I installed Win 10 on a new pc I built. Its working ok except twice when I turned the pc on all the icons had shifted to the left side of the monitor screen. Normally I group the icons into groups that are alike. When they snap to the left it is a mess. Is this a problem with Win 10? Is there a way I can get them back to groups without doing it one icon at a time?
View 2 RepliesEvery time I open a folder with enough files to require a scroll bar, the view snaps back to the top after 10 seconds or more. I have turned off the color option and the wallpaper option.
View 3 RepliesBrand new Windows 10 Pro (64 bit) Dell Desktop.
Replaced old XP system (which ran like a swiss watch).
If I turn off the monitor (which I do every night as I need the computer on 24/7) when I turn it on all the desktop icons have moved back to the left.
This DOES NOT happen on a reboot or a shut the computer down and turn it on.
Medium icons, all power saving is turned off, auto arrange icons and align icons to grid are both unchecked.
Desktop Icons move back to the left (default) side of the screen after customizing. this happens when the the computer is put into sleep mode and is woken up or when the monitor is turned off and turned back on. I upgraded to windows 10 Pro 64bit from windows 7 ultimate 64bit. This problem never happened with windows 7.
-Automatic Sleep mode is turned off - when I manually put computer to sleep mode and wake it up the icons are rearranged
-Automatic turn off monitor has been deactivated - when shut off my monitor but keep my computer on and then turn back on the monitor the icons have rearranged
-I have small icons setting
-Auto align icons has been deactivated
-allow themes to change icons has also been deactivated
My Computer:
LG 34UM65 - 21x9 - 2560x1080p resolution
AMD 9590
Asus Crosshair V Formula Z
Gigabyte HD7970ghz
Corsair Platinum Ram
WD HDD
Samsung 850Pro - Windows 10 is installed on the SSD
My Drivers are all up to date. and Motherboard Bios has just been updated to 2201
I upgraded to Windows 10. The entire screen shows up in about 75% of my monitor with the rest black. It's not that the fonts are too small, it's just that it makes my monitor look a lot smaller and I cannot seem to get it to fill up the entire monitor like Windows 8.
View 1 RepliesAfter tonight's updates, this morning I've seen that Store and Edge's icons are white square.When last night I turned off the PC I noticed there was an update and this morning a page of Edge, What's new (get started), opened and the icon on the taskbar was a white square. Then searching for an app in the store I saw that the icon was the same: a white square. (see the screenshots).I did a "sfc / verifyonly"
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>sfc /verifyonly
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.What can I do now to restore that icons?
So my Surface 3 updated itself yesterday, and when I woke up today the majority of the icons I had pinned to my taskbar and my start menu are gone. I've been able to find and pin programmes like "Weather" back to the start menu, but others have completely disappeared, most frustrating of all is Edge.
I can open Edge if I open Cortana and select a news item. When I do that Edge opens full screen, but doesn't deposit an icon on the task bar, so I can't select it. Also, when I swipe in from the left or choose Task View, Edge does not show as an available programme. Changing in and out of tablet mode does nothing.
Also, my PC is just fine.
My screen won't fit my monitor, the time on the bottom right is off my screen. It's like its zoomed in too much. Specs: AMD r7 260x AMD fx-6300 Not sure if anything else matters.
View 1 RepliesI can't remember when and how this started, but definitely after upgrading from Windows 8.1 to Windows 10 Pro.So, my screen (Acer LCD, connected to GTX 560 with 1 meter DVI cable) started going black (power light on, background light completely off) when I watched a video that had lot of dark on it. Happens in some games as well where the cut scenes change.
I tested it by full screening a plain black image and the screen went to sleep, mouse cursor dissapeared.Moving the mouse does not wake up the screen, only when i press Win key to bring up some color to the screen. (the task bar seems to be enough to wake the screen.)I have checked all the power settings and turned off all the sleep settings, 'Turn off display after' is set to 'Never' 'Multimedia settings' are set to ' Prevent idling ' and 'Optimize video quality'
For some reason I can't seem to figure out I can not change the size of the screen on my monitor. I have tried everything in personalization and display settings. Nothing is working. I have looked online and can not find answers there either.
