Is there anyway to create a all in one install USB stick using the media creation tool. I have 2 pc's running windows 10 Pro and a laptop running windows 10 Home . It just saves me having to have 2 separate install USB Sticks.
I have seen torrents available but I'd rather create one myself so I know it doesn't contain any viruses etc.
My system install of build 10162 won't activate, as they pulled the validation from these builds. Unfortunately, I can't upgrade to 10240, which can, I was told by Windows support, be activated. This is because Windows isn't already activated!!! (Windows Update won't download it (it always stays at 0% )).
To solve this, I want to upgrade manually and thus I flashed the ISO on a blank USB stick. Can I keep all my data and app settings, etc. if I upgrade using the ISO on the stick? Or, in other words, is it possible to "upgrade" when installing an ISO, or do I have to do a clean install?
Currently I installed Windows 10 Pro build 10586.0 from my USB flash drive created from the Media Creation Tool (MCT).My question is, I noticed that Microsoft has recently updated the MCT to the latest build.Before I decide to put this latest build onto my USB flash drive using the MCT, do I need to reformat my USB or will the MCT do the whole process for me by overwriting all the current Win 10 boot and setup files that were on my USB?So right now, I have all the Windows 10 bootable files created from the MCT, but the build that I have on there now is 10586.0.
So if I decide to create another Win 10 bootable USB using the MCT (Build 10586.36 or higher), will the MCT do all the reformatting automatically or do I need to manually reformat my USB myself before running the MCT?
there is one thing I do not unmderstand when creating a USB Stick using the Media Creation Tool: I can have both flavors, i.e. x64 and x86 on one Stick, but not Home and Pro, why? I thought this is simply a flag that can be set.
My task: I have to update several PCs with one USB Stick, running former versions of Windows of all kinds, i.e 32 and 64 Bit, but also Home and Pro. Do I really need to create two sticks, one with Home, one with Pro, or can I change that somehow in a configuration file on the stick?
I bought a new SSD drive and used it to replace my old slow HDD in my laptop. I have just successfully installed windows 10 on it.
During the step shown in the picture below, I clicked on "New"
Which brought me to this step
From here, i just chose "Drive 0 Partition 4", clicked "Next", and the installation began.
Now here is my question, does it make a difference (or is it better) if I had chosen to format "Drive 0 Partition 4" first and then install? cuz my friend is saying that I should always format before installing Windows.
I just purchased a new windows 10, which came as a USB Flash stick and Im curious if I can use it as an emergency boot USB?
in case computer wont boot normally?
How do I see, and access, a USB Stick, or an external HD that I plugged in ?
View 1 RepliesI am trying to create a system recovery drive on a usb stick using Create a recovery drive in Settings section.
But apparently I am missing many files such as winre.wim and install.wim as I keep getting error messages that I am missing files and instead am told to insert my Windows Installation dvd to get them. Since I have a Win10 Upgrade install from Win 7 Home Basic, I have no dvd install disk to either copy those files from or use as a rescue dvd, and I looked back at Win 7 files on another drive, and the .wim files are not in 7 either, as that was a Dell reinstall dvd (still have that), but no such files there either.
So can I get Mr. Gates home # in case I need to rescue my OS? My past behavior tells me I WILL need to rescue my pc sooner or later, & maybe this time I can be prepared.
I have a small laptop which does not have a CD. I am trying to create a system repair disc onto a memory stick. It worked on Windows 8 before I upgraded to 10. How can I create a repair disc on the mem stick?
View 4 RepliesEvery time I start my laptop the Touchpad setting of my Synaptic V1.7 on SMB port changes back to the default settings. I can't work with the default settings. I tried updating it but nothing changed. I asked this in another thread but got zero replies.
View 2 RepliesPrior to upgrade to W10 I want to put my internet explorer contact info in a memory stick just in case but I have forgotten how.
View 1 RepliesWhen ever i hold a key down for 10 seconds the pc beeps, then the key repeats till i click that key twice. i have been trying to turn this off so i can play some games.
I have tried turning off filter keys and sticky keys in both the ease of access screen from settings and "Control PanelEase of AccessEase of Access CenterMake the keyboard easier to use".
How to make my keyboard normal again
Downloaded Windows 10 ISO, created a bootable flash drive using "Windows 7 USB DVD download tool" which I also got from Microsoft.
