So apparently I need to update my chipset drivers because USBPORT.sys is causing DCP latency. How do I do this? Also is it risky like changing a bios? Will I need to backup/ reinstall?
View 1 RepliesJust installed windows 10. Everything is working good but there's problem with the sound. Sound driver is installed too but there's no sound output. I have installed the audio driver like 10 times and tried different versions as well but no result
View 1 RepliesI've just bought a little Gigabyte Brix 1900, but when installing Windows 10 I got an error saying:
"Windows could not update the computer's boot configuration. Installation cannot proceed"
It turns out that the unit needs a BIOS update to the latest version before Windows 10 can be installed. I just wanted to post this information here, as I imagine this will be a frustration to many others!
With a few workarounds, you can update the BIOS from within the Repair > Tools > Command Prompt options. Just be sure to download the DOS BIOS zip from the gigabyte website (which won't run properly, but contains the ROM), plus the Windows BIOS tool which you can then run from the command prompt.
I am building my first computer with windows 10 64-bit and I can't find the usb 3.0 drivers for my motherboard. Do the usb 3.0 drivers come with windows 10? here is my motherboard and the available drivers from asrock for my motherboard, I see everything except usb 3.0 drivers. URL...
View 1 RepliesI have a strange issue where after a full shut down in Windows 10, the motherboard is still delivering power to my connected devices such as my headset, keyboard, mouse and monitors i.e. all the lights on these devices are still on, whereas previously in Win7 they would all turn off.
I did an in-place upgrade from Win7-Win10 and adjusted no motherboard BIOS settings.
I've looked through the Win10 power options and can;t see anything relating to keeping devices on after a shut down. I assume this is so USB devices like phones and tablets can charge from USB when the PC is off? However I don;t need this feature if that's the intention.
Is windows 10 (vs win7) sending a different command back to the MB on a shutdown?
Hardware:
MB: Asrock P67 Extreme 6
CPU: Intel 2600k
BIOS Version/Date Phoenix Technologies, LTD ASUS M2N-E SLI ACPI BIOS Revision 0801, 25/04/2007.This is an older MB and I have installed Windows 10 as a fresh install now and its running nicely.would I be able in the future to install windows via a USB Stick as there's no option in the BIOS as a first boot device.This is in case I ever have a situation where I can't get back into Windows and need to reinstall my OS.
View 2 RepliesDo I really need to re-install 8.1 to see if it's a software issue? Because before I went to 10, it worked fine. But now in speccy and OpenHardwareMonitor, I am unable to get a reading.
View 5 RepliesI very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!
Reading this [URL] there is a troubleshooter which I have downloaded and run. According to that there are drivers for my HP 710C and D1460 printers waiting at windows update but it is not downloading and installing them.
I have enabled automatic driver installation and wu is set to automatic, yet no drivers.
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I've been planning on swapping out my motherboard for a new one. I've looked around and it has come to my attention that i would need to reinstall my Operating System. But it wasn't mine and i no longer have contact with the friend that let me use it. my question is, do I need the Disk that i used to install it? or any sort of key? and if so, are there any alternatives to get it cheaper? (my os is windows 10 and i used to have windows 7 before i upgraded)
View 1 RepliesSo I am going to upgrade from an a8-7600 apu to possibly an AMD 6 core cpu which will require a new motherboard since its an am3+ Ok so since I need to change motherboards and on this current pc i am on i upgraded my windows 7 to windows 10 does that mean I cannot use this copy of windows 10 when i change my mobo and cpu? I would have to buy a new copy of windows basically?
View 1 RepliesI noticed after a clean install of Win 10 Pro that in the Device Manager I had two "Standard SATA AHCI Controller" entries that showed the driver dated in 2006. I run 2 x SSD's a HDD and a BluRay writer.
So I downloaded the latest version of SATA drivers at the Asus ROG site for my motherboard. After running, one entry in Device Manager has changed to "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller" but the other remains "Standard SATA AHCI Controller" - still with the 2006 driver version 10.0.10240.16384 dated 2006/06/21
ALSO: The driver installed "Intel Rapid Storage Technology" program. Do I need this? If I do need it, must it be enabled at start up? I am wondering if it might conflict with Samsung's Magician which I also have installed?
I'm just wondering, once i upgrade my OS to windows 10, does that upgrade bind to my current motherboard and will only work with the motherboard it has been upgraded on only. I am asking this cause i am planning to upgrade these days, but i also have plans to upgrade my cpu during the next year which will ultimately require a new motherboard. So i just want to know if i can upgrade without worrying that once i change my motherboard that the OS will become invalid and that i will need a new one.
View 1 RepliesAs the question says. I want to upgrade my motherboard & CPU. Recently I got windows 10 update for free. & I heard that significant hardware change can deactivate windows. I don't want to go back to windows 8...
View 1 RepliesSo after some recent hardware problems I had to replace my mother board. I bought a different model than the one I had previously. I had previously installed a copy of Windows 7 and had it activated by a man on Craigslist who I assume had a membership or something because the key was legit. I later upgraded to Windows 10.
