Just upgraded my Win 8.1 Pro 64-bit to Win 10, and Event Viewer shows literally hundreds of Errors and Warnings. My 8.1 was almost error-free. What gives? Can I re-do the upgrade and try again?
View 8 Replies
For the past few weeks I've been seeing errors in the Event Viewer relating to the LockScreen. These only happen when waking the PC up from Sleep mode. The errors are:-
5973 Activation of application Microsoft.LockApp_cw5n1h2txyewy!WindowsDefaultLockScreen failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
and
1002 The program LockApp.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
Process ID: 133c
Start Time: 01d16111867ebe61
Termination Time: 4294967295
Application Path: C:WindowsSystemAppsMicrosoft.LockApp_cw5n1h2txyewyLockApp.exe
Report Id: e6af0181-cd07-11e5-9cad-6c626d3ed397
Faulting package full name: Microsoft.LockApp_10.0.10586.0_neutral__cw5n1h2txyewy
Faulting package-relative application ID: WindowsDefaultLockScreen
I recently re-installed W10, and used Kari's tutorial to move the Users folder to a partition on another disk, using the sysprep routine.
This is a list of W10s Environment variables that apply to my account (MS/user/admin):
Those that relate to my account all seem to be pointing to the right location (H:Users).
However, until I turned off 'Sync my settings', the event viewer was littered with errors regarding ESENT--Extensible Storage (database) Engine, recorded multiple times per minute in an infinitely repetitive sequence: Events 494, 454, 488 & 413. The 494 event is the trigger:
SettingSyncHost (2876) {068B89D8-0F81-40D5-A335-0959E66CAECB}: Database recovery failed with error -1216 because it encountered references to a database, 'C:UsersomnesAppDataLocalMicrosoftWindowsSettingSyncmetastoremeta.edb', which is no longer present. The database was not brought to a Clean Shutdown state before it was removed (or possibly moved or renamed). The database engine will not permit recovery to complete for this instance until the missing database is re-instated. If the database is truly no longer available and no longer required, procedures for recovering from this error are available in the Microsoft Knowledge Base or by following the "more information" link at the bottom of this message.
Any way of directing the SettingSyncHost process to the right location? The drive/partition label (C:) should be H:, but otherwise the path is correct, and the db file (which is a hidden, system file) exists in that location.
It's not a problem for at present, as I don't have any devices that use that account, and have turned off 'Sync my settings' via Account settings; but it may be in the future, and may also be an issue for those who have moved the Users folder and have devices that give them that syncing feeling.
Incidentally, virtually all references in the MKB describe permissions rather than location problems, and the "more information" link in Event Viewer (Event Log Online Support) provides no information (Page Not Found).
How can I construct a .bat file to clear entries in the event viewer.
View 2 Repliesmake the "Clear All Event Viewer Logs using a BAT file" self starting such as making it run automatically on a daily basis or show me what code I would need to add to it to do that for me. I would just love to clear out the 10016s and 7031s codes daily.
View 2 RepliesI'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in.The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user XXYY SID (S-1-5-21-1462133472-353174448-3584519177-1002) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I've tracked the AppID down to RuntimeBroker. I've found a few posts mentioning a similar error for this application under windows 8, and suggesting changing the security settings as described. When I try to do this though, all the settings for RuntimeBroker are disabled, and cannot be customised. I've tried launch the admin tool as administrator, but it's still locked down.
I fnd that I have the same error message appearing at about 10 second intervals (on one occasion over 21000 were logged). Details below:
Log Name: Application
Source: ESENT
Date: 22/01/2016 15:32:30
Event ID: 490
Task Category: (1)
Level: Error
[Code] .....
I recently started getting this error in event viewer. There are a number of threads across the web about it, but none of them has presented the solution. The error is related to Runtimebroker.exe.
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
diagnose the kernel power event id 41 error I've been receiving. Upgraded to Win 10 on day 1 of launch 7/29 which the Event Viewer tells me was the date of my very first kernel power related crash.
