Installation :: Can Only Roll Back To Last Build
Aug 4, 2015
I'm trying to roll back to the OEM Win 7 on this machine. On the setting page "Updates & security" the options under "recovery" did NOT include rolling back to Win 7. The only choice was to roll back to the previous build. I thought perhaps I would have to work my way back to 7 build, by build. I started out with 10041, then 10130, then 10240. I clicked the "Back to previous build, hoping. Well, it went back to 10130 no problem. However, that is it. Going the Setting, Updates& Security route within this roll back of 10130 there is no way to keep going back to finally get back to Win 7.
View 4 Replies
Similar Messages:
Dec 21, 2015
After experiencing difficulties with the last windows update I decided to roll back to previous working build (10240). Now some of Windows 10's apps are not functioning. If I open e.g. Calculator, Photos or Store, the app's window will flash on the screen for a second or two before closing.
The effected apps also take a different appearance in the Apps & Features section of the settings with the "move" and "uninstall" buttons greyed out and the names being less user friendly, I've attached a screenshot below. Is there are way to get them restored?
View 2 Replies
Aug 17, 2015
I have been running Windows 10 Pro on my HP desktop for overa week with no problems. Over theweekend Windows attempted installing an upgrade; not sure when, but during theupgrade process I received a Critical Process Died BSOD with no error code. All system restarts result in the same error, and I havebeen unable to use Repair, Recovery Mode, or Safe mode to isolate theproblem.
The only usable option seems tobe to do a System Restore where I have the choice of losing all installed apps,or losing both all installed apps and files. Is there any way to roll back to the Windows 8.1 that isstill located in the Windows.old folder from the command prompt?
View 6 Replies
Jul 19, 2015
I did a system restore and I lost activation (Im on build 10130). Is there any way to roll back to 8.1 and wait for official update? I can't update to newer builds either, WU shows no new updates.
View 8 Replies
Sep 17, 2015
I am sick and tired of this new win 10 pos operating system, can I roll back to something that works...like win 7?
View 5 Replies
Sep 26, 2015
I upgraded from windows 8.1 to windows 10. after a month, my system crashed due to inaccessible_boot_device issue. I tried everything, but had to go for a fresh install of windows 10. then came the issue of activation. No matter what i did, it wasnt getting activated. So, now the customer care at HP has asked me to install Windows 8.1 again. and then upgrade.
My question is, should I install Windows 8.1 Single Language itself, as it was my original OS, or can I go for Windows 8.1 Pro. Will Pro dvd have the option of Single Language in it? Media creation tool is not working for me, that is why I'm trying to download Pro via torrent and then install Single Language.
View 1 Replies
Jan 17, 2016
After some software problems, The fix was to Refresh my PC, despite me selecting "Keep my files" it removed loads of my software including ones I cannot get without a disc,
Is there a way I can roll back to before I did this, since I still have the Windows.old file with all my things in, Do I just Copy and replace my files with the things from Windows.old to the new one or is there a way to roll back completely?
installing all my stuff again is not worth for a temporary fix.
View 1 Replies
Aug 22, 2015
So, i absolutely hate windows 10 and MS for making it, so i am more than happy to go back to Windows 8.1. Only problem is, that i cannot.
Roll back option in recovery is gone and i haven't gone for 30 days. So, naturally i went for my trusty old 8.1 ISO that i made, only thing here now is that doesn't work either. I get this: "setup has failed to determine supported install choices" ... So..... What can i do?
View 16 Replies
Jun 19, 2015
How can I rollback to Windows Phone 8.1 from Windows 10 Mobile using my Mac? Is there any possibility?
View 1 Replies
Jan 29, 2016
So, recently (after the November build release) I woke the next morning to find that my computer underwent a rather major update. After which, it seemed, my home network was thrown out of wack. I immediately rolled/reverted/recovered to previous build. But now everything is out of wack. Most of the time I have to restart my computer just so it'll communicate with my printer to start printing.
And restarting the computer is twice as long if it restarts at all. Most of the time It gets stuck in the "restart" progress animates (the rotating circles) and I have to press the restart button on the computer tower, with great regret and dread. Transferring files from one windows 10 device to another is a 50/50 hit or miss. I'm not literate when it comes to networking and was super happy how everything was.
But now, not only is my wifi home network out of wack, but my computer itself is wonky. I figure I might as well reinstall the newest build in hopes that it'll at least fix a fe of the problems. But anytime I check for updates, the newest build no longer shows up.
View 1 Replies
Jul 22, 2015
Will I be able to roll back to Windows 7 from Windows 10, using Windows Recovery Disc which I made as a Backup for my Hp Pavillion. I know this question may sound silly, but has a point in case Windows 10 doesn't have certain features which I m using on my PC currently e.g Remote desktop.
