I have Macbook with Yosemite. I had installed win7 32bit Home basic, later on upgraded to win10 64bit.I have recovery drive of win10 on usb flash drive.Now while I open win10, it shows "BOOTMGR missing restart.What is the solution to get win10 back
View 1 RepliesGot a new Samsung SSD, used the software that came with it to move C to new drive. Ended up with msg "Bootmgr missing". Reinstalled original hard drive, got the same msg. Pulled out SSD, hooked it up to my laptop. Looked at it and the software cloned C drive but the sequence is wrong. It has the 450meg partition first, then the UEFI partition and then the Primary partition. Is there anyway to move the partitions to the correct sequence? I can get into the BIOS but I can't do anything mouse, keys,tab nothing will work so I can change the boot order to my DVD drive to install a fresh copy of Windows.
View 9 RepliesI used TrueImage 15 to clone and shrink my win10 load to a new SSD. Original drive was a 1tb with 120g used in a 900g partition. I had TI clone and shrink that to the 240g SSD. However, the bootmgr was left behind.
I used EasyBCD 2.2 to put the bootmgr back but now it seems to be still missing a few secret win10 parts and asking for startup repair.. Can I use the downloaded win10p64 cd?
As IE11 was malfunctioning, and my GT610 driver doesn't seem to work properly in Win10 32 bit, I attempted to upgrade to Win 10 x64 on my machine (Dual core, 64 bit ready, 4GB ram), and whilst doing so I think I've deleted the C: boot partition. I had partitioned the C drive and put the data in F: drive partition before hand so I didn't lose all my data.
When rebooting, I got the message "bootmgr is missing", so tried to boot from a Win 10 32bit iso DVD. I can get the DVD to launch, and tried to go through a repair, but got the message that the drive/partition was locked. I can't repair it, or boot. I also tried fixing it using Minitool Partition Wizard, which shows the partition without a label and as "unformatted". wasn't sure whether I should format the partition or not.
what I can do, to unlock the drive (from command prompt?) and then reinstall or repair Win 10.
Can I keep the F: partition with the data on it whilst doing an install of the x64 bit windows, or will I have to reformat the whole disk because of the different architecture?
I started my PC this morning and was greeted with a BootMGR missing error, i followed a few things online including going into the CMD and entering the following codes;
bootrec /RebuildBcd
bootrec /FixMbr
bootrec /FixBoot
They didn't work so i've decided it would be easier to just reset my OS, however if i try to reset i'm told i haven't enough space in my C drive. So how can i make space without being able to go into my PC properly?
Recently installed my new A10-6800K CPU, worked perfectly. checked my system information to make sure everything was at the versions they needed to be, noticed that the MoBo (gigabyte f2a68hm-hd2) version was from 2014 so i updated it to the latest version but delayed when it asked me to restart. everything carried on as normal
got back from work, turned it on. bam,
"BOOTMGR is Missing
Press Ctrl+Alt+Del to restart"
I tried pressing them on wireless keyboard - it didnt work. tried it on my wired keyboard - didn't work.
I tried putting the windows installation disk in and restarting it - didnt work.
I think it was the MoBo update that did it...
Specs:
Windows 10
Gigabyte F2A68HM-HD2 Motherboard
8GB DDR3 1600mhz RAM
1tb Seagate Barracuda Sata
A10-6800K
EVGA GeForce GTX 750ti
Unplugged internal HDD and put the installation iso on an ext. HDD.. manages to get onto installation part (it complains that it cant install it on my ext. hard drive)
I just finished building my first ever PC. I am using the education edition of windows 10 if that makes a difference. I downloaded it to a blank flash drive I had lying around via this link: [URL] .... When I tried to install windows, it said "bootMGR is missing". I set the flash drive to boot first in BIOS but it still doesn't work. I am wondering if it has to do with formatting or something like that.
Specs:
i5 4690
MSI z97 PC Mate LGA1150 Motherboard
G.Skill Ares 8GB RAM
NZXT Phantom 410 Case
Sapphire R9 270X 4GB GPU
Western digital caviar blue 1TB
Zotac 120GB SSD
SeaSonic S12II 620w Power Supply
Asus PCE-N15 PCI Express Wifi Adapter
My original os is win7 then i upgraded to 10... After a while of using it... It opens the Blue screen saying unmountable boot volume.. Also i dont have win7 cd since the os was built in...
Next i rebooted it, it says "preparing automatic repair" i tried to wait.. But after it says that, it goes to a black screen and nothing happens
Then i tried dloading the iso from the site and then burned it to a usb.. Then it says
Press any key to boot from USB
*presses any key*
BOOTMGR is missing
Press ctrl+alt+delete to restart
Is the problem in the usb or it just wont open because of the error?
I only have recovery disks on win7
My laptop is Vaio SVE111A11W
Cant open my laptop due to this so i cant really attach the needed files..
I have dual booting setup on my pc my main system and my development system but to get the development system my computer first boots the main one then asks me which os i would if the main one it goes right to as it already loaded but if it is the development system it will restart and load that, so my pc has to boot twice. Is there a way from the main system some how i can restart straight to the other one. Both os are windows.
View 1 RepliesMy win10 installation got stuck at 91% so I had to restart and disable my antivirus and other services, but when I start MediaCreationToolx64 it starts to download the 3gb again from the beginning. Is there an installer somewhere in the downloaded files that can let me skip this or do I have to download it again?
View 1 RepliesI recently started trying out Windows 10. It's buggy and frustrating, but it's still in preview mode, so... That's expected.
Nothing was working when I installed build 10074 off disc, so I installed build 9926 off a disc (I got the iso from MSDNAA, I'm a programming student) then upgraded via settings to 10074.
During the upgrade, my laptop started resetting, normal. But halfway through, the resets stopped working.
