of windows 10 .everything went well. But now when I try to shut down or restart , windows shuts down. display goes off but laptop power doesn't. Fan and all power indicators stay on.
{I have tried setting the BIOS to default settings. No solution.)
I am using Lenovo Z570(corei5, NVidia 520m)
If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.
View 1 RepliesHow can I clean install windows 10 on a new SSD, saving the fact that I had original windows (that was purchased built in with the laptop)? Do I need to find the CD key?I have a generic one as I upgraded to windows 10 for free (or are all windows 10 have generic CD keys?).How can I use my Windows licence on a new SSD?
View 1 RepliesMine was with Win 7. This was done few years back throughWin7 upgrade disk. I have this Win 7 upgrade disk and COA for it. (Bought from Amazon).... Can I revert back to Win 7.....
View 3 RepliesMy laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 RepliesI'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 RepliesAll the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 RepliesMy PC was running 8.1 French version converted to English version (Reseller screwed up).In practice a lot of the stuff was displayed sometimes in Eng sometimes in French. I have the 8.1 French CD.So instead of doing the upgrade which I thought would result in another mishmash of languages, I did a clean install of 10 Home Eng via USB key downloaded install media.Apart from a few video probs (BSOD) blinking cursor, all went well.I cannot use 8.1 product key to activate. Looks like I may have to buy new product key for W10.
View 19 RepliesI had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
I have been an Insider since the very first Insider build was released. I had installed each and every build first being on the Slow ring and the on the Fast. I had upgraded from a genuine Windows 8.1 Pro.
When the final RTM build TH1 Professional 10240 was released to Insiders ahead of schedule, I readily installed it and my machine was permanently activated at that time. The product key used was a generic one ending in 3V66T. Many of you may be knowing this.
Today, in fact just now, I formatted my system partition and installed a clean copy of Windows 10 Pro from USB which I had created using the Microsoft Creation Tool. When the setup asked me for a product key, I entered the same generic key as stated above. But now when I go to the Settings, it says the key doesn't work and hence, my machine cannot be activated. I signed-in using my Microsoft account before using the PC.
What the heck! I am an Insider. And didn't expect this to happen. What should I do next? Would the machine get activated itself after some time?
How can I do a clean install in my laptop with the windows 10 build 10130?
View 1 RepliesI have win7 and am going to install win10 from usb. I currently have my OS on my SDD and all my docs,prog files,ect on HDD. Ive read a clean install is best for win10.
My question is, can I delete all the SDD OS partitions during install, select install on the SDD while leaving my HDD completely intact? If so, what option would I select to get to the formatting partition screen without it automatically erasing my HDD files?
Currently I dual-boot Windows 8.1 and Windows 10 Insider Preview on my Lenovo Yoga 2 Pro. I want to eventually delete both partitions and create one big partition to clean-install Windows 10 RTM. My question is, will I be able to successfully activate that Windows 10 with my 8.1-to-10 free upgrade rights if I delete and combine both partitions during setup? I mean, because we're not going to be given product keys for our free upgrade, right?
View 4 Replies