Installation :: Can Install With Very Small C Drive
Aug 22, 2015
I have an old PC I use for testing things. I want to install Win10 on it before installing it anywhere else. But this PC has an 80GB SSD C drive. Currently it has only 12GB free. I can free up maybe 6 or 7 more GB by removing a bunch of USER temp data (if I'm brave enough), but that is still way below the Win10 system requirements. I have 2 additional internal drives, 512GB each. (Seemed like a lot 5 years ago.) The D drive has over 400GB free. Is the Win10 installation smart enough to use space on the D drive, or am I going to have to replace my small SSD with something bigger?
I have a HP Pavilion 23 all in one PC (23-f221ea) and the 1TB hard disk is getting rather full.. I want to change for say a 4TB drive, I know that I can't clone my 1TB drive to the 4TB drive using something like Acronis as max is 2TB and the new 4TB drive will have to be GPT formatted. I have already updated my PC to W10 with the ISO disk I made from MS update.. Can I install the larger disk GPT formatted and install with the ISO disk I made??? Or will I have to start all again and install with Win8/8.1 first..??
So i have the latest windows 10 version, but i cannot seem to install apps to any where except the C drive. And the option to change is disabled. See image attached.
A few days ago I got a new Win8.1 laptop that I smoothly upgraded to Win10. This laptop now shows as being registered with Microsoft. I just now purchased a 250GB SSD that will arrive in a week or so. I want to install Win10 on this new drive. A friend just gave me a DVD burned with the Win10 ISO. When I get my new drive I'll install it into the laptop. Then I'll boot from the DVD and (hopefully) do a *clean* install of Win10. And (hopefully) Microsoft will recognize the laptop as already officially registered. Will this plan work? Am I missing anything important? Do I need to get all the drivers first? Or will the upgrade process grab all the needed drivers? My friend said when he did this process it got all the needed drivers. I already did a backup System Image of Win10 to an external hard drive, and I made a System Recovery DVD. There's no personal files or documents on the existing Win10 drive.
When I download my free version of Windows 10, I want to install it to my 128gb SATA drive which is now labeled Drive S, and keep my current installation of Win 7 Ultimate on drive C in case I want to revert back to Win 7.
How do I install Win 10 on my SATA drive, change it to become the bootable drive, and retain Win 7 on drive C? Also, if I decide to revert back to Win 7, what process do I go through to revert back to the old Drive C?
Windows install says ( Can't install on USB flash drive.). That's how it sees my SSD. Do I have to put my original HDD back in, image SSD to it and then try to install?
I upgraded both of my PC's from Windows 8.1 Pro. If I want to do a clean install from a USB drive do I need one from each PC or will one work with both?
when I installed windows 7 Pro 64 bit on a new build, a few years ago, I had to install some specific drivers during the Windows 7 installation to ensure drives used AHCI mode. Do I still need to do anything during windows 10 clean install to new SSD drive in order to achieve this (I did not see anything in the clean install tutorial ) or is this all now taken care of in Windows 10?
I have successfully upgraded to Windows 10 from Windows 7 (and solved the initial network connection problems).
However my OS has a lot of crud from the pre-upgrade state and I would like to do a clean install of Windows 10, without losing any old data files. I've read online guides on doing clean installs of Windows 10, but it is not clear whether you can only install into partitions that already have a valid Windows OS installed.
My computer has two identical hard disks, one of which is (or can be made) blank so what I would like to do is keep one with the 'cruddy' version of Windows 10 - at least until I have copied over all the files I want to keep and made sure I've installed all the software I want on the new 'clean install' Windows 10.
So, are there people out there who have done this? Are there things I should look out for?
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
I currently have an ASUS motherboard (p9x79 Pro) and am running my operating system on a spinning drive and using the ASUS cache which uses a 128GB SSD drive to cache the operating system disk.I would like to dump that arrangement and run the operating system on a larger SSD drive (they are cheaper now). Ideally I would do this at the same time as moving to Windows 10 so that I only have to install once.
My question is - if I go for a clean install to Windows 10 can I put this directly onto a new clean SSD drive - using my old windows 7 key to activate it (it was an OEM key I bought when I built the system) or will I need to clone the Windows 7 system onto the new drive before installing?The motherboard will not be changed.
So my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
Yesterday I upgraded from Windows 8,1 to Windows 10. I wanted to clean install so I booted from my USB drive (which has the Windows 10 image and worked before on my other PC) and it didn't work.
Something was corrupt with my registry on the C: drive so I formatted it. Now I can't boot obviously and I get odd error messages like bad_config_info or something like that. I can't even clean install on the damn drive, it gets stuck after copying files.
I really need my laptop ready over the weekend, because my current PC is garbage and also blue screens with Memory_Management. I'm not even bothering with that on a 6 yr old PC.
I've already upgraded to Windows 10 on my desktop PC, and there were no issues with the upgrade. However, I work from home and my work has informed me that they won't accept Windows 10, they will only accept 7 or 8.1 as their operating system (they also only accept Internet Explorer for browsing, etc.). So I can either downgrade, which I really don't want to do, buy a second PC, which I can't afford to do, or (I'm hoping) create a new partition and run Windows 7 from that.
So my question is, is it possible to create a new partition for Windows 7 while running Windows 10 on my main partition? Will I have to downgrade and install Windows 10 later? Or can I do it from Windows 10 already?
I previously used windows xp and just went and bought a new hard drive and windows 10 usb. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive..
I am about to get a new 240Gb SSD and have been advised to clean install Windows 10 on it. This SSD will replace a SATA HDD in my existing computer running Windows 8.1. I know that I qualify for the free upgrade; I have the "Get 10" icon on my task bar.
My first question is, can I get the 10 installation media without buying it and if so, how?
Do I need to upgrade the computer to 10 before replacing the OS hard drive with the new SSD and clean installing?
I have a laptop and a desktop with a 120 gig ssd and a 64 gig SSD respectively. Both computers have conventional hard drives as drive D. I have two 250 gig SSD's on the way. What is the best strategy for moving to the new SSD's and preforming the clean install of Windows 10. The desktop is running Windows 10 insider preview 130 and the laptop is on Windows 8.1.
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
I'm about to build my first desktop, and I have a laptop with Windows 10 (upgraded from 7 which it came with). I don't plan on using the laptop anymore, so is it possible to install the laptop's hard drive into the desktop then move the Windows install to an SSD? If not, should I just buy a Win10 key or would it be possible to contact Microsoft about transferring the OS over?
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
Basically, I plan to disconnect every other Drive from my computer (my 2nd SSD and the HDD I use for data storage). From there, I'd do a clean install of Windows 10 onto my SSD.
Will that SSD become my C Drive by default (I want it to)? Will is stay that way when I reconnect my other drives provided I continue to boot from my SSD?
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