I've updated most of my drivers by now and while the crashes are now less frequent, still occurring about once a day
I continue to get this event in the Event Log under Audit Failure. I never had in Windows 8.1 and it started after upgrading to 10.
Cryptographic operation.
Subject:
Security ID:SYSTEM
Account Name:xxxx
Account Domain:xxxx
Logon ID:0x3E7
Cryptographic Parameters:
Provider Name:Microsoft Software Key Storage Provider
Algorithm Name:RSA
Key Name:51a92691-66f1-280f-d0db-59fad4f73491
Key Type:User key.
Cryptographic Operation:
Operation:Open Key.
Return Code:0x80090016
I have an Windows 10 Pro. I want to know what caused this. Task manager and event viewer was not responding and some of the applications stop responding. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.
My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.
Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. It was related to windows/software or hardware?
I just got a Driver Power State Failure Bsod. Please find attached the dump files.
Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.
Checking Gigabyte for an update to the audio drivers.
No new driver on the Gigabyte site. Will reinstall.
My PC is often waking from Hibernate or sleep mode and I'm struggling to work out why. Is there a way of finding out what the cause is in event viewer?
View 1 RepliesRecently installed Office 2016 and it works fine, but i notice an Event Viewer error
SideBySide 35
Activation context generation failed for "C:Program Files (x86)Microsoft Office
ootOffice16lync.exe.Manifest".Error in manifest or policy file "C:Program Files (x86)Microsoft Office
ootOffice16UccApi.DLL" on line 1.
Component identity found in manifest does not match the identity of the component requested. Reference is UccApi,processorArchitecture="AMD64",type="win32",version="16.0.0.0". Definition is UccApi,processorArchitecture="x86",type="win32",version="16.0.0.0". Please use sxstrace.exe for detailed diagnosis.
This error started happening only on computers with 1511 installed. The original RTM of Windows 10 doesn't do this, nor do Windows 7, 8 and 8.1. I tried some Google searches but all I see are relevant to 7 or 8, not Windows 10. It must have been something changed between RTM and 1511 that did it, too.
When I refurbish computers for our employees, I wipe the hard drive completely (either diskpart "clean" via the recovery shell, or using DBAN to wipe the partition table if I can't get into WinRE.
I then boot it up using network boot. We have a Windows Deployment Services server set up so we can install Windows using PXE. I put the Windows 10 Enterprise Version 1511 .wim in there and it installs fine.
After install I make a local account, make sure the drivers get installed automatically (so far, it's been auto-magic for all our hardware, even NVIDIA and AMD graphics cards), install antivirus + MS Office and whatever special software that employee would need, and then I name the machine and put it on the domain.
To prevent extra crap from being created in C:/Users (and in the registry) I don't log in with a domain account. I let the employees do that themselves.
The first time any domain account* tries to log in, it errors after about 20 seconds with
Code:
Windows couldn't connect to the System Event Notification Service service.Please consult your system administrator.
If they put their password in again, it goes through and all the initial settings are applied from our Group Policy Objects.
*I noticed that if I log in as an account which is a Domain Administrator (and via our GPOs, is also added to the Administrators group on the machine), I don't get that error. It only shows up for "normal" users which are not part of admins.
Nothing critical by any means as it will always work on the second try, but I'm really curious why it happens at all. What service is it even trying to connect to? The fact it happens on literally every computer (it even happens in VMWare images which I've done to test GPO settings) would imply it's not a problem with a particular machine, rather something in our domain. Or it's possible there's a GPO that was set years ago for Windows 7 that didn't cause any detrimental effects until now.
I had fresh clean install of Windows 10 Pro in MBR scheme . I want to know what caused this.Task manager and event viewer was not responding and some of the applications was not responding too. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. Thx. It was related to windows/software or hardware?I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86, Windows Diagnostics Memory and hdtune showing no errors. Maybe try GoldMemory or that will be waste of time?
