Im doing a clean install on a new SSD I just bought. The Samsung 850 EVO. I have a USB flash drive that I use to try to install Win 10 and I cannot get it to work. I get to the install screen and when it says it need to reboot it won't reboot back into the Windows installer. All I get is this when it reboots. (See attached picture) I have tried after the restart to boot into the SSD and the flash drive. I get the same message as mentioned before if I reboot into the SSD, and if I reboot into the Flash drive it just restarts the whole installation process. I also can see in the installation program that the OS has taken space up on the SSD even though I cannot boot from it.
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
I recently built this system for a family member as a low budget media/gaming pc. This was originally setup with windows 10 on the 1tb main drive, so I know everything works. Now we decided to put an ssd in as a boot drive, and I cant seem to get it working.I wasn't able to clone the drive due to inconsistent sector sizes between the drives.
I've finally completed the install on the drive after many failed attempts but when I try to boot from it the message reads "reboot and select proper boot device or insert boot media in selected boot device".
I have the Windows 10 Pro ISO with a Windows 10 key. (from MSDN)
I want to install Windows 10 as dual boot with Windows 8.1. Both are x64.
Is it possible to install Windows 10 from the ISO? I know you can upgrade that way. But I want to do a clean install AND install alongside Windows 8.1.
I have two systems.System 1 is a desktop running W7 Premium SP1. I did clean install of W10 from iso on separate partition. W10 will not activate using W7 numbers. I suspect that is because I moved W7 to an SSD 6 mos. ago and W10 expects the old HDD. BTW, installed W10 to partition on the SSD
System 2 is dual boot laptop (Dell Inspiron) with W7 SP1 and W8.1. I want to keep W7, and I could try W10 install either by upgrading 8.1 or clean install to the 8.1 partition. Reccomendations? I don't want to risk losing the W7. I do have disk image backups of both W7 and W8.1.
Read the tutorials but still not sure... I want to use my new SSD Win 10 Pro 64bit upgrade clean install via Brink's USB tutorial (when done setting everything up) and would like possibility to be able to dual boot with/to my old Win 7 Pro 64 SSD in same box.
Can this be done this way and what's the way to get the bios to play nice with the two Windows SSD operating systems ?
1. Upgrading does not allow an installation with dual boot option.
2. Windows 7 is gone after one month. If you don't like it, too bad.
3. My "legacy" Dell colour laser printer will not function with Windows 10. It works flawlessly with Windows 7 and getting a new printer gets rid of the saving plus a lot more than the savings of a free W10. I will pass on the "free" upgrade.
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.
SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.
QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
Windows won't boot, and it also won't repair install, refresh, reinstall (Windows 10), chkdsk, boot repair etc. I have tried all these so unless anyone can think of anything else I will have to do a clean install and upgrade. I suspect the hard drive has failed though.
I built myself a new computer recently and it boots fine if I am booting into the bios. However when booting off my thumbdrive to install windows 10 it boot loops, getting the the windows symbol and then restarting.
I want to purchase a copy of Windows 10 Pro. I currently own Windows 7 Ultimate. I do not want to lose Windows 7 Ultimate because I have games and other files that I am concerned will be incompatible with Windows 10 in the same way that they are incompatible with Windows 8.
My system specs: Intel Core i7-4790K Asus ROG Maximus VII HERO Club3D R9 290 Samsung 840 EVO 250GB SSD Western Digital Black 1TB WD1003FZEX Asus DRW-24B1ST DVD-RW G.Skill Trident X DDR3-1600 CL7
The 840 EVO has Windows 7 Ultimate installed on it. There are many basic programs installed to this drive, such as Microsoft Office, my Daemon Tools, Fraps, and other "mission-critical" things that I want to access quickly and reliably.
My mass storage drive is the Western Digital Black drive. All my games are stored there, as Steam has a folder it reads most of its games from. A few other large programs are stored there. It only has one partition.
What I've been thinking of doing is when Windows 10 comes out, I want to grab a 256GB Samsung SM951 M.2 drive for my Maximus VII Hero and install Windows 10 onto that. I'm hoping that way, I can access my games via either Windows 7 or Windows 10, so that if there's compatibility issues, I can boot to either Windows 7 or Windows 10 and not have to worry about being able to play my games. I don't really want to do the free upgrade path because I'm concerned that it will replace Windows 7. I don't want that.
I'm also wondering if I can still run the games on the WD Black from Windows 10 using Steam launching from the SM951, as I currently do with Windows 7 on the 840 EVO.
I'm pretty certain that I won't be able to access Microsoft Office, which is on the 840 EVO imbedded into Windows 7's Program files. Or will I?
I just upgraded to Windows 10 and I would like to do a clean install. However My PC has a 1tb HDD as the C: drive and a secondary 25gb SSD drive called D:. I was wondering if there is a way to install the OS on the D: drive. I have done OS installs before so I am somewhat familiar with the procedure. I also already have a Windows 10 install USB set up. I just can't get it to offer the option of which drive to install on. The D: drive does currently have a folder on it labeled Drivers and in that folder there 14 folders such as Bluetooth, WLAN , and Card reader. Is this going to be an issue when installing Windows 10 on the D: drive or will Windows re-download these drivers itself?