View 5 RepliesI upgraded to Windows 10 from Windows 7; the image that is displayed has never fit the size of the monitor (technically it's a TV, but whatever). I always would use Nvidia Control Panel to resize the image to fit the monitor, but it wasn't updated for Windows 10 (or 8 for that matter), so there is about an inch border of the screen that I can't see. I have a Nvidia GTS 450 graphics card. I was wondering if there is some way that I could resize the image or not. I also tried to go under display settings, but for whatever reason, the section where I can change the resolution is greyed out.
View 1 RepliesI cant change the size of my screen to fit my monitor! ive looked everywhere it just keeps taking me to resolution size......
View 1 RepliesI have an AMD 6670 and I just upgraded to Windows 10. At first I couldn't set my resolution back to 1920x1080 but I downloaded the driver and now I'm able to. The issue is that when I set the resolution, it's like everything is stretched out. The taskbar is off the screen on the bottom and same with the icons on the top and sides of the screen. I can see the very top of the taskbar at the bottom, but not enough to click on start or choose any programs that I have open.
View 1 RepliesI just updated to Windows 10 and already having problems. I have a dual monitor setup and back on windows 8, both monitors had a good display. Now on windows 10, my main monitor has a blurry or less quality compared to my second monitor. It was always fine until I switched windows.
View 3 RepliesI have a acer Z5600 and use an acer AL1916W as an additional monitor which worked fine with Windows 7, since I upgraded to windows 10 my second monitor does not work and my main screen just goes black.
View 3 RepliesNow have two 1" black bars on monitor. Am not a computer wizard - just switch and use ...
View 2 Repliesi upgraded my windows from 8.1 to 10.evrything seems fine but when i launch my games it won't run.i run dxdiag then i noticed that my intel vga and nvidia 840M's driver were uninstalled. I open the ASUS installer and installed my display driver.when i reboot, the screen goes black with the mouse cursor in it after ASUS logo.3 leds were lit.the hdd led is blinking. i reboot several times and hit F8, unfortunately nothing happened.
View 1 RepliesI have the new Acer Aspire laptop and a TV which I use as a monitor. They have worked together very happily some time now. But yesterday I had to do a forced shutdown when the start button would not work and the TV screen shrank in size and there were error messages. When I rebooted, the TV monitor stayed black and a computer screen came alive for about 10 seconds as it was rebooting, then went black. I disconnected the TV from the computer and started her up and the computer screen behaved itself.
Even if I set all of the display parameters to indicate only one screen (the computer screen), if the TV monitor is connected to the computer, I end up with two black screens.I have tried many display duplicate and extension.No new software installed.There is one clue. I disconnect the TV monitor from the computer, boot up, choose duplicates to display. Then I connect the TV monitor to the computer. What happens, for about one second, is that both screens light up.
It seems like it is not detecting my second HDMI monitor. I did see that this was an issue previously resolved, but my predicament is a bit different. I use my second monitor as the primary due to the laptop monitor not working. As it is, I have been sitting for close to an hour on a black screen due to my main monitor not being picked up and no way to visually walk through to make it my primary again... If that is even the only problem. Are there any ways I can switch to my main monitor (2nd monitor) worth no visual representation whatsoever?
View 2 RepliesI am running Windows 10, and trying to calibrate my monitor which is the #1 monitor on a dual monitor setup. I am using the Spyder 4 Express for calibration.
When I put the calibration device on my #1 monitor and go through the calibration process, it saves the new profile, but the new profile does not correct the #1 monitor, it is effecting the color of the #2 monitor.
Without any third party software: Can I with Windows 10 set new windows to open on the monitor (with dual monitor setup) from which it was launched?
By default Windows opens a new window on the monitor on which it was used last. So if I close file explorer on monitor 1, the launch it from monitor 2's start menu, it will still open on monitor 1 because that is where it was last active, even though I launched it from monitor 2.
I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:
- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options
- plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal
- plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV
- reinstalling nvidia and onboard-graphics drivers and update to the latest
- Made a clean install of windows, tried windows 8 also but the same result
- Updated my BIOS and EC
- Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable
nothing works
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 RepliesFreezing, black screen, no cursor, monitor goes to sleep, computer still running after upgrading to Windows 10 from Windows 7. Must manually force computer shutdown. HP desktop.
View 1 Replies