Install From OEM Disk?
Oct 25, 2015
I have had no success in installing Windows 10 as an upgrade to Windows 7 on my newly built system. What I intend to do tomorrow is to install from the OEM disk which I just purchased for $117.14 from A...... I may return the Windows 7 disc ($61) for refund if it is successful. If not the Windows 10 disc goes back for refund and I will keep Windows 7. Yes, they will issue full refund and free return shipping no questions asked. That is an additional $56.14 to acquire Windows 10 (including a disc) but worth it to me I'd cross my fingers but those from my planet only have one digit per limb.
View 2 Replies
Similar Messages:
Aug 10, 2015
I want to clean install Windows 10 on another hard drive. When the custom dialogue comes up and it asks me which hard drive I want it to go on to, it does not give me the hard drive I want to put it on as an option. It is a 160 GB SSD. Windows 10 was registering it as a removable drive. I have a dual boot system and Windows 7 does not register it as a removable drive. It' s been working well as in internal drive for a couple of years until this Windows 10 thing.
View 4 Replies
May 31, 2015
Is there a way of going to 10 from 8.1 without burning an iso disk or USB, ie direct download and install.
View 2 Replies
Mar 16, 2016
I have an SSD with an OS already installed, now I want to install Windows 10 on another partition.The things is, when it's time to select the partition on the installer, it says that i can't install windows on the disk because it has an MBR table, and EFI needs to be put in a GPT one.
The problem is:
1) The disk is already formatted for GPT due to the old OS already installed on it.
2) i CANNOT format the entire drive!!! I need that OS there and currently i don't have ways to backup my data.
So my question is:Is there a way to fix this WITHOUT wiping the whole SSD? Because I've already googled everything related to this problem and EVERY WHERE the solution is to format the entire drive (which again it's not a solution for me).
View 1 Replies
Jul 31, 2015
after activating windows 10 upgrade, how do you make the install disk so no key is needed and that you can do a clean install
View 1 Replies
Aug 10, 2015
I have successfully upgraded to Windows 10 from Windows 7 (and solved the initial network connection problems).
However my OS has a lot of crud from the pre-upgrade state and I would like to do a clean install of Windows 10, without losing any old data files. I've read online guides on doing clean installs of Windows 10, but it is not clear whether you can only install into partitions that already have a valid Windows OS installed.
My computer has two identical hard disks, one of which is (or can be made) blank so what I would like to do is keep one with the 'cruddy' version of Windows 10 - at least until I have copied over all the files I want to keep and made sure I've installed all the software I want on the new 'clean install' Windows 10.
So, are there people out there who have done this? Are there things I should look out for?
View 9 Replies
Jan 21, 2016
When I go to repair Windows 10, I put in the install disk, it goes to the windows logo with the dots spinning around at the bottom then to a black screen. I left this for 1 hour and it did not progress. The disk also seems to have stopped spinning. The disk works in other computers.
View 1 Replies
Dec 31, 2015
I've tried using the "Create a Recovery Drive" and have tried making my own installation media using the "Media Creation Tool". Both seem to do nothing, just constantly search. The Media Creation Tool stays on the "getting a few things ready" screen for upwards of half an hour then I'll close it and it'll say "setup is cleaning up before it closes" and it'll stay on that screen forever. Even task manger won't close it - it will not show up as a process any longer, but still on the screen. EDIT: I have to shut down the computer to close the window.
Create a Recovery Drive, when choosing "Back up system files to the recovery drive", does pretty much the same thing, a screen with a green progress bar going left to right for hours. I'm trying to put it, either way, on a 32gb USB flash drive.
Its a new computer no software has been installed by me other than the MCT and a tool to find the windows product key. I'm very new to Windows 10 coming from XP.
View 9 Replies
Aug 27, 2015
how can I install Windows 10, that it uses the less disc space, it can? My problem is, that I have laptop with 64 GB SSD, and after upgrading (from windows 8.1) to Windows 10, the used space is more than 35 GB, so now I have a very little free disc space now.
View 2 Replies
Aug 31, 2015
I know I need to disable secure boot in order to change the boot sequence. I ran into an issue trying to install Windows 10 on a GPT partition - it said it couldn't do it. So...after much searching, i learned (??) i need to use diskpart to clean the partitions to create one large unallotted space which would then allow me to install Windows. My question is, can i convert the disk to mbr and install Windows to it that way and run it in that mode. If i can do that, what would be the command to do that? > convert mbr after the clean command?? What about enabling secure boot?? Can i do that if i have installed Windows under MBR rather than GPT?
