Install Error 0x80300024 On Secondary HDD
Jul 6, 2015
I am trying to install the latest Windows 10 Technical Preview build (64-Bit) on my secondary HDD. I have Windows 8.1 Pro (64-Bit) installed on an SSD. I have a 1 TB Seagate HDD that I use to store games. I made a new 146GB partition on that HDD where I want to install W10. Each time I try I get the error 0x80300024. I've tried reformatting, I've tried a smaller partition that left extra space on the hard drive, etc. I'm installing using a bootable USB 3.0 flashdrive.
View 1 Replies
Similar Messages:
Aug 31, 2015
I have two hard drives in my pc. One is a small ssd for windows and the other is a large HDD for all of my programs and games.
I want office to be installed on my HDD. I bought office and downloaded the setup file but when I run it, I get no options or anything.
As soon as I open it it installs office to my ssd but I want it on the HDD. How do I install it on my HDD?
View 1 Replies
Aug 4, 2015
How to fix this error using windows 7 64bit...
View 3 Replies
Aug 12, 2015
I wanted to make an image of my machine since upgrading to Windows 10 and saw it kept on including my secondary drive (which has over 600 gigs of movies). I am not able to uncheck it.
I figured what the hell and disconnected the drive.My box will not boot without the drive!
I just built this machine back in December and I used a 500GB SSD for my main drive, while I have 2 regular HDD's for storage and movies.
I turned off, "hide protected operating system files" and found the folders "Boot, Recovery, System Volume information and $Recycle Bin" all showing up!
how this drive got dragged into the install, but I certainly do not want my main drive depending on it to boot.
I don't want to change ownership of the files and delete then manually either since I have a strong feeling it will kill my system.
how to go about "unlinking" these 2 drives?
View 9 Replies
Oct 22, 2015
Windows recognizes my secondary drive, a Western Digital, SATA WD5000AAKS 500 gig. However, anytime I access it the system lags, files freeze and it acts like it's being re-cataloged. I never had this problem prior to Windows 10, and my other computers have no problem accessing the secondary drive through the Home Group.
View 2 Replies
Aug 8, 2015
i have dual monitor setup for windows 10. but when sleep mode on, after wake up the PC only the primary monitor is waking up. other monitor not working.
It was ok when i was using windows 8.1. but it causing problem after windows 10 installed. I already updated all drivers including display drivers.
View 1 Replies
Nov 28, 2015
During startup of Win 10, the options given to proceed with include Windows 10 and System Restore.
I now have Win 10 on one of my laptop's internal 2.5" HDD. And I've restored to Win 7 (home premium) on my other 2.5" HDD that sometimes is temporarily in the bay of the internal drive that Win 10 is now running on.
With one of those drives in the 2.5" usb HDD enclosure, how can give the Win 10 startup window an optional link that can open and run Win 7 of the plugged in enclosure. IOW, can the startup screen be tweaked so that I can avoid temporarily putting the Win 7 HDD in the internal bay in place of the 2.5" drive that Win 10 runs on (to run Win 7 on the external drive)?
View 4 Replies
Aug 3, 2015
I have windows 10 pro 64 bit. I am running a 120gb SSD for my OS and a 1.5TB HDD for media and games. Whenever I put the computer in standby or sleep mode the HDD is not recognized when the computer wakes up. Upon restart the HDD is recognized and everything is groovy.
View 1 Replies
Aug 17, 2015
I just did a fresh install of windows 10, and I have decided to try and start with a better form of organization. I want to try and keep my SSD with my OS on it as clear as possible. By doing that I wanted to keeps all my pictures and documents, videos, etc on my second hdd.
That is simple enough. What I want to know is if there is an easy way to have it set so every time I add pictures or music it stores on the secondary drive and still shows up in my "Pictures" file. How do you organize?
View 1 Replies
Nov 18, 2015
I just updated to build Windows 10 pro 1511 and i get the error 0x80070005 when i try to install facebook readiy from the store, i have rebooted and followed this link but i am still unsuccessful, trying to avoid a system restore...
View 3 Replies
Jun 29, 2015
Why do I get the error (0x8042081f) while installing on my Lumia 720? Just need proper solution & answer for this problem, that's it....
