So I'm wanting to start with a clean slate on my C: Drive (SSD) by blowing it all away and reinstalling windows. However I would also like to leave my D: Drive (HDD) as it is. Is it possible to do so without backing up my D: to an external drive as I do not have one?
As of my attempts so far the only options I have been given are the ones in my picture attached .....
How do I wipe my C: Drive but keep my D:?
My laptop became a bit slow and explorer crashes often. So, to clean install, I am guessing "Reset this PC" should work.
There are 2 options "Keep my files" and "remove everything". I have partitioned the hard drive space it to 4 local disks and installed windows 10 on C drive. I want only C drive to be cleaned and rest of the disks data to be intact. Which option to choose?
Additional Info: My laptop came with Windows 8 and I upgraded to W10. So I am hoping this reset option wouldn't mess with activation.
Is there a way i can do this without wiping the drive and loosing all my data my back up drive is on back order and i need to take my system to uefi.
View 1 RepliesI want to do a fresh install of Windows on my new SSD and wipe everything off my current hard-drive. The reason why I want to do this is because my new SSD arrived and my drivers are a little bugged and I want to start over.
[URL] ....
That's the thing I'm going to be using^. I already have it on a CD.
So do I just plug in the SSD, then set the primary boot device to the CD? Then install Windows 10 64-bit to the SSD? That's it?
Also, how am I going to wipe my current hard drive?
W10 has replaced my W7 operating system and I really like it. However if I have a main hard drive failure or somehow get in a situation where W10 won't start, how can I reinstall windows 10? What do I need to do before something like this happens?
View 5 RepliesSo i have 2 hard drives, one new and one beginning to die on me. I have windows on the dying hard drive, and do not have the original disks or product key. I tried using DriveImage XML to copy everything onto the new drive, but for some reason when it boots it says "Hard disk failure" when i have the just the new hard drive in there (i am 100% sure it is plugged in properly). I really dont have the money to buy a new windows disk, and so i was wondering if it would work if i were to factory reset my computer and have windows 10 reinstall on my new hard drive, or is there an easier way?
View 1 RepliesWhen I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesI have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 RepliesI have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 RepliesI currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 RepliesMy laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
Basically, I plan to disconnect every other Drive from my computer (my 2nd SSD and the HDD I use for data storage). From there, I'd do a clean install of Windows 10 onto my SSD.
Will that SSD become my C Drive by default (I want it to)? Will is stay that way when I reconnect my other drives provided I continue to boot from my SSD?
1) the HD in my laptop was dying, so I ordered a replacement, and tried to create a recovery drive so that I could reinstall Win 10 when the replacement arrived
2) Windows asked me to use a drive of 16 gigs or larger for my recovery drive
3) since I didn't have any USB flash drives of that capacity, I used an old, 40-gig IDE drive (IBM Deskstar) that I connected to the laptop via the USB port; at the end of the process, Windows claimed that the IDE drive had been successfully formatted
4) the replacement HD arrived; I inserted it into the laptop and re-connected the IDE drive via USB
5) when I turned the machine on, it seemed to recognize that there was a drive plugged in at the USB port, but it did not seem to be reading the relevant information on the drive: I got a menu with several options for installing/re-installing Windows, but when I tried various options, the computer did not recognize any "source" from which Windows could be reinstalled.
What I should do? The IDE drive has many possible pin settings (master, slave, etc.), of which I have tried several so far -- which setting(s) should I be using so that the computer is able to properly read the drive?
I want to prepare my desktop before selling it and wipe all personal data. I am aware of tools like DBAN which would wipe out the entire disk including Win 10. I would prefer not to do that.
On a related note - my desktop is HP - came with Windows 7 - has the disk partitioned to C: and Recovery Image D:. If I do wipe out the entire C: drive, how exactly will I be able to recover Win 7 from D: ? It won't boot, right?
So i have 2 hard drives. one is an old one with windows 7 still on it, and the other was new with nothing on it. I took out the old one with windows 7 on it but didn't wipe it, and put in the new one. I installed windows 10 on the new one via bootable usb. Now windows says it can't activate. I've already downloaded 100gb of games and i REALLY don't want to do that again.
How can i get the new hdd to activate windows without wiping it? will the product key be the same for both versions? Can I update the old drive then swap it out with the new one and it be activated?
OK, so, I finally got the install for Windows 10, and boom, it restarts into it's happy special circle with a percentage, explaining that it's this many percent done, I step away, and when I come back a couple minutes later..
View 1 RepliesThe calendar continues to wipe clean the previous months dates. It will retain things like government holidays but anything I input is erased. This is frustrating because I often need to look back to see when something happened and if the calendar erases these dates it is worthless..
The app is connected to an outlook account. How to make Windows calendar stop doing this?
I currently have windows 7 on my 1TB hard drive and have recently bought a new 256gb Crucial SSD (but not installed it in my desktop yet).
I bought the SSD to be able to install games onto it so they load quicker but also if possible to have my OS booting from it so my computer loads quicker from switching on.
Someone put me onto the idea of using a program called Steam Mover to be able to move games from my HDD to the SSD without having to uninstall them and then re-download them direct to the SSD. I understand this can also be used for other programs like photoshop etc too.
I want to upgrade to Windows 10 but don't want to have to do a clean install and lose all the programs that i currently have installed such as Photoshop, Office, iTunes etc. Is it possible to somehow upgrade my OS on my HDD but then actually boot from the SSD perhaps by using the Steam Mover program?
If not, do I just have to bite the bullet and accept that I will either lose or have to reinstall a number of programs to my HDD? I do have a second 1TB HDD which is empty at the moment in case its needed for cloning files?
So i just finished building my new pc and im installing windows 10 on it and i added this old hdd for extra space from my old pc but it has windows 10 preview build on it and the whole filebase from the previous pc. How to wipe the old OS and all the stuff on it? Do i just format it or do i have to do something else? will it mess with my pc since im installing the new windows 10 on an ssd but the hdd has the preview windows on it so basically two copys of windows....
View 1 Repliesi was wiping down the keyboard and i deleted the icons i had on the desktop including recycle bin . How do i get it back. [URL] . i tryed Restore Missing Desktop Icons in Windows 7, 8, or 10
View 9 Replies