When I reboot and go to enter my login PIN the numlock is off and I have to turn it on. I can't seem to find a solution to make it stay on on reboot, except turning off fast boot. Windows 10?
View 2 Replies
Running new Windows 10 Home 64 bit PC for but a few days I have been irritated that as it has booted I always have to switch numlock on. 100% of boot occasions, numlock is turned off. Where I can configure the machine to stop it doing this?
View 7 RepliesSo I'm having trouble with NumLock defaulting on the Logon screen in Windows 10. I have a Dell Inspiron 15R.
I tried the following;
1.On the Logon screen, press the NumLock key on the keyboard to turn it on. On the bottom right corner of the Login screen I clicked the power button to reboot Windows.
2.using Registry tweak, InitialKeyboardIndicators under HKEY_USERS.DEFAULTControl PanelKeyboard using code(s) 2147483650 then tried 80000002 as well as just 2
Before installing Win10 it worked as desired (I did #2 above using code "2").
I just got a new gpu put into my computer. A few things were changed around in the settings. It boots fine and everything is good. Except my number lock key use to light up during boot and I would just keep hitting delete which is my mobos command to enter bios and it would go in. Now when booting the numberlock key doesn't go on and just pressing delete doesn't work. It just goes straight into my windows login.
My computer works %100 fine and I just need to change 1 thing in the bios but I can't get into the setup. How to get my numberlock on during boot or to get into my bios? I don't even see "hit del to enter bios" at the bottom of the screen anymore. And my numberlock key doesn't even go on during start up until the windows login. I went into my settings and unchecked the fast boot up option in the power settings menu. Nothing has worked yet.
The issue I am currently having is enabling NumLock before the logon, I have modified the corresponding registry key (Find attached my screenshot below) and that works perfectly fine when restarting my PC, however I have fast-startup (Screenshot also below) enabled and if I shutdown my PC and then boot it up again, NumLock is disabled by default. I have made numerous searches and can't seem to find any information in regards to Fast-startup or any registry keys linked to it and I don't particularly want to disable Fast-startup. Just to clarify, NumLock is always enabled before logon when booting up my PC and Fast-startup is disabled, however with Fast-startup enabled, NumLock is only enabled when restarting my computer.
View 3 RepliesI chose to log in use the PIN option. I like typing with the num pad.
At the log on screen Num Lock was always off.
1. Checked the BIOS settings:
Ensured that the NumLock status in the BIOS was set to enabled
2. Modified the registry a few times
Key: HKEY_USERS.DEFAULTControl PanelKeyboard
I set the String Value: InitialKeyboardIndicators
to 2
then I tried 80000002
then I tried 2147483650
So I have partial success, where NumLock is enabled after a restart, but it is not enabled after a cold-boot.
HP upgraded from Win7 and Toshiba upgraded from Win8.3 6-10 months ago to Win10.
I've tried to change from Fast Start which fixed only the failure on Toshiba to restart on command which was a good thing. Did nothing for HP.
I've changed the keyboard registry in both computers to the #2 which did nothing. (The HP was already set to 2)
I've gotten the latest patches and upgrades for Win10 on both laptops. Did nothing.
The numlock light comes on and stays on. The on screen icons show either locked or unlocked properly. Only the directional controls continue to work in either locked or unlocked mode.
I've found nothing anywhere that addresses this. Has to be a software issue as computers are different manufacturers and one is 3 years old and other is less than one year old.
It baffles me that it works on startup to put in my PIN and only fails when logged on to Windows 10.
Upgraded to windows 10 from windows 8.1 on July 31st, for the first 20 days there were no problems, now my PC will randomly reboot. The event log only shows that the system unexpectedly shut down, no errors. I read that changing when the computer sleeps from never to a set time has solved the problem for some. I tried this and the random reboot didn't happen for a few days, then a update happened on the 28th of August and now the problem is back.
View 1 RepliesI was using a machine with Windows 7 Ultimate 64bit, and it was working perfect till the day I upgraded to Windows 10. First, I had a few problems during the update, probably due to the not updated (with the last drivers) nVidia card.
My specs:
-SSD hard drive as boot
-MOBO is Gigabyte GA-768XP-UD3P updated with the lastest BIOS from 2013, UEFI.
-a few other hard drives
-nVidia GTX 980 graphic card
Well, I finally was able to install the Windows system, but after the shut down and boot, I couldn't enter it. The computer started to reboot after a few seconds, sometimes I'm able to see the BIOS screen (but pressing any button doesn't work) and then it boots again in a few seconds.
After some search online, I understood it could be a problem of the BIOS that was corrupted (why if it worked till the day before??). I used a very strange system to press the power on button and put down and up the PSU for 3 times, then when I rebooted again I saw the screen with "The main BIOS is corrupted and we have to recover it from a backup".
The setup of the BIOS from backup worked, but with "load optimized default" I then got a Windows 10 blue screen error " :-( INNACCESSIBLE_BOOT_DEVICE"
I then entered again the BIOS and changed some info like AHCI, UEFI only, etc.
Then, after a reboot it worked and I could enter WINDOWS 10 finally.
I thought I was OK, then I tried a reboot and it worked. BUT, when I tried to first shutdown and then boot, again I went inside the BIOS reboot loop!!
Since upgrading to Win 10 anytime that I reboot my machine I get a screen where I have so many seconds to accept either Windows 7 or Windows 7 recovered. I let the timer run down or I hit enter which would load the Windows 7 OS. However Windows ten loads.
View 4 RepliesI have recently been trying to upgrade to windows 10 on a used alienware aurora r3 pc. I got my reservation, checked the windows 10 app every day, and finally, I was ready to get the upgrade, but I'm having issues installing it. After windows update downloads everything and I get to the installation proper, it takes like 4 hours for it to get to about 30% and then finally reboots. I'm taken to a windows ten loading screen, but each time I get to this point, the loading circle freezes. If I turn the pc off at this point and back on again, it reinstalls my normal windows 7 and I'm able to get back to my files and everything, but I still really want to get 10. Solved Build 10041: Freeze on Restart - Windows 10 Forums My issues seem to be similar to what is described in this article, and it may have something to do with it setting "fast reboot" on by default. What do I need to do to resolve these issues?
View 9 RepliesI am experiencing a consistent issue with Windows 10 where the computer runs okay, but then it suddenly freezes where I cannot do a thing. So I am not able to save my work or project I am working and lose all my data that I was working on. I then have to reboot the system to get Windows operational once again.
View 4 RepliesMy wife and I both have exactly the same computer - HP Touchsmart 620 - upgraded from Win 7. Our preferences include hiding the Language/Keyboard icon by customising the Taskbar & Start Menu options, and also turning off the touch screen function which now in Win 10 we can only do by disabling HID Compliant Touch Screen through device manager. Here's the thing, my customisations stay, but my wife's default back to showing the language bar and activating the touch screen after every reboot, even though the HID Compliant Touch Screen is still disabled in Device Manager.
View 1 RepliesWas away for two weeks. Upon return, could not find main user name or files. Tried to do a recovery to the last date it worked. I get a WDF VIOLATION and reboot. Cannot recover.
View 3 RepliesWhen I turn on my PC, it starts up but I just get a black screen with the circular arrow. It adds one dot about every 15 minutes. I select start>power>re-start and everything comes up fine. It is slower than Windows 7, which is annoying, but not nearly as much as having to reboot every time.
View 2 RepliesBought new motherboard, a new PSU tried loading win10 umpteen times from ISO ( same with win 8 + gen key ) I get this far all the time every time. Just won't go into Windows proper. All the fixes like restore/reset don't work.
I can get the command prompt > but don't have the expertise to know what I could type to understand why I can't progress into any windows OS
tried partition magic + hirens boots to completely wipe the drive then clean install windows have run memtest86, HDD tools, no bad sectors, oh mouse/keyboard are new too . Its only the CPU I haven't changed and that is nicely set at low temp, as in BIOS I've upped the fan to keep it cool.
Win10 Laptop, upgrade from Win7.
Every time I fire up my laptop without exception I cannot connect to the internet via WiFi.
Power settings are High Performance and the operating system doesn't switch off anything to save power. I never hibernate or allow sleep. It's either on or off.
The device and its drivers appear to be good, a list of nearby networks are displayed for me to connect to. On attempting to manually connect I get a message "Cannot Connect at this time"
If I then reboot the laptop it successfully connects to my WiFi network automatically without delay or errors and continues to maintain a connection.
When I shutdown the laptop I have the same problem when it is started, I have to restart it.
This same problem occurs with three different wireless networks I have access to.
Switching off the wireless adapter and back on again doesn't work. Switching off the router and back on again doesn't work, I have to reboot the laptop every time.
On all three routers the routers give the laptop a static IP address. The routers give me a different IP address though.
