Installation :: Cannot Format Windows - Stuck After Asus Logo
Sep 1, 2015
I bought an asus tranformerbook t200(with windows 10 update) on 11 august and was very happy with it.
Occasionally, the laptop couldnt find any wifi networks but that was fixed quickly by just turning the computer on and off, until today.
Today at school(my second school day at university), i had no internet anymore. He didnt find any networks anymore at all. Turning the laptop on and off wouldnt so a thing. So i tried some things, like turning the broadcom device on and off via device manager. That also didnt work. A user in the internet on another topic suggested to delete the broadcom and then reboot, i did it and things only got worse. My laptop didnt recognize the broadcom wifi adapter anymore at all.
Then I tried to format windows(with saving documents addition) which unfortunately failed. After that, i tried to format it and added the option that everything would be cleaned, that failed also. c windows system32 logfiles srt srttrail.txt is apparently the error.
Now if i start the laptop, the asus logo will show but thereafter the screen just turns black. I tried system recovery and even startup repair but both fail.
View 7 Replies
Similar Messages:
Aug 4, 2015
Samsung RC510 - Got stuck at windows 10 logo when trying to boot into USB.
BIOS Type:PhoenixBIOS Date:January 19th, 2011BIOS ID:03HU.M008.20110119.KSYBIOS OEM:03HU.M008.20110119.KSYChipset:Intel 044 rev 2SuperIO:UnknownManufacturer:SAMSUNG ELECTRONICS CO., LTD.Motherboard:RC410/RC510/RC710
View 9 Replies
Feb 10, 2016
The other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. T
View 2 Replies
Oct 7, 2015
I downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)
My system config is below
Intel i5(4th gen)
Gigabyte H87 D3H(which has UEFI) and flashed to version 9
Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10)
8GB RAM
SSD(60 GB, which has corrupted win 7)
HDD(500 GB)
Believe I have the minimum system requirement to install Windows 10?After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX).
But even then it doesnt move forward from the windows logo screen. how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg
View 5 Replies
Jul 27, 2015
So I found this issue in my second laptop that running W10TP. I have HP as my first, and ASUS as the second one.
In my ASUS (2nd) I can't booting the laptop without force shut down through hold the power button, because it always stuck at Windows logo. After shutdown and boot again, I succeeded into the lock screen. But it taking too long in the blank screen for almost one minute.
This issue never happened in my HP laptop.
I've tried many methods to find this issue, system scan, virus scan, update installed drivers, driver scan (it failed). And for a couple days it work so well and I'm happy for that, no more stuck at booting.
But the issue come again after many security update for build 10240. The booting is stuck again and BSOD with pfn_list_ corrupted. After restart the laptop I've tried again all the methods that I've did. And then I found so many viruses and malwares from Windows Defender. It's odd for me because it is never happened before, and suddenly of course.
After the viruses were cleaned, the issue is still persist. I want to reset my laptop from settings/update& security/recovery/reset. Is this necessary to do considering W10 will come in 3 days left?
View 1 Replies
Aug 24, 2015
I have a Lenovo G500 upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stuck in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files) .
View 1 Replies
Jun 29, 2015
I have a Windows 10 computer, but whenever I try to turn it on. It just gets stuck on the windows logo. I have tried a recovery USB, but it hangs as well on the windows logo.
When I tried doing an automatic repair, it also hung on the windows logo with Preparing Automatic Repair for hours. I am doing this for my friend, and he doesn't want to loose his important files (yes, i know, he should have backed them up).
View 1 Replies
Aug 15, 2015
I downloaded Media Creation Tool 64 bit.First i clicked "Upgrade my PC now" it downloaded Windows 10 and asked me to reboot. After that blue windows 10 logo appeared I have waited like 2-3hours but nothing happened. I tried even installing through USB but same thing blue logo appears and nothing... Why can't i install Windows 10?