I have an SP3 running Windows 10. Finding this continuous error in the event viewer?
DistributedCOM
Event ID 10010
The server {7006698D-2974-4091-A424-85DD0B909E23} did not register with DCOM within the required timeout.
I looked up the ID in the registry and came up with a REG_SZ, REG_DWORD, and REG_BINARY. One of the descriptions said "Out of proc server to enable Insider Hub and Feedback App scenarios to be reached from inside of its appcontainer".
I've had Windows 10 since August, and for the most part, things have been going relatively okay. My only real glaring problem with the OS is that I can no longer here a sound during a system event. By that I mean the usual sounds like when you're clicking through the Explorer, emptying the recycle bin, a dialog pop-up and such.
My system is a Dell Inspiron N4100 that was previously running Win7 Home Premium, and now I'm running Win10 Home Edition. The sound in general works fine; like media players, games, and through the Internet browsers. It's only the system sounds that refuse to play.
I recently decided to upgrade from Windows 8.1 to Windows 10 and reserved my upgrade. I got my notification recently and started to update today.
But for some reason the update wouldnt Install and it kept giving me errors and saying that another update was in progress even though there was none.
I was confused so I decided to restart my computer only to arrive at a screen saying "keep your PC on until this is done. Installing update 1 of 1"
It has been stuck on that screen for 2 hours and im not sure what to do. My HDD indicator light is flashing but not very often.
I finished upgrading to Windows 10 today. I looked at various features for a while. Then I Looked at the Event Viewer--Administrative Events. The following errors were logged:
Event ID = 513, 24583, 8229, 1, 3041, 17207, 3041, 17204, 131, 69, 131, 1002, 5973, 69, 10016 plus others.
Most of the errors were logged multiple times. Most of these errors were present on Windows 7 Pro from which I upgraded so they are not unique to Windows 10. I was hoping they would go away with the upgrade.
So when the th2 update first became available i updated and was getting daily BSODs i went through and checked everything some were saying it was most likely memory corruption. I rolled back to see if it would stop blue screening and it did was stable for a few months. I figured Nvidia or most drivers had to be compatible by now and i wanted some of the bug fixes from 1511 so i updated again using an msdn ISO i had access to. Since then daily Blue Screens are reoccurring, I don't know if i buy that my hardware has gone bad as it's 100% stable under base Windows 10.
I can add a link to the .dmp file later tonight when i get home but for now I will include the descriptions of the BSOD.
CRITICAL_STRUCTURE_CORRUPTION
Ntkrnlmp.exe
I was remoted in from work and ran an SFC /SCANNOW it found nothing then the PC BSODd again so i can't upload the dmp file till tonight.
While installing windows 10, I am getting errors C1900101-20003
View 1 RepliesBit of background: Was getting 8024601 errors when attempting to upgrade with the Windows Update method. It would start installing, get to 85% before stopping for a while. Then it would finally reset, only to boot up win 8.1 and Windows update would have the above error code for the attempt.
So I decided to try the Media Creation Tool instead. I select the option to upgrade this PC, it downloads fine, and everything goes okay until it wants to reboot my machine. Tried it twice, first time it sat there waiting to restart. It never did, no programs exited, didn't log off or anything. Second time it gets to the same stage, but locked up my computer instead.
The only constant errors I get when I reboot are these four, that all share the same ID of 7031.
The Contact Data_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The Sync Host_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The User Data Access_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The User Data Storage_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
Is there anyway to fix these, or better just leaving them be?
How to track services via eventlog name in cmd.so the main problem is I can't seem to find these services on services.msc ... I want to know how to track these services via cmd, how I don't want you guys to tell me what type of service is this i want too know how I can track this own my own?
View 9 RepliesI open calendar and click on the "+ New Event" button on the top left and... nothing happens. In fact, I can't do anything other than move the view around. What on earth am I doing wrong?
View 4 Replies
