Installation :: Blank Screen Upon Resume From Sleep Or Hibernate
Aug 5, 2015
I upgraded from Windows 7 "Starter Edition" (32-bit) on an ASUS Eee PC 1005PE (2GB RAM) to Windows 10 32-bit. This mostly seemed to work, however I can no longer resume from either sleep or hibernate. In either case, I get a blank screen. The other problem I notice is that the task bar separator (with a scroll bar type widget) between the active tasks and the notification icons seems to disappear and the active task icons seem to get mistakenly hidden from view. This is a minor annoyance and something I can live with, simply by switching periodically to the "Task View". But I would really like resolving the wakeup from sleep problem. So far I have tried updating the video adapter driver (which was already "up to date"), and I checked that I have the latest BIOS firmware.
View 3 Replies
Similar Messages:
Jan 30, 2016
Just installed Win10 on my 4 yr old HP G60535D. Now I have have to re-boot everytime I shut the lid. Played around with power settings, etc etc but no luck. When I first open the lid, I can hear the computer running, a slight mechanical burp of some sort, then nothing... totally blank screen. I have to hold the power button down to shut it off, then re-boot. A 1st world problem for sure, but kind of irritating.
View 5 Replies
Jan 4, 2016
My laptop acer4750 resume very slow after hibernate, it keep showing windows's logo and not run to log-in screen anymore. Then i need hard-reset every time
View 2 Replies
Dec 7, 2015
I went to see my daughter and after she resumed her computer from hibernate (it had been off for about 2 days) a message popped up saying its ip address had been detected in use by another computer.
I suspect it was my cell phone that when in range asked for an ip address and the router, thinking the hibernated laptop wasn't using that ip address any longer gave it to my cell phone. Then after her system resumed from hibernate, it continued to use the ip address it had when it hibernated.
Does windows renew its dhcp ip lease on resume? Can it tell if the lease expired?
View 3 Replies
Jan 24, 2016
I had an initial fault with Windows 10 where the start button disappeared so to switch it off I used Alt/F4. That brought up a small screen that allowed me to shut down . The next time I tried it I looked at a couple of options and chose sleep mode...Big mistake. I cannot wake up the screen at all, the computor itself will switch on and off mit the power switch but nothing appears on the screen, it is blank. I have tried hitting various buttons on the keyboard to no avail.
View 2 Replies
Oct 19, 2015
Ok, I have read several people having problems with the sleep/power save modes.
I have a similar problem. I can't keep my screen from going blank. Now what I have done is I went into the power save and sleep modes and had everything set to "never" including "none" on screensaver. Well in 5 minutes the screen goes blank but the computer, drive and my previous items & webpages are right where I left them. I also tried setting the time the display goes to sleep for 30 minutes and it stills goes into blank mode in 5 minutes. My assumption is, no matter what I set the power/save and screensaver to it still goes into a 5 min no activity screen blank.
Computer is a HP ENVY dv7, AMD A10,Quad core with 16Gb mem; 650Gb drive. Previous OS Windows 8.1. All drivers were updated to latest before update to Windows 10.
View 1 Replies
Jan 15, 2016
I did a fresh install on a SSD not to long ago. The computer is running very smoothly for the most part. However, sometimes when I open the lid to my laptop, it is temporarily unresponsive for a minute or so when resuming from sleep mode. It's pretty annoying. I think it has something to do with my USB settings because it only seems to do it when something is plugged in there. For example, thumb drive, external hard drive.
I tried playing with the settings in power settings. I have turn off hard disk set to never. USB selective suspend set to disabled.
View 1 Replies
Aug 24, 2015
I have tried out a few different monitors recently, but I just settled on the one I want to use. All was going well but after it wakes from "sleeping", the windows are being resized and moved. Perhaps there is some issue with drivers from the other monitors messing things up?
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Aug 14, 2015
After installing Windows 10 I had a gray screen. I thought the laptop had gone to sleep so I pushed the power button to wake it up. It powered down so I powered it right back up. I got the small new Windows window icon and the spinning circle below it then the screen goes blank and nothing! ?!
View 3 Replies
Aug 12, 2015
After the update, I have Windows 10 installed on my laptop. I was not asked to change my password to a pin. I thought this was odd, because that was the process with another laptop at work that I have successfully updated. Thinking nothing about it, I proceeded, and it looks as if everything is updated properly. I don't have anymore current updates to install and have shut down and restarted this laptop several times using my password. I was wanting to set a pin, so I went into Settings/Account/Sign-In Options. The screen never shows any information and the active circle indicator just keeps gyrating in a circle. Here's a snip ....
View 1 Replies
Jun 17, 2015
I had problem dual booting win7 and win10. After many attempts I was able to dual boot.
But in the process, I deleted "system reserved" partition. So windows want start. I performed start up repair and it solved the problem. After that I reinstalled win7 ultimate which create "system reserved" partition again.
