Installation :: Cannot Go Back To Previous Version
Dec 20, 2015
When I installed windows 10, something went wrong and I could no longer could connect to the internet because some protocols were missing. Also, within five minutes of starting using my computer, the start menu stopped working. I have tried all the fixes I could find for the start menu including sfc /scannow and multiple powershell fixes. None of them worked. When I use the windows 8.1 install disk it, I get a message saying that something happened, setup has failed to determine supported install choices. Windows 10 is difficult to navigate and always seems to be missing some software.
View 2 Replies
Similar Messages:
Jul 30, 2015
I was installing W10 and got that black screen with the big white circle. Then, once it restarted. When it booted again, suddenly a screen came up saying "Attempting to Recover Installation" then saying "Restoring your previous version of Windows....". Why does this happen? Is there any way I can change where it boots into?
View 1 Replies
Aug 21, 2015
i bought my laptop 2 years ago, and it was running windows 8, i had a lot of trouble with it and decided to downgrade it to windows 7, i pirated a windows 7 ultimate edition and my computer worked ever since, now i want to upgrade to windows 10, i have the icon, i reserved my copy, but it has been downloading for more than a week, and when i click view download progress, the get windows 10 app just shuts down. is there any way for me to get a free upgrade (using the windows 8 key that came with my laptop) to windows 10?
View 5 Replies
Jul 30, 2015
The download of w10 got completed and the installation after 95% restarts and says restoring your previous version. now it is again downloading the 2700 MB.
View 1 Replies
Nov 28, 2015
I currently encountering a problem restoring files from the shadow volume. I do not see any version history when I click the previous version history tab. Using a third party tool like shadowexplorer I am able to see the previous versions. Exporting the files out from the shadow volume also is incomplete with file errors. Any way for me to restore fully some files from the shadow copies ?
View 3 Replies
Aug 13, 2015
The update gets somewhere around 75-80%, but then it says "restoring previous version of Windows." When I load up Windows 8.1 again, I get this error.
View 10 Replies
Sep 17, 2015
During the week i had the windows 10 upgrade install onto my Toshiba Satellite laptop that was running Windows 7. Windows 10 did open but then crashed as it was booting up stuck in an error reboot loop. So i tried to restore the previous version of windows and it has been stuck in the boot cycle ever since. It will run a continuous loop restarting the process every 10 mins. I can't get it ti get out of this reboot loop. What to try and get my laptop up and running.
View 2 Replies
Dec 26, 2015
I am running Windows 10. After having been away for 6 days something strange is happening when I turn my computer on. The "start screen" displays a message saying "Restoring your computer to a previous version of Windows" and I can see that it is working on doing something. I quickly turned it off.
I have updated antivirus/antimalware programs that I run frequently/automatically.
What can be going on, and is there a way to avoid this restoring to start when I turn my computer on?
View 8 Replies
Aug 11, 2015
We’re sorry, but you can’t go back. The files we need to take you back were removed,(But the files are there),what next?
View 1 Replies
Dec 23, 2015
A few days ago my Pc started to act slow and slugging so i restarted it a couple of times and on the 3rd reboot it started a disc check. Once it finished it worked flawlessly BUT it had reverted to a previously unknown restore point. Ok i thought and reinstalled some programs that were missing and went to bed. Next day i booted it up and all the programs were missing again.....The same unknown restore point was back! Curious now, i installed a program, rebooted the pc, and once again, same restore point! Just what is happening?
View 4 Replies
Dec 21, 2015
After experiencing difficulties with the last windows update I decided to roll back to previous working build (10240). Now some of Windows 10's apps are not functioning. If I open e.g. Calculator, Photos or Store, the app's window will flash on the screen for a second or two before closing.
The effected apps also take a different appearance in the Apps & Features section of the settings with the "move" and "uninstall" buttons greyed out and the names being less user friendly, I've attached a screenshot below. Is there are way to get them restored?
View 2 Replies
Jun 15, 2015
I installed the technical preview on my Surface Pro (gen 1), It's great and all. Gets smoother with each update, however, I'd like to revert back to 8.1 pro so I can reserve my copy of Windows 10.
I don't exactly know if the tech preview will auto-update to the full OS when Win10 releases July29 and I've tried to search for an answer to that question and the answers I find refer to Microsoft releasing "ISOs" when the full OS comes out and I don't know how to do those things so that's why I want to revert back and reserve.
This is my first time trying out OS preview builds. I made a USB recovery drive before I installed it though. I tried using it to refresh my SurfacePro back to windows 8.1 using my USB recovery drive, but the only option I get when it comes to choosing a target operating system to refresh is just windows 10.
View 2 Replies
Jan 29, 2016
So, recently (after the November build release) I woke the next morning to find that my computer underwent a rather major update. After which, it seemed, my home network was thrown out of wack. I immediately rolled/reverted/recovered to previous build. But now everything is out of wack. Most of the time I have to restart my computer just so it'll communicate with my printer to start printing.
And restarting the computer is twice as long if it restarts at all. Most of the time It gets stuck in the "restart" progress animates (the rotating circles) and I have to press the restart button on the computer tower, with great regret and dread. Transferring files from one windows 10 device to another is a 50/50 hit or miss. I'm not literate when it comes to networking and was super happy how everything was.
But now, not only is my wifi home network out of wack, but my computer itself is wonky. I figure I might as well reinstall the newest build in hopes that it'll at least fix a fe of the problems. But anytime I check for updates, the newest build no longer shows up.
