Installation :: Cannot Create Partition On Selected Disk
Jan 22, 2016
Trying a Windows install on a Server box with 4 HDD's installed. This server also allows boot from a Micro SD card. I've got a 64GB micro SD card loaded as well.
Fails when trying to create any partition on any of the HDD's. Works if I temporarily remove one HDD or take out the 64GB internal micro SD card.
I Get a message "Windows cannot create partition on selected Disk" - even when totally empty. It doesn't matter if GPT or MBR disks either.
Seems that if you want to install a non server version of Windows (i.e Windows 10 Pro for example) 4 HDD's is the limit (a micro SD card counts as an HDD).
If I install Esxi on the SD card then no prob creating Windows VM's without removing HDD's.
I think after w10 is installed you can add more HDD's.
I don't want to lose my Windows 7 so I have Windows 2000 Full, Vista upgrade, Windows 7 upgrade, Windows 8 upgrade, so I figure I somehow put in Windows 8 upgrade however I get a message saying "Windows cannot be installed to this disk. The selected disk is of the GPT partition style" I think I know why is because I had the BATA Windows 10 on this disk and I can't delete 2 of the partitions.
Asus laptop with 8.1 installed. One disk, 2 partitions. I've installed 10 a number of times, VM and dual boot on desktop.
Went to install 10, dual boot. When I got to picking the partition, said "Cannot be installed, selected disk is of the MBR partition type."
Installed my Aomei Partition Assistant and changed to Disk to GPT. Now when I go to select the disk, it says "Cannot be installed, selected disk is of the GPT partition type.
i got the windows 10 upgrade from windows update, downloaded it and installed it. went to microsoft website downloaded windows 10 to put onto a usb drive. before performing a clean install i partitioned my drive and dropped around 230gb of stuff on it (967gb total drive, partitioned 280). when i tried to format the drive i encountered this issue
"windows cannot be installed to the disk. the selected disk has an mbr partition table. on efi systems, windows can only be installed to gpt disks.".
I don't know if the problem is my hdd or my usb drive or my bios. i tried deleting the partition and then pressing new but i continue to get the same error. i tried looking around but i cant make any sense of the posts with this error being solved. one of the posts says to change usb efi to gpt in bios but i dont think that option is in my bios (i can post a picture of bios if needed). another option is to clean the entire disk with cmd but i dont want to lose the other partition.
I keep getting an error when I install Windows 7. I want to install Windows 7 alongside Windows 10. windows cannot be installed to this disk the selected disk is of the gpt partition style
I read solutions to this and most of them write I must format my entire hard drive, but I can't do that because that would mean losing all my data.
The error in the title appears when I try to format my C partition to install windows 10 there. This error does not appear when I install windows 7,I just formatted and installed 7 successfully however it doesn't work for Windows 10. Specs
Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?
I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...
would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...
I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this means, as I have repeatedly formatted and erased the partition to no avail. I do have another partition with Windows 8.1 installed, so I am trying to salvage that and get the Windows 10 installed onto the other one.
For some strange reason. On boot, It asks me to pick either Windows 8.1 or Windows 8, and Windows 8 isn't installed...
This laptop is a mess. I bought it used, and it has only given me issues. Luckily I have my Desktop so it's not like I rely on this laptop.
I had a kali linux installed in my computer. Then I tried to install Windows 10 using a bootable USB drive. (I created it by downloading the windows 10 ISO and then creating USB drive using Rufus.) But when I was trying to install windows 10, it shows my hard drive, but it doesn't installing to it. Error message is the following:
Code: We couldn't create a new partition or locate an existing one. For more information, see the Setup log files. Then I checked for the log file (X:Windowspanthersetupact.log) It has this message:
Code: LogReasons: [BLOCKING reason for disk 0: CanBeSystemVolume] The selected disk is not the computer's boot disk I know that right ? USB disk is the boot disk here. Then I searched in the internet for a solution.
I came up with this: [URL]...
I followed all the instructions there. Cleaned my hard disk using DISKPART and formatting and stuff. Then I rebooted my machine. But, still it shows the same error.
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
First of all, I upgraded to windows 10 from windows 7. My device is a ASUS K55vd notebook. When I was running on windows 7 I successfully created a factory image disk via ASUS ai recovery application (a five bootable disk). Then I decided to upgrade my hdd to ssd. My idea is to have a clean factory installation of windows 7 on ssd so I didn't clone my old hdd.
