Installation :: Clean Install From A USB Drive
Aug 5, 2015I upgraded both of my PC's from Windows 8.1 Pro. If I want to do a clean install from a USB drive do I need one from each PC or will one work with both?
View 2 RepliesI upgraded both of my PC's from Windows 8.1 Pro. If I want to do a clean install from a USB drive do I need one from each PC or will one work with both?
View 2 Replieswhen I installed windows 7 Pro 64 bit on a new build, a few years ago, I had to install some specific drivers during the Windows 7 installation to ensure drives used AHCI mode. Do I still need to do anything during windows 10 clean install to new SSD drive in order to achieve this (I did not see anything in the clean install tutorial ) or is this all now taken care of in Windows 10?
View 9 RepliesI have successfully upgraded to Windows 10 from Windows 7 (and solved the initial network connection problems).
However my OS has a lot of crud from the pre-upgrade state and I would like to do a clean install of Windows 10, without losing any old data files. I've read online guides on doing clean installs of Windows 10, but it is not clear whether you can only install into partitions that already have a valid Windows OS installed.
My computer has two identical hard disks, one of which is (or can be made) blank so what I would like to do is keep one with the 'cruddy' version of Windows 10 - at least until I have copied over all the files I want to keep and made sure I've installed all the software I want on the new 'clean install' Windows 10.
So, are there people out there who have done this? Are there things I should look out for?
I currently have an ASUS motherboard (p9x79 Pro) and am running my operating system on a spinning drive and using the ASUS cache which uses a 128GB SSD drive to cache the operating system disk.I would like to dump that arrangement and run the operating system on a larger SSD drive (they are cheaper now). Ideally I would do this at the same time as moving to Windows 10 so that I only have to install once.
My question is - if I go for a clean install to Windows 10 can I put this directly onto a new clean SSD drive - using my old windows 7 key to activate it (it was an OEM key I bought when I built the system) or will I need to clone the Windows 7 system onto the new drive before installing?The motherboard will not be changed.
Yesterday I upgraded from Windows 8,1 to Windows 10. I wanted to clean install so I booted from my USB drive (which has the Windows 10 image and worked before on my other PC) and it didn't work.
Something was corrupt with my registry on the C: drive so I formatted it. Now I can't boot obviously and I get odd error messages like bad_config_info or something like that. I can't even clean install on the damn drive, it gets stuck after copying files.
I really need my laptop ready over the weekend, because my current PC is garbage and also blue screens with Memory_Management. I'm not even bothering with that on a 6 yr old PC.
ERROR CODE 0x80070570
I previously used windows xp and just went and bought a new hard drive and windows 10 usb. I installed the hard drive along with my old master drive, using it as slave i presume. Will it auto partition the new hard drive..
View 5 RepliesI am about to get a new 240Gb SSD and have been advised to clean install Windows 10 on it. This SSD will replace a SATA HDD in my existing computer running Windows 8.1. I know that I qualify for the free upgrade; I have the "Get 10" icon on my task bar.
My first question is, can I get the 10 installation media without buying it and if so, how?
Do I need to upgrade the computer to 10 before replacing the OS hard drive with the new SSD and clean installing?
I have a laptop and a desktop with a 120 gig ssd and a 64 gig SSD respectively. Both computers have conventional hard drives as drive D. I have two 250 gig SSD's on the way. What is the best strategy for moving to the new SSD's and preforming the clean install of Windows 10. The desktop is running Windows 10 insider preview 130 and the laptop is on Windows 8.1.
View 5 RepliesI have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 RepliesDrives:
C:/ (HDD)
S:/ (SSD)
O:/ (SSD)
Right, I have my OS (Windows 10) installed on the C:/ drive, but I'd like to reinstall it on the O:/ drive. I've only come across one way of doing it:
Clean installation, then copy/move the C:/ drive's content to the O:/ drive.This is what I'm aiming for:
-Having my OS moved from the C:/ to the O:/ drive.
-Cleaning the C:/ drive from all data.
-Keeping the S:/ drive untouched, no problem I'd say.
-Possible: Having the C:/ and O:/ drives switch names after the installation (So the SSD with the newly installed OS would be named C:/.).
Is this possible to do this in one move and use the same Windows 10 key?