View 1 Replies
Jan 11, 2016
For those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
View 6 Replies
Aug 26, 2015
I just upgraded my laptop from windows 8 to win 10. The free upgrade of course did not delete my files from window 8 so I went ahead and installed windows 10 on to my USB and booted from it for a clean install. While installing win 10 however I managed to do it on my C drive. I believe my previous OS was on D drive as when I go into my system properties now, C drive = 373 GB free from 393 GB which has the windows icon over it to show that OS is inside it and the 'D' drive has only 43 GB free from 393 GB capacity.
I would like to free up my D drive and delete all previous files and maybe also remove partition and only have one storage which is C drive. How to do it? Do I just go into my D drive and delete all the files inside it? such program files x86 etc? while running window 8 I managed to get a lot of spyware, adware etc on my system and hence why I preferred a clean install of windows 10.
View 1 Replies
Aug 26, 2015
After my Windows 10 upgrade was finished I created a "Recovery drive" on a 32 GB flash drive and it filled the drive to 26.8 GB. I just finished a clean install on my hard disk with all unallocated space and decided to make a new "recovery drive" on the old flash drive when I was finished. I did "check" to include system files and the process took quite a while but only 3.5 GB are now being used on the flash drive. Why such a difference in data this time than before? Is this drive okay?
View 1 Replies
Oct 16, 2015
I recently messed up a previous Win10 installation and had to use gparted (kept saying the drive was locked when I tried to use Recovery CD) to delete partition and start from scratch. Everything installed fine like before but now when I start up or restart laptop I get the option to boot either Windows 10(previous install) or Windows 10 on volume 2(new working install).
How do I get rid of that previous install option so i can go straight to boot up?
View 8 Replies
Jan 11, 2016
Due to a reinstall my laptop had a dual boot system with windows 10 twice installed. Now I was finished with the migration and I used EaseUs Partition Master to remove the old partition and add the space to the new partition. But now my windows doesn't boot anymore. It gets to the windows logo and the waiting icon under it, but it doesn't go to the user logon screen.
The old situation before the resize was:
Win 10 (old) 30 gb
Win 10 (new) 220 gb
View 2 Replies
Aug 29, 2015
I have a Windows 8.1 PC with UEFI BIOS. I am going to upgrade this Windows with Windows 10. I downloaded the ISO because recently I formatted this PC so inorder to get the free upgrade is a long way! Unfortunately, the ISO I downloaded is an All-In-One type and is about 4.8GB, So for the UEFI to boot the flash drive, it needs to be FAT-32 but since the install.wim is more than 4GB, that won't work. So instead of downloading another x64 bit ISO which would take about a day in our area. I need to know if I can extract a single version i.e. Windows 10 Single Language x64 from the All-in-One ISO?
View 9 Replies
Nov 7, 2015
My sons computer has a legit copy of windows home but for some reason the installed version was 32 bit, I noticed later that the machine was x64 bit processor.
I installed windows ten prior to noticing the version, I would like to change it to x64 bit, I read a few threads on converting, I downloaded the x64 ISO and burnt it to a DVD.
I am not concerned about wiping the drive clean everything needed has been removed and copied.
I read about skipping the key as it is being installed and that a key would be issued by Microsoft based on the hardware of the machine.
I am curious, would the key for the original 32 bit installation be the one that would be inserted in the x64 bit install or would a different key be issued?
View 8 Replies
Jul 30, 2015
When upgrading to Windows 10, I clicked to download the 64-bit version however when I finished installing it was a 32-bit version.
View 2 Replies
Jun 5, 2015
I keep reading that the release version of W10 will update any W7 or W8 installation.
What happens with a Preview version? I am running it only now, and just wonder how that update will work. Do I have to go back to W8.1?
View 9 Replies
Sep 4, 2015
I have upgraded my OS to Windows 10 which has DirectX version 12.
After upgrading, I installed GTA4 game in it. Now directx version changed to 10.1.
How can I get directX 12 back?
View 9 Replies
Aug 23, 2015
I have BizSpark, and I'd like to upgrade my Windows 10 Home computer to the Pro version. I downloaded the "Multiple Versions" ISO from MSDN, but when I run it from within Windows, it only lets me re-install the Home edition. How do I upgrade without doing a clean install?
View 9 Replies
Feb 10, 2016
Yesterday I decided to download WIN 10 Pro 64 bit with the media creation tool to generate an ISO file as I needed to do a fresh install on several machines. I had assumed that I would get the current 1511 version but I got the previous 10240 version . Now I know that MS pulled this November update after a dew days of release but then re-instated again on the 24th Nov. My broadband speed is "pathetic" so I had to download the 1511 upgrade once the initial installation was finished. This meant 18 hours had to elapse and I will still have to download the TH2 upgrade on every machine--will stick with Win 7 !
why I got the old version of Win 10 ?
View 9 Replies
Nov 15, 2015
I am running Windows 10 Pro x64 that I installed as a full version (not from the free update, I purchased the full edition from Microsoft).Whenever I get a new OS I like to do a clean install so I used the Microsoft Media Creation Tool which I downloaded from this page. I used the Media Creation Tool to install the OS (wiped and created new partitions, installed the OS, etc.).
Now with this nightmare update they just released (Version 1511) I am having SO many issues. I would like to do another fresh install of this new version.If I use the Media Creation Tool again to create an USB installer will it contain this latest version (i.e. I won't have to go through the whole update process again)? Or does the Media Creation Tool only create a USB installer that contains the "base" operating system which will required updates all over again?If not, how can i create an installer for Version 1511 so that I can avoid the pain of updating?
View 6 Replies