But the problem is hardware wan't shut down, hibernate or sleep. Windows shut down properly, but hardware remains active. I have to hard shut down it by pressing button.
Laptop model: HCL ME ICON L 1015
System Event log:
critical: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
View 8 Replies
Feb 23, 2016
I have BSODs after waking my computer up. Windows 10 upgraded from Windows 8.1. Waking from hibernate generates Kernel_Security_Check_Failure. Waking from sleep generates mostly IRQ NOT EQUAL.
View 2 Replies
Jan 25, 2016
I have Windows 1 on my Dell Inspiron 11 3000 series. A few days ago I took a quiz for one of my online classes and have to use Respondus Lock Down Browser, which I have not had any problems with in the past. However, after I X'ed out of my start bar at the bottom disappeared so I had to restart it. Well once I did and got the bar back when I go to click the power symbol to select shut down only a blank box shows up. I was hoping it'd go back to normal but it hasn't. So in order to select shut down I have to click Ctrl Alt Delete and click the power button option at the bottom left there in order to see the Shut Down, Sleep and Hibernate options.
View 1 Replies
Feb 23, 2016
How do I wake up Windows 10 if it goes into Hibernate or sleep after a period of in activity?
View 3 Replies
Mar 15, 2016
you can set both your sleep & hibernate timings in either Battery mode or AC mode; very straight forward; it is a page in settings where you can a) set up a "power plan" , and on the same page, a setting for 'how long before the unit sleeps", ie-1 sec, 5 sec, 1 minute, 5 min, 15 min, 1 hr, 5 hour, Never (in both battery and AC modes); no matter what I set it at, even "Never" the screen drops off in approx. 3-5 sec ....
View 1 Replies
Aug 2, 2015
Ran win 10 for a couple of days, all seemed fine. this morning I awoke to a black, blank screen tried to restart computer and got an "Entering Power Save Mode" on the screen for a few seconds, that's it ! I now have a Dell XPS anchor...
View 4 Replies
Nov 18, 2015
When my computer sleeps or hibernates all the open programs close. When I wake up the computer, I have to recover or restore everything I was working on before. Very annoying. I have checked all the power settings and everything appears to be right, but this problems persists.
Drivers are all up to date, but it has always done this since new in June. I'm just getting around to trying to find a solution.
HP 15-f111dx
AMD A8 with R5 graphics
12GB RAM
View 5 Replies
Oct 21, 2015
I have been using Win10 since July. It has been working fine. Just recently I noticed a blue screen at boot up stating, "resume from hibernation". I have never used hibernation in my life. Sleep mode, yes. Hibernation, no. But I have an SSD and don't use sleep anymore. I do a full shutdown every time. I noticed the same issue on my Dad's Win10 computer.
The reason I am asking is I want to boot from a USB flash drive, but "resume from hibernation" will not allow that.
View 5 Replies
Sep 28, 2015
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
View 2 Replies
Dec 24, 2015
Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.
Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.
This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.
View 9 Replies
Aug 7, 2015
If I use the Window 10 Upgrade System Tray Icon to do the download then it will auto-resume with no data loss if the internet connection fails. If I try to download Win 10 Upgrade some other way then it does not have auto-resume and I'll lose the data and have to start over.
I have 3G cellular internet here in India. It is unreliable and slow and often drops out. So auto-resume is an absolute necessity if I want to successfully upgrade to Win10.
View 8 Replies
Aug 5, 2015
My plan is soon after I get the Win 8.1 laptop to download and install Win10. Here 3G cellular internet is slow and unreliable. I'm scared that if I try to download Win10 it will fail and I'll have to start the download from the beginning.
Someone told me that the Win10 download includes the ability to auto-resume so that if a download fails it can re-start from where it left off once the internet comes back. Is that true? I need to get confirmation on this before I get my new Win8.1 laptop.
If Win10 download really does have auto-resume capability then I can do the Win10 download and resume as needed if the download fails. without losing data.
How to confirm that Win10 download has auto-resume capability so downloaded data is not lost.
View 2 Replies
Jan 7, 2016
I am facing a problem with my laptop hp probook 450 G1 after upgrading to windows 10 ! After waking up from sleep I found a small blank white window in the left-up side . It last until the next restart pc ! I have updated windows update from setting>update & security > update windows. I have also downloaded the latest version of drivers from hp website.
View 1 Replies
Aug 12, 2015
I have a admin password. so when i put the pc in sleep mode it used to prompt for password in windows 8. But it seems in windows 10, it doesn't prompt for a password and goes directly to the os. How to put the password screen back in sleep mode?
View 2 Replies
Aug 4, 2015
My machine will go into hibernate mode, but will not go into sleep mode. I just want to be able to wake it with the touch of the mouse.
View 1 Replies
