Installation :: 4 Partitions Created During Clean Install?
Dec 24, 2015
As the title say, is there any workaround to avoid creating 4 different partitions during a clean install of Windows 10?
Here is a sample of what I mean:
[URL] ....
I think one is necessary and unavoidable (the MSR one), but the other ones should be used for optional services that you may not require, like restore etc.
I couldn't find a work around yesterday and in the end I gave up and accepted those 4 partitions...
I clean installed Win 10 RTM version on my laptop a few weeks ago. I have a basic GPT setup.
Installation went fine, however the installer created a 'Recovery' drive (D with a size of 600 MB (262 MB free) & a 'Local Disk' drive (E with a size of 451 MB (128 MB free).
I am stumped as to why it assigned letters to them. If you see the attachment of a snapshot of Partition Wizard, you will be able to see the setup.
My question, besides why the assigned letters is the where the status is listed as 'None'. Is it safe to delete these?? I am assuming that the only partitions i need to keep are the 'ESP', which is 'Active & Boot' - so it is needed to be able to boot into Windows. How about the one listed as 'Other' - the capacity is 128 MB & all 128 MB are used - do i save this one as well?
I really wanted a less cluttered setup - so when all these partitions were created, particularly 'D' & 'E', i was perplexed as to why they were created.
I've upgraded from windows 8.1 with uefi bios, so basically now i can do clean install 10 without product key? But the real question is: My pc have 8 partitions, the primary one, 5 of recovery, 1 oem and 1 efi. Can i delete all partitions and create only one?
I have upgraded my Windows 8.1 system to Windows 10 through the Windows update app and have created an installation media USB stick. I want to clean install, something I am very familiar with, but not since the new uefi, gpt, legacy etc. that I'm not familiar with. If I do a clean install and delete the entire disk, Windows will create the partitions and install the necessary "data" to run the computer correctly? I don't need to save the data on the hidden partitions that are present now?
I have a top spec HP Envy DV6 i7 laptop which had Windows 7 on it then upgraded to windows 8 then Windows 10. I have noticed that recently the machine has become really sluggish and Cortana is not working not matter what I try.
I have decided to clean install Windows 10 which I have on a USB stick but before I do that I noticed I have 8 partitions
See below:
What I want is to have just one partition and clean install Windows 10
So, how do I boot Windows from USB drive. How can I delete all the partitions and leave one...
Upgraded my Win 7 Ultimate x64 to Win 10. Now when I went to perform a clean install of the Win 10 with USB created from Microsoft Media, take me through to the screen to partitions.
There are three partitions, one marked as OEM. What could be this.
I put in new HDD two years ago and had done clean install of Win 7 then.
I had Acronis True Home Image 2012 but removed it prior this Win 10 upgrade
Am I save to erase all these partitions for my clean install?
Just wondering looking at my partitions after upgrading to windows 10 . Do I need to keep the last too partitions? I love windows 10 and had presumed that after a clean install my old windows 8 and 8.1 would be removed are these last too files remainders from them and if so can i delete and how should i do so. Just took a snip of the partitions content!
Recently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install.
However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean install of w8.1
When i installed w10 however i noticed i have an abundance of partitions, and preferably i would only like to have my SSD and HDD as optional storage spaces. I do of course not want to delete any necessary recovery or system partitions, but to me it seems like i currently have too many.
Which of the partitions in the picture below can i delete? Is it safe to delete all the recovery partitions when clean installing w8.1 from usb? meaning that will the installation create the necessary partitions required by windows?
I want to clean install Windows 10, and I already did that before using the tutorial here. But last time I did not have Ubuntu install.
And in the tutorial, you must delete all partitions in order for Windows to create the special necessary partitions (Recovery, MSR, MBR etc..)
But now that I have a Linux partition that I don't want to delete, and according to the tutorial, Windows installation will not create these partitions.
How can I manually create them? Is it simply allocating a space for them and naming them the proper way and Windows will know how to use them? Or there's more than that? Also, What happens if I do not have these partitions?
100MB (created from Windows 7, which I knew was needed for booting)
C Partition (Windows instllation)
450MB (created after upgrade)
So, do I still need the 100MB? and what is this new 450MB used for? Disk Management says that is empty. I don't want to delete anything for risk of making my system unbootable.
My DELL Latitude laptop came with Windows 8.1 Pro x64 on it. I decided that I want to upgrade it to Windows 10 Pro x64.Before I did anything I used DELL Backup and Recovery to create a flash drive so I can always restore the PC back to factory if anything goes wrong during the upgrade process.
After creating the recovery media I used the Windows 10 upgrade wizard to upgrade to Windows 10 carrying over all of my existing files. I primarily did this so my Windows 8.1 Product Key which is injected into the motherboard would officially become a Windows 10 Product Key.Now I would like to do a 100% clean install of Windows 10 through a bootable Windows 10 USB flash drive that I just got done creating but have a few questions:I booted from the flash drive and went to Custom (Advanced) install and I am currently viewing all of the partitions:
Which of these are DELL related and which of these are just the additional partitions Windows automatically installs?Can I just delete them all and fresh install Windows 10 on Unpartitioned space?Is there any that are non operating system related and might be worth keeping like the DIAGS one?Will my DELL Backup and Recovery media rely on any of these if I delete them and then try to use it later on?Is there any use for any single one these anymore now that I have backup recovery media and will be going to Windows 10?
I already have my pc updated with windows 10, I recently upgraded my hard drive with a samsung 850 pro ssd but i discovered that my recovery partition no longer works and when i try to do a system image windows says it cannot do it because files are missing . I used the samsung data migration software that came with my ssd, when i go to disk management it shows my three partitions which are
500mb recovery partition
260mb efi system partition
windows c 476.18 gb ntfs , boot,page file, crash dump, primary partition
My question is if I do a clean install of windows 10 will these partitions be created again during the windows 10 installation automatically or will I loose some . I want to be able to recover my pc should I need to and have everything working. Someone suggested that I don't need a recovery partition and windows 10 does not create new partitions .
I don't know what the efi system partition is and don't know if i need it . i have watched some youtube videos of people doing clean installs of windows 10 and they all seem to differ . during installation when given the choice of where to install windows some people delete all the partitions on their hard drive while others pick which one .
My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
I'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
All the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
So I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
I got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
My Wife is a Windows 10 Insider, and would like to clean install the latest Insider build on a new HDD, replacing her current Insider installation. What would be the easiest or best way for her to do so?.
I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.
So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada
