So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
I'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6 GPT Partition Scheme for UEFI Fat 32 8192 Default X Quick Format X Create a bootable disk using X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM Legacy OPROM only UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
I have upgraded to windows 10 for a few weeks now and over the last couple of days it has stopped installing any windows updates, the error code that pops up is (error 0x80070643)
It's also stopping me from installing some other programs but not all.
I have tried restarting the computer, Nothing I've tried restarting wuauserv service, Nothing I've tried the troubleshooter for windows update, it says problems were found and they were fixed. I have also cleared the cache for update downloads from the following folder: C:WindowsSoftwareDistributionDownload
In the Windows update page it seems to take forever to install the updates and then throws out the following:
There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information:
Security Update for Microsoft ASP.NET MVC 4.0 (KB2993928) - Error 0x80070643 Security Update for Microsoft Silverlight (KB3080333) - Error 0x80070643 Security Update for SQL Server 2008 R2 Service Pack 2 (KB3045313) - Error 0x80070643 Update for Microsoft Visual Studio 2010 Tools for Office Runtime (KB3001652) - Error 0x80070643
Note: this is after clearing the cache in the above folder location.
It says internal memory is not enough, I even tried using external USB or external but still I can't install Windows 10 Fall update on my new Windows 10 Tablet.
I have a Toshiba that I wanted to run Windows 10 Pro, the OEM was Home; I have Windows 7 Pro and decided to install that and do the upgrade and then a clean install, I needed to run Legacy Mode to install Windows 7, after the install and upgrade I wanted to change it to UEFI but since that isn't possible to do without doing a clean install or a recovery media device, I can't and don't want to do that.
If I do a clean install of Windows 10 Pro, from a USB and delete all partitions, will Windows 10 activate?
I have done so on my desktop, it has worked, BUT when I did it on my Toshiba after it activated to Windows 10 Home, it failed to activate during the clean install. What are the chances it won't activate this time? The process from Windows 7 to 10 isn't fast and I don't want to have to do that again..
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?
I'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
I'm booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
Successfully upgraded to Windows 10, all applications and settings works perfectly and all previous problems are gone.
I've been facing a collection of annoying problems with my Windows 8.1, specifically setting saving problem, for example can't save settings like default app, folder and icon size, i didn't update to Win10 yet because i am working on very important projects.
My question is, do you think this kind of problems will be fixed after updating to Win10 by keeping all my files, programs, etc... ?Or should i do a clean installation of Win10 so my computer will be "system-new".
I have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous version of Windows and I end up back at Windows 7.
I don't know if there's any logs somewhere I could check to try to figure out what the problem is.
Do I have any options for upgrading this laptop if the update from 7 to 10 won't work? From what I've read I need to get the in place update to work in order to get a valid Win 10 key so I might be screwed...?
Will windows 10 update provide a product key for clean install? If so how/where?
If not when performing a clean install, will skipping the product key prompt, then activating once desktop appears automatically activate and inject a product key?Lastly rather than extract the esd file, where to get a genuine Microsoft iso's on release date?
Get Important updates: cleared. Gets windows 10 ready but then it Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition Dialog crashes. Does not allow one to choose which partition
Gateway Nv59 64 bit Intel 430m Duo core Windows 7 Premium 500GB hdd 8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..
I currently plan on doing a clean install on a new ssd of Windows 10. My current mobo is a ASUS P8z68-V which has UEFI so I plan on doing a UEFI installation of Windows 10. However, I plan on getting a new processor and motherboard sometime in the future, so would I have to do a reinstall of Windows 10 when I get my new motherboard, or could I expect it to boot up normally as would a traditional BIOS system would work?
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