PC Specs:
CPU:Amd Athlon II X4 641 Quad-Core Proccesor 2.8ghz
GPU:Amd Radeon HD 6700 Series
RAM:4GB
OS:Windows 7 64bit
View 1 Replies
Jan 21, 2016
System: i7 950 X58A-UD3R Rev 2.0 16gb Ram GTX760. Pretty sure it's a Samsung 250gb SSD.
So I upgraded W7 to W10 via iso. Install made it all the way.
On reboot it's now suck on the black background, windows logo and spinning dots.
View 2 Replies
Nov 5, 2015
Background: So, I have an ASUS R557LA-XO1543H laptop. That i supposedly only needed to reset totally and then install F-Secure Safe, well after the reset, on the Windows 10 installation, when came the step to create a Microsoft account(or skip it, which i wanted to do). So at this point i realized, the touchapd doesnt work, nor did anything happen when i plugged in a mouse.. keyboard nothing as well, so i decided to shut down and restart it, well, then it went to the "defaultuser0" screen, which i found a solution to (hold shift, restart, go through certain steps and create a new account), well after i restarted the laptop at the point i had created a new user, as the guide told to, the laptop would only go to black screen after the ASUS logo. So i tried mashing some buttons, and eventually i got to my current problem.
So upon boot the ASUS laptop, after the asus logo, goes to this state "moving to hibernation". Yet I havent found any solution to this, and to speed up the process of finding a solution im posting this here.
ASUS laptop goes to "moving to hibernation" after the asus logo on boot.
View 1 Replies
Feb 10, 2016
If so, what are my options? This HDD came from HP w/Win 7. I upgraded it to Win 10 but would like to clone it to the SSD for the speed increase.
View 2 Replies
Oct 10, 2015
When I try to install windows 10 into my newly built pc, everything goes normally... then it says that the pc need to reboot, and it does. After the reboot, the windows logo appears and it brings me back to the windows installation process.
View 1 Replies
Jan 9, 2016
When i boot my pc up, it can successfully go into bios, but once it reaches the windows logo where there is usually a loading indicator underneath it, it freezes. the loading indicator is not there, it seems that my usb ports quit working (my keyboard and mouse stop lighting up).
I've been having this problem for quite a while now ever since i upgraded from windows 7 to windows 10 however i was able to successfully do a usb boot and wipe my hard drive and install windows over again, and I've been completely fine for about a month now, but the same thing is happening again.
I am guessing it is a corrupt windows file but i find it odd that its recurring even after i did a total wipe. Also I ordered a new ssd (500gb samsung 850 evo) to replace my current hdd, maybe that will fix this problem? I am also planning on upgrading my cpu, mobo, ram, and gpu soon. i will leave my current pc specs below.
cpu- AMD Phenom II x4 955
mobo- Biostar TA790 GX 128m
gpu - Zotac GTX 560 1gb 256 bit DDR5
ram - 2x2gb DDR2
I have not found any problems similar to this online. to make things clearer, i cannot get my pc to do a complete boot at all. it always freezes on the same screen, the only way i can get out of it is to do a force shutdown. I am starting to think that perhaps the problem may be my video card? also i do not have any spare parts or other computers to switch parts and test unfortunately.
After doing multiple things to find a fix (swapping ram slots, unplugging hdd and gpu and plugging back in, etc.) while on the frozen windows logo screen i unplugged my mouse and keyboard, plugged them back in, hit the restart button on my pc, and.. it started up? now i have noticed lag-like performances with my mouse (razer deathadder chroma) its as if it loses connection for a split second and the lights on it will simultaneously flash. the mouse is only a month or two old and i do not remember if i had problems with my old mouse.
I have just plugged it into a usb port that is on the side of my pc instead of plugging it into one of the back ones. I will update with if needed for the "lag" however i am still concerned with why exactly it froze like that during boot up. im not going to shut down my computer until i know what the problem was and how to fix it. ill just keep it in a low power setting when i am not using it.
View 1 Replies
Feb 6, 2016
So I decided I would try and put an SSD in my old Asus as it is quite slow. So before I cloned the drive I tried to reset it using the MS option in the settings. The first time it failed so I tried again and then got the same message saying it failed.
