Installation :: Cannot Install - Getting A Failed Message Error 8007000D
Oct 2, 2015Have not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 RepliesHave not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 RepliesI am trying upgrade to Windows 10 from my Windows 7 Ultimate. I downloaded and tried to install Windows 10 and it failed I got the error message 8007002c-4000d and when I tried to install it again Windows is saying - Windows isn't activated on this pc. use a product key to activate it before upgrading to windows 10. I don't know what my product key is but it shouldn't ask me what it is...
View 1 RepliesIn windows update i have on 3 occasions over 2 days where it says upgrade failed. got me puzzled. i have all the updates
View 5 RepliesI guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
Just installed Win10 on a Win7 machine. Started it up and walked away.
Came back 3hrs later and all that was on the screen was this message:
Cannot Display this Video Mode. Optimum Resolution 1280 x 1024 60Hz
I can restart the machine and the normal Dell start up stuff happens. The Win10 logo comes up and then the screen goes black with the above message. No cursor. No nothing.
I cant even get the monitor settings to function once the black screen appears.
I can get into the monitor settings during boot up but cant make any changes before the black screen comes up.
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
View 2 RepliesAlthough I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesMy Windows 7 was updating to Windows 10. When it appeared to almost be done configuring a message appeared stating the Windows 10 could not be installed and it was restoring the previous version of Windows.
Well that did not work. The pc will not boot up now. Instead I get: "Windows could not start because the following file is missing or corrupt: <windows root>system32hal.dll Please reinstall a copy of the above file"
I hope I can add the file using the win7 dvd. I know I was getting low on hard drive space, but had cleared enough to have 4 gig or so free. It was either not mentioned anywhere or I missed how much hd space would be needed. Of course I am assuming that the install bombed due to this?
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
I received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 RepliesA friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
View 1 RepliesStill trying to update to windows 10. Have updated windows 7 w/sp1 and have checked that my computer is ready for update 10. Everything goes great until final shut-down and restart.Then I get black screen with Blue Flag and locks up, will not go any further. After 5 hours of waiting tried turning off and it restarted and gave this error message: Instalation failed in the safe OS phase with error during Boot. 0xC1900101-0x20017
View 3 RepliesI have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
The upgrade process seems to go on Ok, but, near the end I see this message:
"The drive where Windows is installed is locked. Unlock the drive and try again.
"Errors 0xC1900101-0x20017
"The installation failed in the SAFE_OS phase with an error during BOOT operation.
I'm having the "Failed to connect to a Windows service. Windows couldn't connect to the Group Policy Client service. This problem prevents standard users from signing in" message in my laptop. It was updated from Windows 8 to 10 when we purchased it. At the beginning the laptop works well but now i'm having this message. I saw the a video and the GPC status is not running and in HKEY_LOCAL_MACHINE/SYSTEM/CURRENT CONTROL/SERVICES/GPSVC in the Image Path is netsvcs instead gpsvdGroup.
The problem is that when i went to SOFTWARE/MICROSOFT/WINDOWS NT/CURRENT VERSION/SVCHOST And then to the netsvcs I did'n t have to add it because it is already there, it was not missing. I verified Dword values and all of them have the same values as recommended in the video.
I'm booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
all that's plugged in is the ssd, monitor, ram, and keyboard/mouse
So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
[URL] ....
Asus laptop : Ux305
Download ISO from media tool creation, then using rufus to create bootable usb
After run setup, this error pop up
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
I am trying to do a clean install of windows 10 on a new SSD on an HP Pavillion purchased in 2009 or 2010. I am booting from a DVD. All is going well in the beginning of the install. I get past the product key verification and partition section. Once it starts copying the windows file during the install it has been giving me the following error message and stopping the install:
"Windows cannot install required files. The file does not exist. Make sure all files required for installation are available and restart the installation. Error code: 0x80070003."
It has made it to different percentages of copying files before it gives me the error. Once I believe it made it almost to 100% and then gave me the error.
I have since re-downloaded the ISO twice onto different discs with no success. Have called microsoft support with no success. Tried booting from USB but the computer does not seem to support it. Tried updating bios but no newer versions were available.
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
Why is this happening, and how do I resolve it?
When I try to upgrade Windows 8.1 with Bing tablet to Windows 10 in Windows update i get Error Code 8007003 in preparing to install phase.
When choosing try again it re downloads everything and same error appears.
I tried cleaning Windows Update files and running troubleshooter but it doesn't work.
If I try to upgrade from windows 10 home ISO will my activation be fine.
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 RepliesI have started to get the following error message when I load my desktop from startup:'The group or resource is not in the correct state to perform the requested operation'.
View 1 RepliesI just downloaded winzip and it keep giving me this error message:
Javascript is disabled please turn on the IE setting or allow JS running to complete the installation.
How do i do this?