Installation :: Changing UEFI Settings?
Jul 18, 2015In Windows 8 there a way to change settings in your PC's UEFI firmware. Is this possible in W10?
View 1 Replies
Similar Messages:
Installation :: UEFI BIOS Settings To Prepare For Installation
Aug 31, 2015Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?
View 3 RepliesChanging BIOS Legacy To UEFI With Clean Install?
Sep 14, 2015I have a Toshiba that I wanted to run Windows 10 Pro, the OEM was Home; I have Windows 7 Pro and decided to install that and do the upgrade and then a clean install, I needed to run Legacy Mode to install Windows 7, after the install and upgrade I wanted to change it to UEFI but since that isn't possible to do without doing a clean install or a recovery media device, I can't and don't want to do that.
If I do a clean install of Windows 10 Pro, from a USB and delete all partitions, will Windows 10 activate?
I have done so on my desktop, it has worked, BUT when I did it on my Toshiba after it activated to Windows 10 Home, it failed to activate during the clean install. What are the chances it won't activate this time? The process from Windows 7 to 10 isn't fast and I don't want to have to do that again..
Cannot Access Uefi Firmware Settings
Feb 23, 2016So Im trying to install a new graphics card, and I have to tweak some settings in the bios. Unfortunately, when I try to open it(pressing escape at startup, scrolling down, and selecting uefi settings and pressing enter) nothing happens. I looked this up, and it said to go to advanced startup and go through some steps to get to a menu that supposedly contains "uefi firmware settings". Now, I confirmed that this is the right menu, but the option is just not there. I thought about updating my BIOS, but there are no updates for it available.
View 9 RepliesToshiba Satellite M645 / UEFI Settings Not Available
Dec 21, 2015I have a Toshiba Satellite m645 with Windows 10. I'm seriously trying everything just to access the UEFI/BIOS settings on this computer. I know that you have to go to Update & Security and reboot through the advanced settings. Then you click troubleshoot and in that menu should hold a uefi settings option but my computer just doesn't and I'm not able to press esc/f2 on startup to access bios either because that simply doesn't work. Why don't I have a uefi settings option?
View 4 RepliesDrivers/Hardware :: UEFI Firmware Settings Screen?
Oct 30, 2015I upgraded to Windows 10 from Windows 7 (32Bit), Since, I have lost access to my DVD drive. The Device Manager shows:
The drive has always been connected and worked fine with Windows 7; the hardware has never been altered or messed about with.
So I decided to check the UEFI Firmware Settings via Settings>Recovery>Advanced Set Up>Troubleshoot>Advanced Options I don't get the option to enter UEFI Firmware Settings; All I get is the System Restore, System Image Recovery, Startup Repair, Command Prompt and Startup Settings.
Installation :: Apple MBP / UEFI Installation Won't Boot After Image Apply
Aug 25, 2015last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
Changing User Control Settings Error
Aug 17, 2015How can I enable full user control without getting a ton of "failed to enumerate" errors after clicking apply? Can't even install printer software to Program Files.
Such hoops to jump through...
Changing Personalization / Background / Theme Settings
Aug 8, 2015So yesterday I installed 10 on the laptop. It appears to work very well, even though it seems, and is, intrusive (privacy concerns) and for me a long learning curve to figure out how all the new 'apps' (old redesigned programs and UI) work.
Here's the problem:
I have read through this tutorial (plus many other posts and articles): [URL]
I want/need to change the timing of the background pictures/theme and the colors of the window from the stock (forced upon me) settings, but the display does NOT show the controls in the bottom of the personalization area as they are shown in that tutorial (They were there in W7 and Vista, and in the tutorial above made in March).
I have tried different resolutions (none smaller available, currently at 1366x768, native), and only two font/display/text sizes I could find of 100% and 125%: The needed controls still don't show up.
The laptop is an ASUS G50VT - 5. Stock except for a 500GB Hybrid drive.
Locked Out Of Administrator After Changing Account Settings
Sep 27, 2015I changed the settings on 'netplwiz', and made the account 'Homegroupuser$' an administrator, and removed the administrator privileges for the account i use. now i cant access any administrative settings.
View 1 RepliesInstallation :: Switching Motherboards With UEFI Installation?