View 8 Replies
Jan 30, 2016
I have a laptop that came with Windows 8.1. The hard drive failed and has been replaced with a new hard drive. If I want to install Windows 10 on this laptop, do I first need to install Windows 8.1. and then perform the upgrade to Windows 10, or can I just install Windows 10? Will Windows 10 use the Windows 8.1 license key in the BIOS to activate? Or will this not work unless I first install Windows 8.1. and then upgrade to Windows 10?
This computer has never had Windows 10 on it.
The computer has a new unformatted hard disk that has never had Windows 8.1. installed.
View 4 Replies
Feb 23, 2016
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
View 3 Replies
Aug 20, 2015
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 Replies
Jul 29, 2015
I was having long boot time issues with windows 7. It was taking more than 5-6 mins for my pc to become responsive on desktop. Then I upgraded windows 10 today , issue still persisted. After that , I tried clean installing the 10.
I still have issues which are :
1)After Windows logo I have a black screen for a couple of minutes then logon screen comes. ( Last reboot : 1.5 mins )
2)After logon , my formatted pc takes some time to became responsive due the system and svchost processes using hdd %100.
(2mins after logon , usage goes down and pc is responsive)
I checked my HDD and it was fine when using win 7.
View 2 Replies
Nov 5, 2015
I have a configuration where win 10 is installed on SSD but the Users folder is on a dynamic disk on HDD and the linking is made by a hard junction link from C: to D. I have removed paging on D as well as protection. Hence, I am able to remove all volumes of the dynamic disk and convert it back to a basic disk and format it.The problem is that I would like to keep all my installed programs (and settings, preferably). I have copied the Users directory to an external disk and copied them back to D after conversion. This seems to lead to a nonfunctional situation where I cannot even add a new user and most programs (even not all windows tools) do not work.What would be the best approach to avoid reinstalling the programs and to keep existing users?
View 2 Replies
Nov 17, 2015
Running windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
View 5 Replies
Aug 25, 2015
So, after about 2 weeks of experiencing Windows 10 I've decided to revert back to Windows 8.1, since I was more experienced at it. So I followed every step to downgrade the system, waited for about a few hours, then I noticed that when Windows restarted, it somehow went to an "automatic repair" loop. I've tried literally everything there was so I can get it running again, but nothing seems to work. But, there was only one option, in which I feel like an idiot to try out.
I went to Command Prompt and typed in diskpart.exe, then enter. I then typed in LIST DISK, then SELECT DISK SYSTEM, and finally CLEAN. Since I thought at the time that CLEAN works like resetting the PC, I rebooted it again, and I came to an error message saying: No boot disk has been detected or the disk has failed.Is, or will there be any other way to start my PC in a condition like this? If I'm missing any other details then feel free to ask.
View 9 Replies
Feb 2, 2016
Every time I boot up my pc I get a black screen with 2 lines of text "disk i/o error, replace the disk and then press any key". After I press any key pc boots up fine. Lenovo pc with Windows 10.
View 1 Replies
Jan 24, 2016
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
View 6 Replies
Dec 25, 2015
I have tried everything I can think of, including the stand-alone ZA uninstall, however the Win 10 installer is detecting *something* and refusing to proceed until ZA is uninstalled:
Some Apps need t be uninstalled
These programs need to be uninstalled because they aren't compatible with the upgrade.
Zonealarm 10 (2012)
View 13 Replies
Jan 15, 2016
I'm about to build my first desktop, and I have a laptop with Windows 10 (upgraded from 7 which it came with). I don't plan on using the laptop anymore, so is it possible to install the laptop's hard drive into the desktop then move the Windows install to an SSD? If not, should I just buy a Win10 key or would it be possible to contact Microsoft about transferring the OS over?
View 1 Replies
Nov 14, 2015
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
View 11 Replies
Feb 6, 2016
I bought the usb version since i don't have an optical drive bay. The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!I have made a video showing what happens (win 10): I also made a video that shows my BIOS.Everything looks fine... but it doesn't work!!
View 5 Replies
Aug 3, 2015
My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.
View 1 Replies
Jan 29, 2016
I have a folder structure (see below) that is created after upgrade from W7 to W10. In my previous question a day ago it was confirmed that it could be used for creating W10 installation media. So I don't want to repeat how it was created. It was created automatically and it is 3GB in size.
My question: I burned files and folders to DVD using native W10 burn files to disk method. The disk is not bootable. The structure on the root of the disk is exact as in Windows folder on the pic. Did I miss the option for making it bootable? Or it should be bootable just by burning the content to DVD?
View 9 Replies
Feb 17, 2016
Okay, so I am trying to download something from a disk, but it won't let me because I'm not an administrator, except I am. I can't do anything about it because it says I need to try in an admin's password, which i do not know and it doesn't even give me the option to type in anything.
View 8 Replies
