Microsoft said a clean install of Windows 10 can happen. How do you find the key? Do you have to use a key finder after the upgrade or will Microsoft make it easily available?
View 9 Replies
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
Have followed instructions & downloaded upgrade only to find every time it gets to 32% it fails & will not go any further, have done this four times outcome always the same, I have 74gb of hard drive free so there should be enough to accommodate the upgrade.
View 9 RepliesI upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 RepliesI got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 RepliesI'm finally thinking to upgrade from W7 to W10.
Here's the situation at the moment:
1) 256GB System SSD
2) 1TB data HDD
3) 3TB Raid 1 HDD for backup
I want to mount a new 500GB SSD as primary system drive, so I was thinking to use this occasion to put W10 into my machine.
So my question is: Can I update to W10 as it is and then do a clean install changing the primary system drive while keeping the license?
There is a lot of questioning about making a clean install of windows 10 once you upgraded from Windows 8.1 retail version.
So there it is :
-If you have NEW hardware : So if you want to make a clean install of win 10 on you're new computer (actually it all depend on you're motherboard). You will need to re install windows 8.1 with you're licence that came with (Of course install it on you're new comp). Then you have to make the free upgrade again. In other words you have to restart from 0. And yes you're license is still good for windows 8.1. After the free upgrade win to 10, it will save you're new motherboard with you're microsoft account to the microsoft activation server. Well, its good as long as the upgrades are free (One year from the launch)!
--So for later re install, as long as you don't change you're MotherBoard,you can start from the Win 10 installer and you will not need to enter any license key. You just skip these steps and when you get on the internet and log on to you're microsoft account it will auto detect you're account with you're mobo and activate automatically. In other words, there is no key from free upgraded windows 10
-If you don't have new hardware : Well its very simple, you mobo is already saved with you're microsoft account so you can just install you're win10 from the installer. You do not enter any license keys and it should activate by itself when you connect to internet.
I think its always good to have a retail version for the actual system that we use with a good license key.
I have a feeling this is bios/uefi related
Got a sabertooth z77 with two ssd on raid 0 (intel) another hard drive for backups (Regular sata) and another storage card (pciexpress sas highpoint 2720, with raid 5)
Windows 10 doesnt seem to like this.
Even booting the dvd itself its a drag and hr wont recognize the raid 0 not even with drivers (driver load will cause a watchdog blue screen)
Windows 7 and 8 dont mind. At all.
I feel like the csm thingy might have something to do.
Bios is latest. Sas raid is for storage only. Ill search for the manual of the board as the printed one doesnt have the options i got on the screen
I did the upgrade on my Laptop from 8.1 to 10, went smoothly everything works so far. Now i have to decide do a reset and do a clean install since i always worry if later there will e a problem, should i safely think if no problems now that if i reformat a clean install that all drivers will be there and everything will be ok. Tomorrow i do my Alienware Aurora R4 desktop and prey it goes well. Then since i have 30 Hard Drives that i will be able to do a network share and be able to see it on my living room TV, will pray.
View 9 RepliesSo I've been using Windows 10 for the past two weeks now. I really dig it, however the hard drive I'm on is slightly slower than my 7200rpm drive which could boot Windows 7 up a lot faster.
I upgraded my Windows 7 installation to this current Windows 10 install and since I want to
1. Sell this current hard drive
and
2. Move to the other hard drive,
I'm in a bit of a dilemma here. I have a large amount of software and important documents installed on this pc.
In the event where I want to clean install to the other hard drive, I don't really want to be tasked with having to reinstall all of this software again, mostly because I don't have installers available for them.
So I guess I want to know what are the benefits to clean installing over upgrading on an already fast hard drive and what would be most convenient in my case if this option is more viable?
I've read differing opinions online over upgrade vs clean install and I want to know what I should do.
I have reserved my copy of Win 10 (upgrade from Win7 Pro 32bit retail) , but i plan to fit a SSD and instill the 64bit version of Win 10.
does windows 10 need to be upgrade installed first so Win 10 recognizes my hardware or can i download the ISO and do a clean install
or will i need to install Win 7 64bit then do the updates and then apply for the upgrade?
I have upgraded my 7 install to Windows 10 this morning. All works fine & 10 says my copy is genuine and validated.
After that, I decided to create a copy of 10 install on DVD with the Windows 10 tool.
At lauch of install, Windows doesn't recognize my old 7 key. I thought "ok maybe it will activate at the end of install"
But NO ! I get my clean & fresh install of 10 but it doesn't activate my copy.
So Win7/8 users who wants Win10, you should install your old version and make the upgrade manually. each time...