Now I am stuck in a bootloop, where it gets to the initial Asus screen, goes black and then loops back to the Asus screen.
Tried pressing F8 & F12 but doesn't get me anywhere, although Esc got me into: Please select Boot device so I think if I can just get Window 10 on the SSD and install I'll be good to go.
So I thought I would re-install W8 and then upgrade, however the guides say I will need the security key which for some reason is not on the Asus as it usually is on every other machine I have owned!
View 9 Replies
Nov 5, 2015
My Asus T-100 hybrid tablet/laptop won't wake up from hibernation. It tells me to swipe to shut down computer and nothing happens. I ran down the battery, plugged in and then recharged. It's still stuck on hibernate and won't let me into windows at all.
View 2 Replies
Aug 12, 2015
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Msi motherboard ...
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
View 1 Replies
Jul 31, 2015
I currently have Win10 32bit. I made a bootable USB and DVD to upgrade to the 64bit version, both yield the same results. Each time I try to perform a clean install, it just hangs at the blue windows logo, no spinning circle just the logo. I let it sit for about 4 hours and nothing changes. I've tried many methods but none seem to work.
Core2Duo 3ghz
4069 RAM 560ti video card
1 terabyte HD.
Intel P35 BIOS for P35-DS4 F12
I also have my hard drives partitioned
Legacy mode BIOS
View 1 Replies
Aug 11, 2015
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Its an Msi motherboard ....
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
View 1 Replies
Aug 24, 2015
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 Replies
Sep 25, 2015
I've got an Asus X205TA running windows 10.
Without indication or warning, stuff starts refreshing. Web pages ocassionally refresh on their own, even when I am in the middle of something. Sometimes they get stuck in a refresh loop, and the right/left click stops working (trackpad still registers movement, just no clicks) The little refresh circle spins, and even if the page loads completely, it almost immediately starts refreshing again. I have to hit Control+W to shortcut exit out of the tab, then Control+Shift+T to reopen.
Other times, only the mouse click stops working. I can still navigate with shortcuts, two finger taps (for right click) and the enter/tab keys.
Often these workarounds do the job, but sometimes only a reboot gets it back to working condition.
I've tried 5 different browsers - IE, Edge, Vivaldi, Chrome, and FF. Same issues on all of them.
The issue also pops up (but less frequently) in file explorer. Pages get stuck in a refresh loop just like the browser. This leads me to believe it is not a browser specific problem.
View 3 Replies
Aug 27, 2015
Why, after rotating a photo from landscape format to portrait on my PC, does the thumbnail stay in landscape format even though the photo is now in portrait format?
In Windows 7 and previous Windows OS's, the thumbnail of photos rotated with the actual photo but in 10 the thumbnail does not rotate with the photo. How can I correct this?
View 4 Replies
Jul 30, 2015
I have done the update once, waited around 2/3 hours. i then reset my PC. i then did the update again, waited at least 5 hours. still stuck at 32% if there is a fix for this, i will do anything. i have a brother who did this update. My laptop is a pavilion 15 8gb ram radeon hd 7600g win 8.1
View 1 Replies
Jun 28, 2015
I tried to upgrade my Windows 7 laptop to Windows 10 but after it restarted, it got stuck on the loading screen.
Windows 10 (x86 build 10130)
View 4 Replies
Jun 14, 2015
Followed the tutorial, extracted the iso. Ran set up. How long should I let it stay at 0%
View 3 Replies
Aug 1, 2015
I was updating with mediacreation tool, and it stuck at %93 black screen There is not cursor, says it is configuring settings %75 .....
View 3 Replies
Aug 28, 2015
I know that it is advised that one should not format a SSD without the Quick Format option enabled.
However I want to start with a completely clean SSD. This is not my C drive (Windows 10) but rather a second SSD used for certain applications. Question is, will doing this degrade the SSD's performance (i.e. speed and efficiency) or only theoretically reduce it's lifespan by one read/write process?
View 6 Replies