The screen switches off, the cd drive switches off and the hdd activity light switches off, but the power stays on, and the fan keeps running. It also doesn't switch off on shutdown either.
I finally have a working version of Windows 10, minus Cortana and Spartan (I'm in Aus), but now my laptop won't shut down.
Could it be drivers? Is it OS interference? Is there a way to fix it without uninstalling and re installing Win 10? I really cbf going through all that again...
My windows 7 PC was hard to start and restart and I needed to try 10 times or more before it worked (then I didn't restart it for days).
I managed to upgrade it to Windows 10 hoping that it will cure the problem BUT still it is a problem to start.
I checked everything and used every tool possible on windows 7 and windows 10 but nothing worked. (ccleaner and others failed)
So now I have a windows 10 PC that doesn't want to start easily.
After upgrade to windows 10 I GUESS that all driver files have been changed ?what else could it be ?
How to enable Sleep? Power only gives me Shutdown & Restart
View 7 RepliesI'm using windows 8.1 on ASUS N series laptop 64 bit, my windows got problem and after i updated to windows 10 and try to factory reset it, it got to 99% and say that the window has a problem, it cannot reset my windows and stuck in restart loops.
I've spam F9 and try to reset the pc again, but the problem still persist and i even try to solve it with the advanced options ( startup repair, system restore, system image recovery setting - all end up with this pc require administration account, and somehow my account is lost due to reset earlier) i even try to reinstall windows with CD but it doesn't detected.
It seems like i lost both my windows 8 and windows 10 on the laptop.
Iinstalled windows 10. After installation, my files were ok. Immediately, i moved them to the desktop and documents. Then, i restart the pc. Then i see that all my files (on desktop and documents) are gone. My programms and other files are ok but the ones that i moved to desktop and documents were deleted. How can I restore them?
View 3 RepliesI upgraded to Windows 10 everything seems to run fine but system will not restart from the restart selection on the start menu. Windows update will not reboot automatically either. System looks like it is going to reboot, everything shuts down but as system trys to restart everything freezes. Only way around it is to do a hard shutdown by holding the power button. Updated graphics card,hard drive and bios but still no luck.
View 1 RepliesI am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
View 1 RepliesBit of background: Was getting 8024601 errors when attempting to upgrade with the Windows Update method. It would start installing, get to 85% before stopping for a while. Then it would finally reset, only to boot up win 8.1 and Windows update would have the above error code for the attempt.
So I decided to try the Media Creation Tool instead. I select the option to upgrade this PC, it downloads fine, and everything goes okay until it wants to reboot my machine. Tried it twice, first time it sat there waiting to restart. It never did, no programs exited, didn't log off or anything. Second time it gets to the same stage, but locked up my computer instead.
For a couple of days, I am trying every solution from this forum, for windows 10 upgrade on my laptop Dell 15 L502x (early 2011) with windows 7 Home Premium. I tryed via Windows upgrade system tray icon (after restart - black screen,mouse pointer), then I tryed wit ISO on dvd/USB, same problem. After that I have disable one graphic card, then another, in both cases, same problem. Every time(when black screen come) I tryed with CTRL and then type password - no result. I have updated all my drivers, all updates are downloaded,
View 9 Repliesi was planning on upgrading my W7 main machine this weekend to windows 10, at one point i did have the Downloaded Files to do the upgrade, but those files are now missing From the Folder.
I did clean up my C: in prep for the install, did i remove the Windows 10 Files., if so, How do i get them back.
Updates are up to date.
I upgraded to Windows 10 from Windows 7 and everthing installed without problems exept when I start or restart with a usb flash drive inserted, I get "Boot manager is missing". If I remove the flash drive and select Control-Alt-Delete windows starts with no problems.I realize the Windows trying to boot to the usb and fails.
View 3 RepliesMy problem is that I cant set a restore point as Windows says some files are missing. So when I try and reset Windows it says it can't find the reset environment.
View 3 RepliesI am using build 10130 NL, today I got update to build 10240. After the update I have the problem "Missing operating system" . I am using a ASUS X77J series laptop with SSD drive.
View 9 RepliesI installed Windows 10 as an upgrade and ever since my computer will not do a restart. Whenever I try a restart, the computer idles down then just hangs there with fans running and blank screen. The only way I can restart it is to press the reset button on the front panel after it idles down, or shut Windows down and power up from scratch. Things I have tried so far:
1) A standard Windows repair. This did not fix the problem.
2) Downloaded and ran the Bo Yans boot repair tool. Did not fix the problem.
3) Ran all of the Chkdsk options, which took 3 hours to complete and all results came back clear. Still Windows 10 would not do a restart.
4) Ran Easy Repair Professional for Windows 10. No luck there.
5) Scanned the registry and fixed all errors. Still no luck.
6) Checked the Power Management Options and found these to be okay.
I have recently just upgraded to Windows 10 from Windows 8 via the recommended way. However, I have noticed it take a bit longer to start up and restart than Windows 8, it's like I have gone back to Win Vista or 7.
I personally would have performed a Clean Install of Windows 10 if there was a legal ISO for download but in saying that..... I bought my Laptop with Windows 8 pre-installed and wouldn't quite know how that would work performing a clean install anyway with out knowing my Windows 8 Product key as it is not visible on the Laptop. Not to mention that with it being a manufacturer OEM it probably wouldn't work using a legal ISO download. I didn't even get a Windows 8 installation DVD with my Laptop so had to make a Backup DVD.
So I'm thinking if no joy I shall just go back to my Windows 7. It would be a shame really because I really like the whole layout with Windows 10..... It's cleaner and crisper.
I need to do a RUN in Administrative mode but I can't do it by right clicking as in Win 7 ....
View 1 Replies