View 4 Replies
Sep 14, 2015
I was unable to update AVG free due to an error. It said that something was being installed (there wasn't though) and it had to be finished first. I got the same error when trying to uninstall it so I had to use an AVG tool to force remove it from my system (I had this error for days before removing it so a restart did not work). Now I don't have an antivirus on my pc and I get an installation error when trying to install it again. Instead, I tried Panda free this time. Error. So I'm thinking it's not the antivirus, it's something in windows 10 that's malfunctioning but I don't know what.
View 1 Replies
Jan 13, 2016
So, my hard drive recently went out on my computer. I'm broke, so I pulled a hard drive out of an old computer my friend gave me a couple years ago. That hard drive has a non-genuine copy of windows 7 ultimate edition. The previous hard drive had Windows 8.1, and I have a valid product key for that, so I figured "Eh, what the heck. I'll just install 10 and use my Windows 8 product key to validate it for the free upgrade."
Now, the problem becomes that the copy of windows 7 on the hard drive is 32 bit, and the rest of the computer is built for a 64 bit OS, and I don't like the idea of not using the full capabilities of my system. I've got 8GB RAM in here. Only using half of it feels horrible. So I'd like to get 64 bit Windows 10. I went and downloaded the iso through microsoft's media thing, then burned it to a DVD5 using a separate tool called imgburn.
However, when I boot to the DVD, the blue, flat windows logo shows up, it hangs for awhile doing nothing, the spinning dots show up, then it immediately crashes, giving me a blue screen.
The blue screen has the frowny face and the "Something went wrong" and the error code 0xc000021a. A bunch of googling shows me a whole lot of problems with the system on boot, but nothing at all related to installing windows 10 and getting that error. Microsoft's site has been less than useful, only telling me that there was either a problem with WinLogon.exe or csrss.exe, with no information about how to trouble shoot that problem.
I've tried making more copies of the disc (I'm out of DVDs now), and I redownloaded the iso and switched burner programs for the final disc.
View 1 Replies
Jul 30, 2015
I have disable system protection on my primary (C:) which is an SSD.
When trying to enable system protection on my 1TB HDD (E:), the option is simply greyed out.
I had hoped to save writes on my SSD to increase it's lifespan, and it appears to be recommended in various SSD optimisation guides. Is it at all possible to enable system restore points to be saved on other hard drives?
View 3 Replies
Jul 30, 2015
I upgraded from Win 7 Pro to Win 10 Pro yesterday and so far everything works great, the only problem is that my secondary HDD always stays on. I have a 128GB SSD as my main drive and an 750GB HDD as my secondary drive for games, pictures and stuff. Since the latter runs at 7200rpm and is quite loud and my laptop is otherwise pretty much completely silent (when I turn the fan on stealth mode) I had created a power profile for studying that turns off hard drives after 1 minute of not using them and with windows 7 that worked just fine.
Now though, my secondary HDD never turns off. I checked task manager and resource monitor and found that my pagefile was on my secondary so I moved that to my SSD, but now it still doesn't turn off, even when Task manager and resource manager tell me nothing has accessed it for several minutes.
View 7 Replies
Aug 23, 2015
My PC has three hard drives. A Samsung solid state drive (840 series) that has windows and all games / programs on it, and two older Samsung HDD's (HD753LJ, about 7 years old) that I use to store videos, photos, music etc. It had been working fine in this configuration with Windows 7 for years.
I recently upgraded to windows 10 (in place upgrade, not a clean install) which worked OK except one of the two HDD's was not found by Windows 10. After a couple of turn off / turn back on cycles it found it and was OK for a little while. However it stopped finding it again and now hasn't worked for a few weeks.
If I boot into BIOS it lists all three hard drives as boot options, but only two come up in disk manager / device manager / my computer within Windows 10. Is this a Windows 10 problem or is the hard drive dying? (The timing would be very coincidental if it's not a windows problem).
View 2 Replies
Oct 15, 2015
I'm booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
all that's plugged in is the ssd, monitor, ram, and keyboard/mouse
View 1 Replies
Dec 23, 2015
So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
[URL] ....