View 1 Replies
May 2, 2015
I tried updating to the latest build but when my computer restarts and turns back on, it gave me this error.
0xc1900101 - 0x30018
Here's a picture. Imgur
View 5 Replies
Jun 17, 2015
I've got a Nokia Lumia 530 and it was running happily on Win10. With the new build out you had to firstly roll back to 8.1 Update 1, then install Windows Insider and update.Unfortunately I don't seem to have enough drive space to do the update. It needs 1.35 gig and although Storage Sense says 1.39 gig available, it won't progress due to insufficient space. Must be some temp files or something.I've moved every app I can over to the SD card but to no avail.
View 2 Replies
Jul 5, 2015
Upgrade install from the same build is that possible? I want to try an experiment.
View 8 Replies
Jul 21, 2015
It seems when updating online between builds, settings are lost, registry tweaks etc.
View 1 Replies
May 30, 2015
I am just about to clean install from build 10074. I assume that it will update to the latest build once installed. I was wondering if I need to install drivers and wot not before upgrading via WU or do that after the upgrade to 10130 is compete.
View 6 Replies
Dec 3, 2015
I tried updating normally using Windows Update. It fails in less than 10 seconds.
I tried using Media Creation Tool. It downloads the update, but at the end it fails again and tell me restart my PC and try again.
I tried deleting the files at C:/Windows/SoftawareDistribution/Download and then going back to Windows Update. It didn't work.
this Build is crashing and freezing in almost any game that I play or application that I use. I'm only able to use Chrome and Office properly. Everything else usually freezes and crash.
View 9 Replies
Jul 4, 2015
Right, so I've got a laptop that I'm currently trying to install windows 10 tp onto. It's the exact same model as the one I'm running on (it's my brothers, and I'm trying to fix it for him), but I've hit a snag.
The insider program website says that you can burn the .iso to a dvd and install it like that, but I've done that, and the laptop just stalls at a windows logo screen.
There's no operating system currently installed -- all 900 someodd GB are free and, using a windows 8 install disk to access a command prompt, DISKPART says the partition is healthy. I've cleaned and formatted it several times now to no avail.
View 9 Replies
Oct 15, 2015
after the installation of Build 10565, i cannot longer join the Homegroup.
Tried this:
[URL]
no good at all.when i need to do the last step to give users full control, this does not happen. But i am administrator and own "MachineKeys". So i have full control.....
in my network i see 2 pc's, mine and one other. All 3 others computers do see 4 computers.
View 9 Replies
Jan 28, 2016
I grabbed the install.esd from the upgrade from 11102. Created an ISO using DVD and USB. However, I get this "setup cannot continue due to a corrupted installation file". Tried going back to 11102 and repeated the process three time. Still same thing. (I have grabbed the install.esd file before and after the installation but it didn't make a difference. I'm trying to do a clean install by the way. Otherwise I just have to live with the updated OS.
View 3 Replies
Jun 2, 2015
Am trying to install build 10074 on a freshly formatted (no dual boot) 256GB SSD in my Dell XPS 12 via USB. I get through the installation, reboot, do the initial setup, provide my MS account, then get stuck. White screen with frozen ball circle and "Just a moment..." displayed.
View 9 Replies
Sep 19, 2015
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
View 4 Replies
Jul 30, 2015
For a few weeks I'm already stuck in Build 10166 of the Windows Insider program, Microsoft said that insiders would receive the launch version before public but I still haven't received an update to the final version yet. However non insiders already have the final version. I'm refreshing the Windows Update every half an hour and it only gives me Windows Defender updates every now and then.
View 9 Replies
Dec 10, 2015
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
View 9 Replies
Jul 20, 2015
I just noticed something odd tonight when browsing through my photos in Windows 10 10240. Almost all the pictures from my camera roll are blurry / low res when viewing in the new photos app. I compared them side by side on my other PC right next to it running 8.1 pro and it is night and day. The same pictures appear crisp and clean in the traditional windows photo viewer. I know that i have two different monitors with different resolutions but i never noticed a problem before when i had 8.1 on the pc that now has windows 10.
I think this is a real problem with the app in windows 10 because a) when i zoom into those photos that are blurry they become clear when zoomed in enough and b) it is very noticeable, something that i never picked up before when i was on 8.1. Now when i view wallpapers or downloaded images from the internet they seem to be clear so it doesnt really make much sense why it is just my camera roll pictures from my Lumia 929.
View 5 Replies
Aug 29, 2015
Here's a screenshot of how the recovery option looks...
View 7 Replies