What I did was mount the ssd and ran my recovery disk and successfully installed a fresh windows 7, it is then when I update my windows 7 and went to windows 10. Currently I'm running on windows 10 and there is the notification of creating a factory disk which I would like to do but as soon as I start burning the disk it says that the recovery partition does not exist even though I have my recovery drive ( R: ).
Next, I tried creating system repair disc from Control Panel>System and security>Backup and restore (windows 7) then this prompt came. "The selected disc cannot be used. The selected disc does not contain a valid Windows installation."
Lastly I tried creating system image also from Control Panel too. However it failed and says that the mounted backup volume is inaccessible.
In my reagentc /info:
In my disk management:
I would like to ask for some solution regarding that and I'm wondering if the previous factory image disc that I have from before (win 7) is still usable if I decided to factory reset my pc? And can I make a bootable disc in which it reverts my windows to the point where I freshly upgraded to windows 10 so that I would relieve myself the hassle of upgrading again to windows 10 when the factory image disc work (in which it will surely reverts my windows to win 7).
I created ISO disks for both my 32 bit and 64 bit systems at the MS download site. If I use the ISO disk instead of the Windows Update method, does the install still create the W7 image in case I want to go back to W7 after installing W10?
Also, do I boot from the disk or do I go into the ISO disk and click on Setup?
Last night I wiped out my ASUS T100 tablet to clean install TH2. But there is a 7GB Recovery partition from Windows 8.1 that I can't get rid off using Diskpart.
So I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
If so, I don't have one... I look in Drive management and SSD is all one partition, I assume 232gb is what a 250gb ssd looks like formatted. Is that going to be a problem if I ever run reset or does windows hide all those files somewhere else?
I know I had one before on my old install but it was an update from win 7.
My wife purchased a Dell 8700 XPS with i7 4790 processor,16GB ram. and Nvidia GeForce GTX 745 4GB and a 2 terabyte hard drive. She also purchased a Kingston HyperX 120 GB SSD. I used a popular software to migrated Windows 8.1 Home to the SSD from the HDD. This seemed to work well but on booting up the system the HDD boots unless I go into the bios and select the SSD in SATA 2 under the DVD reader/burner and select a {boot manager on Disk 1{ which was installed by migration software. I had hoped to format the HDD and use as data disk afterwards.
I noted that some threads mention I should have disconnected HDD when booting from SSD first time which I did not do.It also appears that the OEM partition is still on the HDD. I believe a clean install is required. Will this also remove the > boot manager on disk 1> line in the bios.
Not long installed the new Windows 10, but I had to change my language pack from English - United States to English - United Kingdom, now I'm trying to activate Cortana, but comes up saying Cortana isn't supported in the region or language you've selected.
I have my system built but when i try to install windows 10 onto my kingston 120gb ssd its stops on 6% and it says in the bottom left that windows cant be installed to this disk the selected disk is of the GPT partition style i have never installed windows before...
I recently purchased a new Windows 10 laptop (HP), which I presumed is a 'clean install' and I'm mooching around looking into how to create a recovery disk. Anyway, when I go into control panel, underneath System and Security I see a link that says; Back up and Restore (Windows 7).I'm wondering why there's a reference to Windows 7 on my Windows 10 device?
I want to know whether I can create a Windows 10 USB boot disk from a folder in my PC(NOT an ISO). The folder contains all the necessary setup files for the the installation that were created by the Windows 10 media creation tool.
I could not load a disk with OS software and received this error message. "Disk has MBR Partition Table. On EFI Systems, Windows Can Only Be Installed On GPT Disks".
I just assembled a new PC. It has a single 4TB hard drive. During Windows 10 installation, I created a 200gb partition to install to as the C: drive. It auto partitioned my drive into a 500MB system reserved partition, my C: drive, and two unallocated spaces of 1852.69GB and 1678.02GB respectively. The 1852GB space I can create a partition on, but the 1678GB space I cannot do anything with: Cannot create a partition, and cannot combine it with the rest of the unallocated space.
I would like to combine the two unallocated spaces to create a single partition from the remaining unallocated spaces, but cannot figure out how. I contacted Microsoft tech support via chat, allowed them to remote in to my machine, but they could not determine the issue either.
I am trying to install windows 10 via USB on my HP Pavilion G6 Laptop, I deleted the hard disk partition to create new partition, but now when I select that partition, it says that Windows can't be installed on this drive as it is GPT partition. I enabled Legacy boot, still it gives me same message. I tried to create a new partition, it says that it will check to ensure that windows feature works properly and upon clicking OK, it gave this message after a minute : We couldn't create a new partition. Error 0xbdba5840
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