Aug 23, 2015I currently plan on doing a clean install on a new ssd of Windows 10. My current mobo is a ASUS P8z68-V which has UEFI so I plan on doing a UEFI installation of Windows 10. However, I plan on getting a new processor and motherboard sometime in the future, so would I have to do a reinstall of Windows 10 when I get my new motherboard, or could I expect it to boot up normally as would a traditional BIOS system would work?
View 4 RepliesBSOD :: Laptop Crashed After Changing Settings For Password
Oct 27, 2015Windows kept asking me for the password upon startup and would not recognize the password I input each time. So I would have to reset it. I went to the forum and read how to shut the password feature off by holding the windows key + r , typing the letters provided and unchecking the box. The system then asked me to restart. My laptop will not restart - blue/black screen appears and nothing else.
View 4 RepliesLAN Connection Keeps Changing From Automatically Detect Settings To Proxy Server
Sep 15, 2015This issue happened after I upgraded to Windows 10 from Windows 7 on my HP computer. We also have another older Dell computer, on which this issue did not occur after upgrading to Windows 10 from Windows 7. I followed advise from an IT technician provided about this issue with Windows 8.1 including editing the registry (Internet Settings and Default Connection Settings) and have no trouble accessing the internet. However, typically after every day or every other day (at most after three days) turning my computer on after being off overnight, the internet connection settings revert back from automatically detect settings to proxy server.
I do not use a proxy server and cannot access the internet when this occurs. This keeps happening even though I go back and reedit the register. What can be done to permanently fix this problem? I am currently using Internet Explorer 11 instead of Edge until Microsoft comes out with their update in early November that allows extensions. I use Norton 360 and cannot use this program with Edge until extensions are allowed, because of security on the internet.
Since this does not happen with the Dell computer, I checked the settings mentioned by the IT Technician and found that the following Internet Settings were not present in the registry: ProxyHttp.1 (or ProxyHttp1_1) and ProxyServer. Will it harm my HP computer if I delete these two from the registry so that the Internet Settings will be the same as those on the Dell computer, which as pointed out above does not have this problem? Also, for ProxyServer the IT technician indicated that there should be no value for this in the registry.
Installation :: Making UEFI And MBR Muitiboot USB
Feb 10, 2016I just brought a 128GB sandisk ultra usb 3.0 because as a computer tec im tired of fumbling through my tons of usb drivers to do a job. , i want my windows installers & Linux, bookable tools and such all in one usb. so i looked into multibooting usbs and came across many tools, one being SARDU. But i need a hybird UEFI/MBR boot and my laptop doesn't support uefi & legacy simultaneously only one or the other.
So using SARDU i cant see or boot from the usb unless i switch bios to legacy mode, works well because i see and can boot from all of what i have windows installers and linux distros but i have to keep switching back and forth between legacy and uefi. i was wondering if i can make the usb primarily Uefi bootable BUT also bootable for a old MBR if needed.
Installation :: How To Create UEFI Install DVD
Jan 7, 2016I'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
View 4 RepliesInstallation :: USB Not Appearing In UEFI Boot Sources
Feb 10, 2016i've installed windows 10 on linux before and i've never had any problems booting it (from what i remember, through UEFI boot sources). currently the windows 10 iso seems to be the only one that isn't appearing in UEFI; i installed peppermint from lubuntu using the same image disk writer on the same usb 30 minutes ago.am i supposed to have some specific settings enabled/disabled in my bios to boot the windows install? secure boot is disabled and legacy boot is enabled.
View 2 RepliesInstallation :: How To Install On RAID 0 Non UEFI System
Feb 10, 2016I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
Installation :: After Upgrade Revert To W8.1 On UEFI Machine
Jun 4, 2015Assume a computer with the UEFI firmware interface.
Assume that during or after a user has upgraded a W8.1 machine to W10 things go horribly wrong - Black screen, Blue screen, No screen. The user now tries to Boot from a USB Emergency Boot Disk that they previously created using the W8.1 utility and then they try to restore W8.1 from a System Image Backup (the one in File History) that they previously created.
Will this be possible and will the Product Key in the UEFI firmware allow a reinstall of W8.1 after a W10 upgrade...?