Upgraded grand-daughter's pc from 7 to 10. Seemed a bit sluggish running from a spinning HDD so I decided to do a clean install to a SSD using the same USB I had made to upgrade with. Installed just fine but now says the keys don't match and I have to buy a key? Thought the upgrade was tied to your hardware (motherboard/CPU) and a clean install after would be activated?
View 4 RepliesJust wondering looking at my partitions after upgrading to windows 10 . Do I need to keep the last too partitions? I love windows 10 and had presumed that after a clean install my old windows 8 and 8.1 would be removed are these last too files remainders from them and if so can i delete and how should i do so. Just took a snip of the partitions content!
View 3 RepliesI upgraded my Asus X205TA to Windows 10. However I wanted get a clean install so I went into recovery and chose to reset the PC and clean all apps,files, etc.
Whenever I try this it fails then gives me a blue screen with options. Only booting back to Win10 only works.
Is there a way I can get my win10 key and install from a win 10 download?
I did go back to Windows Download tool and had it create a USB stick. Can I use this to do a clean install?
I don't want to move on unless I know I can get Win 10 installed on this again. I know once I erase everythign my there is no option to go back to Win 8.1.
Just a curiosity of mine - Is there a difference between a clean install and performing an upgrade while keeping only the files? In other words, is this sort of upgrade the same as a clean install, only with the files restored to 'documents', desktop, etc.? Or, does the new windows folder contain remnants of the previous install.
View 1 RepliesI've done the upgrade on my 2 computers and then later I did a clean install on the laptop. What I'd like is to do a clean install on my desktop PC but I sure would love to bring back the things I setup when I did the upgrade such as the start page and desktop screens. My start screen is perfect and I hate to set it all back up from scratch if there is any way to keep it somewhere and return it.
I will say, the clean install has always been my preference with any version of windows and it certainly made a nice difference in many ways on the laptop that I've already done both the upgrade and later the clean install.
I have BizSpark, and I'd like to upgrade my Windows 10 Home computer to the Pro version. I downloaded the "Multiple Versions" ISO from MSDN, but when I run it from within Windows, it only lets me re-install the Home edition. How do I upgrade without doing a clean install?
View 9 RepliesI learned how to perform the clean install of Windows 10 after the upgrade. The problem is after I'm finally at the desktop. There seems to be a background process of installing the realtek drivers and Nvidia drivers. But Windows update will also detect the Nvidia drivers and install them as well. But they fail every time.
View 1 RepliesOK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
Recently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install.
However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean install of w8.1
When i installed w10 however i noticed i have an abundance of partitions, and preferably i would only like to have my SSD and HDD as optional storage spaces. I do of course not want to delete any necessary recovery or system partitions, but to me it seems like i currently have too many.
Which of the partitions in the picture below can i delete? Is it safe to delete all the recovery partitions when clean installing w8.1 from usb? meaning that will the installation create the necessary partitions required by windows?
See picture for info(gjenoppretting = recovery)
Windows 10 can't find my USB hub (F4U017). Device manager shows driver SXUPTP.SYS has a problem and has blocked it. I can't find an upgrade.
View 3 RepliesHave Z97 GAMING 5 (MS7917) 1.0 MoBo with Intel Core i7 4790K Just clean installed Windows 10 after upgrade from 7 Pro, but had issues with a Samsung SSD 840 EVO 250GB with MBR instead of the prefered one. Had to EUFI instead of BIOS, and apparently, my data drive (ST4000DM0001F2168) was converted and made the system disk to boot from. Anyway, Windows 10 starts and all, but it will not connect to the internet, 'no network drivers are available'. I downloaded the AMI Bios flash v1.b and updated that. Also downloaded MSI LiveUpdate 6 and installed it via USB stick, but nothing shows up on the scans as it cannot connect.
This all started because the stupid "USB Device not recognized" error message kept popping up and Chrome became so slow back in Windows 7. I did everything I read, to include popping out the MoBo battery. The error message still pops up in Windows 10, and Chrome was still slow after the upgrade. Figured a clean install would fix it all...and now I have a very large paperweight...
I need to clean cookies manually, I tried c:usersuserappdata but can not get, I set permission to show hidden files and folders still nothing.
View 1 RepliesSince I upgraded to Windows 10 I can't find my documents that were previously in this computer. How do I find them?
View 3 RepliesI did a download of Windows 10 a while ago, but didn't update straight away. I now want to upgrade but I cannot find the file to do so.
I used to get notifications telling me to do the upgrade. The reminders really annoyed me as they kept popping up in the most inopportune times, so I turned off the reminders off according to the instructions for not getting the reminder.
What to do to the actual upgrade from Windows 7.1 to Windows 10.?