View 9 Replies
Aug 29, 2015
When installing Google Earth , I get the message "error 1603". I tried many times to (completely) uninstall then reinstall GE, with the same result.
View 4 Replies
Aug 12, 2015
Just found myself diggin' more and more in bugs and troubles in Windows 10. Now, when I'm looking for updates with Windows Update it shows me that the Updates cannot install and to check it out later, and then gives me an error code: 0x800705b4.
I don't know how to fix this, I have been looking for this error code in the gigant sea of the Internet but nothing. I'm growing tired of Windows 10 Mountains of Bugs. I know it's still not finish and it's never ever gonna be finish, but this is just too much, adding that I'm with the people who cannot download/update apps from the Store and cannot open the Mail/Calendar/OneNote apps.
View 5 Replies
Jan 3, 2016
For some reason Windows 10 keeps failing to install updates every time, worse yet it won't give an error code .
View 1 Replies
Jan 22, 2016
I bought new parts on 14th of Jan (i5 6600k, Asus Maximus VIII Gene, Corsair Vengeance LPX 2x4gb 3600 mHz). Swapped them with my old i5 760, Gigabyte motherboard and 8gb RAM.
The day after I installed my new components, Windows prompted me to activate Windows (apparently a new motherboard counts as a new computer thus a new license required). I ignored it, installed all the new drivers for my motherboard and CPU (Realtek worked fine BTW). 2 days later I couldn't stand the "Activate Windows" thingy at the bottom of my screen, so I decided so sacrifice my money to Microsoft to buy another license of Windows 8.1 Pro.
Installed Windows 8.1 Pro via USB (erased all data on SSD first) and upgraded to Win 10 from there.
So there I was on a clean Win 10. Used Ninite to install most common Apps, and went over to my motherboard's driver page over on ASUS's website. Downloaded the Realtek Audio Driver from there ((4.35) 6.0.1.7629), and tried to install it.
While I find the Realtek installer really outdated and janky, it normally works. The installer showed up and began extracting all sorts of files (mostly .dll files), the big blue window in the back popped up and after a while the message "InstallShield Wizard is installing..." popped up. It was then when I received the message: "Install Realtek HD Audio Driver Failure !! [Error Code : 0xE0000234".
So it's listed between Programs and Features, and I can also find it in the Device Manager, Under "Other Devices" as "Unknown Device". When I double click that the status reports:
---------------------------------------------------------------------------
The drivers for this device are not installed. (Code 28)
Driver is not intended for this platform.
To find a driver for this device, click Update Driver.
----------------------------------------------------------------------------
Clicked "update driver", manually searched for the drivers in the extracted setup folder, didn't work.
View 1 Replies
Dec 29, 2015
I have Windows 10 installed on my SSD primary drive. I also have a 4 TB RAID 10 array that I want to remove to reutilise the disks in my new NAS. However...
If I remove the drives, windows won't boot. I've seen various errors, but basically it loads to logo, spins round and round and then halts, usually with "inaccessible boot device".
View 9 Replies
Feb 3, 2016
I just upgraded to an SSD and installed a fresh copy of windows onto it. I would like to delete windows off of my old hard drive and delete the old drivers off of it as well. I have a bunch of games on it that I'd rather not have to re-download so is there any way of doing this without formatting the drive?
View 1 Replies
Jul 30, 2015
I just installed Windows 10 and have got a problem that has me stumped. I have two GPUs, an EVGA GTX 760 as my primary and a GTX 560 Ti running a second monitor. The 760 had no issues in the upgrade, but no matter what I do to the 560, it shows up in device manager as Code 43. I'm trying to gauge if it's an issue with the fact I have two dissimilar GPUs or a bit of software not liking that particular card. My gut says software, but I don't know exactly what. I've done some googling to the effect and seems to be I'm not the only one with troubles but didn't find a fix that worked.I don't want to roll back just yet and my 760 can pick up the slack easily, so if there's a fix on the horizon I can wait. Otherwise, I'll have to check my options.
View 1 Replies
Oct 24, 2015
Asus laptop : Ux305
Download ISO from media tool creation, then using rufus to create bootable usb
After run setup, this error pop up
View 1 Replies