Set first boot device to USB in BIOS.
Saved changes and turned laptop off.
Turned it back on, with the flash drive plugged in, but computer boots to Windows 8.1 instead of the Windows 10 installation.
Restarted again, and pressed F9 to show a list of boot devices, it just shows OS boot manager, and DVD drive, not the flash drive.
Tried with Windows 8.1 USB installer, same thing happens.
Went back to BIOS, enabled "Legacy Mode" and turned off "Secure Boot", restarted, the computer can now boot to the USB stick.. for both Windows 8.1, and Windows 10.
Disabled Legacy Support, the computer fails to boot to USB devices again.
So, I cannot boot to a USB device if I have Legacy Mode disabled in my BIOS.And if I boot using Legacy Mode, Windows wants to convert my GPT HDD to MBR.
How do I boot to USB using UEFI instead of Legacy?
In Windows 7 I could copy my network settings to a usb stick and transfer it to another machine just by clicking on the file generated - really simple. But I can't find the same option in Win 10 -
View 4 RepliesMy Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've tried to change it but it continues to be the same "selective Startup". This makes me uncomfortable cause possible future problems.
View 8 RepliesI work with HAAS CNC lathes and mills, which only accept FAT16-formatted USB drives. I have an old 2gb drive that is starting to fail so I got a new drive. problem is the smallest size I could find is 8GB, which is too big for FAT16. I tried using Disk Management but the resize option was greyed out. Is there any other tool I can use?
View 4 RepliesMy partner uninstalled AVG and then found that the wifi wasn't working. Tried an ethernet cable, no good either. Then tried to roll back in W10, still no luck.
It seems that the wifi adapters have disappeared and it may be a common problem with W10. I can download a fix to a memory stick, but what will be needed to get back online.
I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
Upgrading from windows 7 to 10, started install at around 10:30am and left it....around 2:30pm it started the large circle with the % in the centre, and again left it for another hour or so and came back to a black screen, no cursor or anything.
I waited until about 7:30 and still nothing and did a reboot by holding the power button down. On restarting, I get the windows 10 logo with the spinning dots, and then it cuts to black with no cursor. The CPU light does what it would usually do on startup, and when it first cuts to black but then the screen seems to change to a different black (if that makes sense?!) and the light only blips extremely quickly with a long period before it blips again
i know this is another update gone wrong post but I can't seem to find any with the same problem, just similar ones. I've read it can take a long time, but it's been nearly 11 hours and is very frustrating!
i'm not mega pc savvy, I get 2 options when I boot, and I've looked and there's no option for me to do a safe boot, or to revert back go windows 7. If I leave it on black screen for too long it automatically goes into sleep mode.
Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?
View 3 RepliesFor those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
i'm having an issue with my laptop, i think it's something called a memory leak because my RAM won't go below 80% even when my laptop is idle. I've been searching the internet for answers on how to fix this problem but didn't find any luck. I've already wasted an entire day trying to figure out how to fix this, I even tried to do a system restore but i forgot to save any restore points. I'm hoping Resetting/Refreshing would be the answer but i'm facing another problem; My media installation tool or USB Bootable Drive (I don't know if they're the same. It's what i used when i installed Windows 10) is that of a previous Windows 10 version & build. Would it work If i use it to Reset my laptop? I'm currently using the latest version, build 10586.36.
View 1 RepliesI recently made a clean install of Windows 10. However when I reboot I noticed that the Wi-Fi tray icon wasn't showing any menu. I click it and nothing happened. No list was shown, the only way to connect was to go to This PC Configuration --- Internet & Networks --- Wi-Fi.
Wi-Fi tray icon, battery and volume don't work. I don't know what to do. I search about it and found something about resetting explorer.exe, I try that but didn't work.
I have 2 seperated (physically) SSD drives in my laptop.Previously I had windows 8.1 on one drive, and I installed windows 7 and upgraded it to windows 10 on the other SSD drive.I enjoyed windows 10, so I formatted the drive with the windows 8.1, but now suddenly my laptop says he can't find system drive, and I can't load the windows 10, althogh it was installed with no connection to the windows 8.1 and on another drive.
View 5 RepliesI have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): OS installation problem - YouTube
I also made a video that shows my BIOS: Gigabyte GA-Z170X-Gaming 3 BIOS - YouTube