So I have recently had my Windows 10 laptop take longer than usual to boot up. When everything finally loads up, I check the disk used and it's always at 95-100% for about ten minutes, even though no particular program/process is running high. I've tried a couple recommended tricks (uncheck tips about Windows, disabled superfetch, turn off cloud-based protection in defender) and nothing as worked thus far. The computer itself is less than a year old, and I have plenty of hard drive space and RAM. I've scanned for disk errors, I've done a disk clean-up - and nothing has worked.
View 10 RepliesMy wifi worked fine until I installed the november update. Workarond by deleting the driver and reboot, didn't work. Tried another PciE card, but same problem.Previous driver HP 802.11 b/g. HP support does not show newer drivers.
View 2 RepliesI found that one can shorten the steps of shutting down windows by creating a shortcut on the desktop. by using this command "%windir%System32shutdown.exe /s /t 0" The shutdown exe file can be found in the directory above. I thought I may be able to create a similar shortcut but there is no 'reboot.exe' file in this directory so I assume it must have a different name. There are 4 files with the word 'boot' in it perhaps it is one of those.
View 9 RepliesI upgraded to win 10 today from 7. After rebooting my screen now shows windows wallpaper (one of their scenic view wallpaper) as I had a custom picture and it displays the date and time in the left corner. See attached picture. I have no cursor and the keyboard doesn't work. The keyboard and mouse light up like their connected properly but they don't work. Ctrl Alt Del does not work.
I've plugged them into other USB ports but I get the same result. I've booted into bios and the mouse and the keyboard work there. I've rebooted dozens of times to the same result. I also downloading the media creation tool to a USB drive and tried booting from that and repairing the OS but no result...
I have a gaming PC that I built about 18 months ago that runs like a tank except for this occasional lockup I get. It locks up entirely and then reboots shortly after. It's only been doing this for the past few weeks and I get no BSOD. Today I checked the event viewer and saw that it saved a memory. dmp file with more info but after trying everything I can not get windb to open the dmp file due to symbol errors. This board has a killer Ethernet adapter with garbage drivers that I think are my issue. The only issues I've had with this system over the past year have all been related to the killer Ethernet drivers. The system hang usually happens when I'm in a download client or leave something downloading for an extended time.
Gigabyte G1 Sniper Z87
i5-4670k
8gb corsair ram
2 X gtx 970's
2 Crucial SSDs
I occasionally (but frequently enough that it is noticeable) get an unresponsive start menu. When this happens Win+P for display switching also does not work. The start menu starts working after a reboot and only after a reboot. Obviously this gets annoying because of all the windows I have to reopen.What I've tried when the start menu stops working:
1. sfc /scannow - this doesn't show any errors
2. Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"} - the process finishes but the start menu doesn't start working anyway
I really hate restarting the PC when this happens.
I have installed one at the time, but after reboot it has reset back to default Windows theme, calling it "unsaved theme".
How do I get one theme to stay after reboot?
I elected to postpone the Win 10 upgrade for two days to allow me to save an image before installing the new OS. However, when the process requested a restart, I naively went ahead and to my horror, the Win 10 install was underway
As all too often in these situations, the install on my Dell Laptop (Win 7, Home Premium), stalled at 44%.
Hitting the reboot key had the install attempt to reinstate the original OS. This failed.
I'm presently in the situation where a reboot asks for the Win 10 installation disk, to enable a reinstall (I presume). Obviously I do not have an installation disk.
Not to be deterred, I attempted to reinstall a relatively recent Win 7 image using my Dell software recovery disks. Things seemed to proceed in an orderly fashion until at a point I received a blue screen of death a consequence of the disk software saving my computer from terminal damage (as if I wasn't terminally damaged anyway) .
Now, as we all know, at any given time there is incremental data on our disk that will be lost in any format, even in the event of a successful past image recovery.
I guess the question is this: If I were able to access a Win 10 installation disk, and use it, what is the likelihood of this screwed installation recovering itself in such fashion that I end up with a Win 10 OS and my data intact?
I've just bought a new SSD (Samsung EVO 850 250GB) for my Dell XPS 15 (L521x). After I inserted it into my laptop i intalled Windows 10 Home Pro. The installation process happened without any error, the laptop restarted several times (which is normal during the installation) and then booted to the desktop. again, no error whatsover. now, when i try to turn off or reboot my laptop, it is not able to power off automatically (i've waited for over an hour). so i have to power it off forcefully by pressing the power button for several seconds). if i want to reboot the laptop, it gets stuck at the dell logo, the little circle is spinning but nothing else is happening. i have updated all drivers, tried to boot into safe-mode, nothing worked
The current bios version is up to date (A16), SATA operation mode is AHCI, according to Samsung Magician (which i was able to install) everything is configured correctly.