Now my computer is fixed and Windows 10 is installed but it will not activated because the OS considers this motherboard a "new device."Also, I do NOT have a key for any version of Windows and I would really rather not spend 100 dollars buying another copy.
I've clean installed windows, reinstalled all my drivers, and reset the bios but my computer is still performing slow. I went from a MSI FM2-A75MA-E35 motherboard to a MSI A55M-E35 one and from Corsair Vengeance 8 GB (2 x 4 GB) CMZ8GX3M2A1600C9 to Crucial Ballistix Sport 8GB (1 x 8 GB) BLS8G3D1609DS1S00. I don't believe there should have been much of a performance change because of the hardware so I'm thinking I probably did something wrong.
View 1 RepliesI don't really know whats going on but I wiped my old system, re installed win 7 and then upgraded to win 10 and now my oc motherboard bundle keeps failing. I can use the computer for 10 to 20 mins and then it powers itself down resets and comes up with a message saying the settings have failed, if I re load the profile and reboot the comp will work until I turn it off for the night and then the same problem following day.
The bundle worked fine since I purchased it at the beginning of the year and is oc through bios by overclockers uk so I thought it didn't make any difference what os I used....
breeze msi z97 intel i5 4690k @ 4.2 overclock bundle
16G Ram
Zotac 780ti sli
500gb Samsung ssd
win 10 64 bit
I currently have an MSI board with B150m chipset. I am changing it to Z170m from MSI. I have windows 10 and Ubuntu 15.10 installed in dual boot mode. If I change the board, would everything work fine? Would I need to do anything before?
View 1 RepliesFor the last 2 months since I got my new PC, I have been using my TV as a monitor for my PC. I had a few issues with resolution due to my TV overscanning the display but I used the resize feature in the NVidia control panel. However, yesterday when I downloaded Windows 10, it installed fine but when my computer opened up again it was trying to use my TV's native resolution which was a problem because of the overscanning. So I went to the NVidia control panel, and when I clicked the resize button (before choosing the new resolution) the TV just said it was receiving no input. Whenever I then tried booting my PC, it would display to my TV until Windows had loaded, then it would say no input.
The same thing happened when I connected to the TV through my motherboard rather than my GPU. So I spent ages trying to get it to work and eventually connected it to an old monitor. However the monitor only has a DVI input slot, which my GPU doesn't have, so I had to connect it through my motherboard and it worked fine. I then uninstalled all NVidia stuff from my computer, including the gpu from my device manager, and manually installed the new GTX 970 windows 10 driver from their website.
When this was done, I connected my graphics card to the tv through the HDMI, keeping the computer connected to the monitor through the motherboard. Both displays then worked as a dual display setup. However, even now whenever I try booting up my PC with only my gpu connected to the TV the same thing happens that was happening before and the TV will only display through the GPU when the motherboard is also connected to the monitor. I have ordered a DVI to HDMI cable so I can attach my monitor directly to the GPU, which will hopefully work, and then I will stop using my TV, but I would rather fix this problem and carry on using the TV until I can buy a better monitor.
I am currently running Windows 10 upgraded from Windows 8.1 Pro retail. Here's the deal: I am upgrading my system to Skylake, so obviously that means a new motherboard. I know if I want to directly install Win10, I have to get a new license ; but if I just reinstall my Win8.1, will I be able to perform the upgrade again ?
View 1 RepliesI had a pc failure, so i upgraded my motherboard and chip, as expected windows still booted from start with no issues, restarted to install lan driver, and when it fired up again i had the activate windows bottom right of screen, how do i fix this, I upgraded from win7.
View 10 RepliesJust upgraded to an MSI 970 motherboard and now windows 10 pro is giving me an activation error code along with a water mark in the right corner. I did the free upgrade from windows 8.1 pro to windows 10 pro back in late August.
Do I have to revert back to 8.1 pro now? Thought windows 10 was free for a year.
So my original motherboard (a G45 express chipset from 2007~) doesn't support overclocking, only supports LGA 775, and has a maximum of 300W. It needs replacing pronto. The thing is, the windows is a OEM copy, so the key is bound to the motherboard. Now I heard that if you phone up Microsoft and tell them that the old motherboard broke, and you bought a new one and now windows wont work, they often just give you a new code and disable your old code?
Will this still work in the windows 10 era? As soon as the old windows key is disabled will my current windows install just break? URL... So I just read that you swap the boards, install windows, and wait until it asks for the key
I am gonna upgrade my pc very soon and I am gonna switch pretty much everything except my hard drive. I am aware that I will have to re-install windows so I am gonna buy windows 10 home 64bit.
is it possible to upgrade my windows so I will keep all my files. I already have windows 8.1 on it so why wouldn't it work?
The PC freezes at random times. The GPU is EVGA GTX760 with i7-5930k CPU
View 7 Replies