So, one day i was just thinking of doing a clean install of Windows from a bootable USB drive and after i got everything set up, clean installation done and ready to go i noticed that.. Windows only created one drive, and that's my lonely C: drive with the space of my old C: drive and D: drive together. So practically, it blended those two drives together, since im pretty sure i did everything correct on the clean installation but this is the result. Is there any ways to fix this situation WITHOUT going back to a restore point or without another clean installation of Windows from a bootable usb drive?
I have tried installing the Windows again from the settings of the Windows but it did not work and the problem still persists. Also, while i was doing the new install of the Windows, it threw me an error of the drive being GBT (or something along the lines) so i had to run cmd in the installer and clean disk 0 to make it work. and By doing that, it didnt show those 7-8 drives i had on the list in the installer but it actually deleted all of those 8 and left 1 standing so i clicked ''new'' and it made only one more that was called ''system memory'' or something along those lines.
My Computer is an Asus notebook x551ca.
I have a laptop with a retail copy (bought from store) of windows 7 home premium installed on it.
I just bought a new SSD drive that I want to replace with the HDD drive that's currently in the laptop.
Now to get Windows 10 on that SSD drive after I swap it do I need to first install my windows 7 home premium onto it then upgrade to Windows 10 , then do a clean install?
I have upgraded my pc and surface pro to windows 10 and now I want to download the iso for USB to do a clean install on my surface pro. I have the media creation tool. I launch that, select my version, etc., then when I get to the screen where it would create media to USB, it says that there is no USB connected. I am having this issue on both the desktop and the surface. Is there something I am doing wrong? Do I need to format or configure the flash drive a certain way for it to show up to the media tool? My computer is certainly reading that the flash drive is connected.
View 10 RepliesFor example, I have Windows 10 on my main HDD and was wondering... If I hit the reset this PC button and reinstall Windows can I install it to my SSD from the main disk? Or will it only install to its current location?
View 1 RepliesI am looking to upgrade from Windows 7 to 10. I have a PC with Windows 7 and core applications on an SSD. For storage I have a 1TB HDD. I have heard that the clean install of Windows 10 is the way to go but I don't want to go through the trouble of backing up everything. I was wondering if I can do a clean install on just the SSD, so the hard drive remains unaffected, but the SSD is wiped and a clean Windows 10 is installed.
View 1 RepliesI recently upgraded my Windows 7 laptop to Win10. However, before I did the upgrade, I did a clean factory install of Win7, kept installing Automatic Updates until I get the option to Upgrade to Win10.
I have a 500gb HDD, that is partitioned in to two, C: for OS and D: for Local Disk (storage), currently the C: drive is 58.5gb, of which I have 13.5gb left, this is with having only Windows 10 installed AND Printer Driver and Software.
Is there any benefit of creating the Windows 10 media disk, reformatting with this Win10 disk, and getting rid of any of the rubbish that might of been installed in the process of doing a clean install of Win7.
OR re partitioning the Drive, so I can steal some of the storage from D: and give it to C: . I have 397GB of unused space on D:
I also just noticed, it states I have a Partition called RECOVERY, however, I don't seem to have this on My Computer view.
Upgraded to windows 10 pro via the media creation tool...its activated and going pretty well..so now i want to format my hard drive and clean install it...how can i do this safely? and will it be deactivated if i do a format?
View 1 RepliesI just upgraded to Windows 10 and I would like to do a clean install. However My PC has a 1tb HDD as the C: drive and a secondary 25gb SSD drive called D:. I was wondering if there is a way to install the OS on the D: drive. I have done OS installs before so I am somewhat familiar with the procedure. I also already have a Windows 10 install USB set up. I just can't get it to offer the option of which drive to install on. The D: drive does currently have a folder on it labeled Drivers and in that folder there 14 folders such as Bluetooth, WLAN , and Card reader. Is this going to be an issue when installing Windows 10 on the D: drive or will Windows re-download these drivers itself?
View 1 RepliesI have installed Windows 10 on a new clean hard drive because the old one with Windows 8 died but the new one with Windows 10 wont show any wireless connections. By the way the computer I'm typing on is Windows 10.
View 1 RepliesMy laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 RepliesI'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 RepliesAll the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 RepliesSo I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Any way to downgrade to my old windows 7.
I originally followed the path to upgrade my 8.1 Pro to Windows 10. Everything went fine and I created the USB during the process. Activation was OK.
Then after a few days and some unusual problems I reloaded my last Image of 8.1 Pro.
Question is Can I go back and just do a clean install since I have already did the upgrade process?
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....