Installation :: Can't Install Update - UEFI Error?
Dec 23, 2015So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
[URL] ....
Installation :: Stuck In UEFI After Reset To Default
Feb 10, 2016After resetting UEFI to default values, I can't start WIndows because boot goes to UEFI.
I wanted to make a clean install of W10 and for that I had to make some changes in UEFI because it wouldn't allow me otherwise. But after the installation I see that I have some problems with the sleep and fast boot, not working well. So I went to UEFI and reset it to default, saved and exit. On boot, it goes to UEFI once and again. Windows doesn't load.
So I have to do the same changes that I had to do for installing W10. Disable fast boot, etc. And then yes, I get to Windows, but keep having the same sleep and boot problems. Both work really bad in different ways.
I also did other changes, by the way. I couldn't install W10 because it said that my disk was GPT partition style, so I had to follow some instructions to change that, which wiped my disk and partitions completely and maybe I missed some step...
Installation :: How To Install UEFI On Dell Inspiron 15 7559
Feb 23, 2016As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6
GPT Partition Scheme for UEFI
Fat 32
8192 Default
X Quick Format
X Create a bootable disk using
X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
Installation :: Booting DVD In UEFi Mode For Windows Install
Sep 1, 2015How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
Installation :: Windows Won't Boot In UEFI Mode - Deleted EFI Partition
Aug 25, 2015Okay, so the other week i received a new Clevo P650SE laptop. The laptop only had a 500GB 7200RPM HDD with Windows 10 to begin with, so yesterday i added my Samsung 840 EVO SSD. As i wanted this to now be the primary drive, i made another new installation of Windows onto here. After doing this, the system now displayed a boot selection at startup with the choice between the new Windows 10 installation on my SSD or the old one on the HDD.
As i no longer wanted to use the HDD for running Windows, i decided it would be best to delete Windows from this drive. So i booted onto an Ubuntu USB and wiped the entire drive of it's data in GParted, which included three different partitions. This seemed perfectly fine to me at the time, because i had a the new installation from the SSD showing up in the boot manager.
However, when i rebooted the machine and attempted to boot into the new installation on the SSD, it gives me this message:
"The boot configuration data from your PC is missing or contains errors.
File: /EFI/Microsoft/Boot/BC Error code: 0xc000000f"
I have tried everything to recover the system but nothing has worked. Startup repair from my Windows USB doesn't do anything, the system reset wouldn't operate because it stated that the partition was locked.
Nothing with the Command Prompt is working, I have done 'bootrec /fixmbr', 'bootrec /fixboot' and 'bootrec /rebuildbcd', but the last command returns the following error:
"The requested system drive cannot be found."
I also did 'bcdboot C:/Windows' but that also refused to work. I assumed the reason for this might be because the drive didn't have a letter, but when i attempted to add a letter is says:
"The specified drive letter is not free to be assigned."
Both drives in my laptop have now been completely wiped and converted to MBR, but even with the two drives empty the original message still appears when booting my Windows USB in UEFI.
I have only had this laptop a couple of weeks and it's already completely messed up. I can boot the Windows USB in Legacy and install Windows as normal, but of course i'm looking to have it back on UEFI as it was before.
Installation :: Will Clean Install Attempt Recognize Windows 8.1 UEFI Stored Key
Aug 4, 2015If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
Changing Installation Language
Oct 8, 2015changing language in newly purchased Dell Inspiron laptop from Japanese to English for installing files and programs from previous USA computer. We changed the display language but when installing, the language reverts back to Japanese.
View 1 RepliesInstallation :: Changing From 32 Bit To 64 Bit Home Version
Nov 7, 2015My sons computer has a legit copy of windows home but for some reason the installed version was 32 bit, I noticed later that the machine was x64 bit processor.
I installed windows ten prior to noticing the version, I would like to change it to x64 bit, I read a few threads on converting, I downloaded the x64 ISO and burnt it to a DVD.
I am not concerned about wiping the drive clean everything needed has been removed and copied.
I read about skipping the key as it is being installed and that a key would be issued by Microsoft based on the hardware of the machine.
I am curious, would the key for the original 32 bit installation be the one that would be inserted in the x64 bit install or would a different key be issued?